Journal and congress contributions

    1. Tsotsas, E., Gogousis, A.: The field of heliostats of a 5 MWe central-tower solar power-plant, (in griechischer Sprache), Proceedings of the first national symposium of the Greek Society for Regenerative Energy Forms, Thessaloniki, Oktober 1982
    2. Tsotsas, E., Schlünder, E.-U.: Der Wärmeübergang durch enge Gasspalte - Ein zentrales Problem bei gekühlten Chipträgern in Hochleistungscomputern, Chem. Eng. Process., 18 (1984), 25-29
    3. Tsotsas, E., Schlünder, E.-U.: Die Kontakttrocknung rieselfähigen, polydispersen Granulats im Vakuum, Chem.-Ing.-Tech., 56 (1984), 844-846
    4. Tsotsas, E., Schlünder, E.-U.: Contact drying of mechanically agitated particulate material in the presence of inert gas, in A. S. Mujumdar (ed.), Drying `86, Proceedings of the 5th Intern. Drying Symposium, Cambridge / Massachusetts, Hemisphere, Washington 1986, vol. 1, sect. III, 157-168
    5. Tsotsas, E., Schlünder, E.-U.: Contact drying of mechanically agitated particulate material in the presence of inert gas, Chem. Eng. Process., 20 (1986), 277-285
    6. Tsotsas, E., Schlünder, E.-U.: Vacuum contact drying of free flowing mechanically agitated multigranular packings, Chem. Eng. Process., 20 (1986), 339-349
    7. Tsotsas, E., Schlünder, E.-U.: Contact drying of polydispersed free flowing granular material, in "Current research in heat and mass transfer  -- A Compendium and a Festschrift for Professor A. Ramachadran“, Hemisphere, Washington, 1986, 259-275
    8. Tsotsas, E., Schlünder, E.-U.: Heat transfer through narrow gas gaps: a crucial problem in cooled-chip supports in high-capacity computers, Int. Chem. Engng, 27 (1987), 34-39, (eingeladene englische Übersetzung)
    9. Tsotsas, E., Schlünder, E.-U.: Heat transfer during evaporation and condensation of binary mixtures, Chem. Eng. Process., 21 (1987), 209-215
    10. Tsotsas, E., Schlünder, E.-U.: Vacuum contact drying of mechanically agitated beds: The influence of hygroscopic behaviour on the drying rate curve, Chem. Eng. Process., 21 (1987), 199-208
    11. Tsotsas, E., Martin, H.: Thermal conductivity of packed beds: A review, Chem. Eng. Process., 22 (1987), 19-37
    12. Tsotsas, E., Schlünder, E.-U.: Some remarks on channeling and on radial dispersion in packed beds, Chem. Engng Sci., 43 (1988), 1200-1203
    13. Tsotsas, E., Schlünder, E.-U.: Contact resistance between rigid walls and particles and its importance on modeling heat transfer to fixed, moving, agitated and fluidized beds, Proceedings of the Eurotherm 4, Thermal transfer in composite materials and at solid-solid interface, 28. Juni - 01. Juli 1988, Nancy / France
    14. Tsotsas, E., Schlünder, E.-U.: On axial dispersion in packed beds with fluid flow, Chem. Eng. Process., 24 (1988), 15-31
    15. Tsotsas, E., Schlünder, E.-U.: Strömungsungleichverteilung und axiale Dispersion in Festbetten, Chem.-Ing.-Tech., 61 (1989), 243-246
    16. Tsotsas, E., Martin, H.: Wärmeübertragung zwischen einer Wand und dispersen Gas/Feststoff-Systemen, Chem.-Ing.-Tech., 61 (1989), 677-686
    17. Tsotsas, E., Schlünder, E.-U.: Heat transfer in packed beds with fluid flow: Remarks on the meaning and the calculation of a heat transfer coefficient at the wall, Chem. Engng Sci., 45 (1990), 819-839
    18. Tsotsas, E., Schlünder, E.-U.: The influence of tube to particle diameter ratio on pressure drop in packed tubes: Remarks on a recent paper by Chu and Ng, AIChE J., 36 (1990), 151-154
    19. Tsotsas, E., Schlünder, E.-U.: Measurements of mass transfer between particles and gas in packed tubes at very low tube to particle diameter ratios, Wärme- und Stoffübertragung, 25 (1990), 245-256
    20. Tsotsas, E., Schlünder, E.-U.: Numerical calculation of the thermal conductivity of two regular bidispersed beds of spherical particles,  Computers Chem. Engng, 14 (1990), 1031-1038
    21. Tsotsas, E.: Eine einfache empirische Gleichung zur Vorausberechung der Porosität polydisperser Kugelschüttungen, Chem.-Ing.-Tech., 63 (1991), 495-496
    22. Tsotsas, E., Schlünder, E.-U.: Impact of particle size dispersity on thermal conductivity of packed beds: Measurement, numerical simulation, prediction, Chem. Eng. Technol., 14 (1991), 421-427
    23. Tsotsas, E., Martin, H.: Heat transfer between a wall and gas-solid dispersed systems, Int. Chem. Engng, 31 (1991), 629-641, (eingeladene englische Übersetzung)
    24. Tsotsas, E.: Physiologische Aspekte der Wärmeübertragung, Fridericiana / Zeitschrift der Universität Karlsruhe, Heft 46 (1992), 35-43
    25. Tsotsas, E.: Transportvorgänge in Festbetten: Geschichte, Standpunkt und Perspektiven der Forschung, Chem.-Ing.-Tech., 64 (1992), 313-322
    26. Tsotsas, E.: On mass transfer, dispersion, and macroscopical flow maldistribution in packed tubes, Chem. Eng. Process., 31 (1992), 181-190
    27. Tsotsas, E.: Measurement and modelling of intraparticle drying kinetics: A review, in A. S. Mujumdar (ed.) Drying ´92, Proceedings of the 8th Intern. Drying Symposium, Montreal/Canada, Elsevier, Amsterdam 1992, 17-41
    28. Tsotsas, E.: Low Péclet number transient heat transfer in packed beds: Reevaluation of the data of Donnadieu, Chem. Engng Sci., 48 (1993), 3434-3437
    29. Tsotsas, E., Schlünder, E.-U.: Comment on studies on axial dispersion in fixed beds, Chem. Eng. Process., 33 (1994), 107-111
    30. Tsotsas, E.: From single particle to fluid bed drying kinetics, Drying Technology, 12 (1994), 1401-1426
    31. Tsotsas, E.: Discrimination of fluid bed models and investigation of particle-to-gas mass transfer by means of drying experiments, Chem. Eng. Process., 33 (1994), 237-245
    32. Tsotsas, E.: Wärmeübertragung in Festbetten, Preprints der Vortrags- und Diskussionstagung „Fortschritte in der Technik der Wärmeübertragung“, GVC-W, Baden-Baden, 29./30. Nov. 1994, Paper 11
    33. Tsotsas, E., Bellgardt, D.: Practical and theoretical aspects of fluid bed drying, Proc. Int. Symp. of Engng Foundation „Fluidization VIII“,  Tours/France, 1995, 1043-1050, als ausgewählter Beitrag auch in: Fluidization VIII, Large, J.-F., Laguérie, C. (eds), Engineering Foundation, New York, 1996, S. 519-526
    34. Groenewold, H., Tsotsas, E.: A new model for fluid bed drying, in C. Strumillo, Z. Pakowski (eds), Drying ´96, Proceedings of the 10th Intern. Drying Symposium, Krakow/Poland, Drukarnia Papaj, Lodz 1996, 315-322,  als ausgewählter Beitrag auch in Drying Technology, 15 (1997), 1687-1698
    35. Hirschmann, C., Tsotsas, E.: Einfluß der Porenstruktur auf den Stofftransport am Beispiel der Trocknung, Freiberger Forschungshefte, A849 (1998), 74-83
    36. Burgschweiger, J., Tsotsas, E.: A population balance model for fluidized bed drying, in C.B. Akritidis, D. Marinos-Kouris, G.D. Saravakos (eds), Drying ´98, Proceedings of the 11th Intern. Drying Symposium, Halkidiki/Greece, Ziti editions, Thessaloniki 1998, 134-141
    37. Hirschmann, C., Tsotsas, E.: Impact of pore structure on particle-side drying kinetics, in C.B. Akritidis, D. Marinos-Kouris, G.D. Saravakos (eds), Drying ´98, Proceedings of the 11th Intern. Drying Symposium, Halkidiki/Greece, Ziti editions, Thessaloniki 1998, 216-223
    38. Hirschmann, C., Fyhr, C., Tsotsas, E., Kemp, I.C.: Comparison of two basic methods for measuring drying curves: Thin layer method and drying channel, in C.B. Akritidis, D. Marinos-Kouris, G.D. Saravakos (eds), Drying ´98, Proceedings of the 11th Intern. Drying Symposium, Halkidiki/Greece, Ziti editions, Thessaloniki 1998, 224-231
    39. Groenewold, H., Tsotsas, E.: Predicting Sherwood numbers in fluidized beds, in C.B. Akritidis, D. Marinos-Kouris, G.D. Saravakos (eds), Drying ´98, Proceedings of the 11th Intern. Drying Symposium, Halkidiki/Greece, Ziti editions, Thessaloniki 1998, 192-199, als ausgewählter Beitrag auch in Drying Technology, 17 (1999), 1557-1570
    40. Groenewold, H., Tsotsas, E.: Heat transfer from a surface to wet fluidized particles during drying, in C.B. Akritidis, D. Marinos-Kouris, G.D. Saravakos (eds), Drying ´98, Proceedings of the 11th Intern. Drying Symposium, Halkidiki/Greece, Ziti editions, Thessaloniki 1998, 184-191
    41. Tsotsas, E.: Achievements, challenges and perspectives in modelling and design of convective dryers, in C.B. Akritidis, D. Marinos-Kouris, G.D. Saravakos (eds), Drying ´98, Proceedings of the 11th Intern. Drying Symposium, Halkidiki/Greece, Ziti editions, Thessaloniki 1998, 11-22
    42. Burgschweiger, J., Groenewold, H., Hirschmann, C., Tsotsas, E.: From hygroscopic single particle to batch fluidized bed drying kinetics, Can. J. Chem. Eng., 77 (1999), 333-341
    43. Winterberg, M., Tsotsas, E.: Das Nußelt-Graetz-Problem für gepackte Rohre, Transactions of the Tambov Technical University, 5 (1999), 68-82
    44. Burgschweiger, J., Wu, Y., Tsotsas, E., Döschner, C.: A process model for fluidized bed drying and its application for design and control, Proceedings of the 2nd European Congress of Chemical Engineering, Montpellier/Frankreich, Récents Progrès en Génie des Procédés, 13 (1999), No. 69, 153-160
    45. Winterberg, M., Krischke, A., Tsotsas, E., Vortmeyer, D.: On the invariability of transport parameters in packed beds upon catalytic reaction, Proceedings of the 2nd European Congress of Chemical Engineering, Montpellier/Frankreich, Récents Progrès en Génie des Procédés, 13 (1999), No. 65, 205-212
    46. Tsotsas, E.: Energetic optimization and product quality enhancement in solids processing: A dilemma?, Proceedings of the 6th Greek Conference of the Solar Technology Institute on the Optimization of Energy Processes, 03.-05. Nov. 1999, Volos/Greece (eingeladener Übersichtsbeitrag)
    47. Burgschweiger, J., Tsotsas, E.: Ein neues, schnelles Meßverfahren für Sorptionsisothermen - Anwendung auf Aktivtonerde, Chem.-Ing.-Tech., 72 (2000) 1 + 2, 88-94
    48. Winterberg, M., Tsotsas, E. , Krischke, A., Vortmeyer, D.: A simple and coherent set of coefficients for modelling of heat and mass transport with and without chemical reaction in tubes packed with spheres, Chem. Engng Sci., 55 (2000), 967-979
    49. Winterberg, M., Tsotsas, E.: Impact of tube-to-particle diameter ratio on pressure drop in packed beds, AIChE J., vol. 46 (2000), 1084-1088
    50. Winterberg, M., Tsotsas, E.: Modelling of heat transport in beds packed with spherical particles for various bed geometries and / or thermal boundary conditions, Int. J. Thermal Sci., 39 (2000), 556-570
    51. Tsotsas, E., Groenewold, H., Groenewold, C., Burgschweiger, J.: Static and dynamic models for drying in bubbling fluidized beds,  Proceedings of the 3rd European Conference on Fluidization, Toulouse/Frankreich, Récents Progrès en Génie des Procédés, 14 (2000), No. 75, 113-120
    52. Groenewold, H., Tsotsas, E.: Wall-to-bed heat transfer during fluidized bed drying, Proceedings of the 3rd European Conference on Fluidization, Toulouse/Frankreich, Récents Progrès en Génie des Procédés, 14 (2000), No. 75, 205-212
    53. Groenewold, H., Hirschmann, C., Burgschweiger, J., Tsotsas, E.: Comparison of convective drying kinetics of active and inactivated Al2O3,  Bulletin of the Polish Academy of Sciences, 48 (2000), No. 2, 369-382
    54. Groenewold, C., Möser, C., Groenewold, H., Tsotsas, E.: Determination of single particle drying kinetics in an acoustic levitator, in P.J.A.M. Kerkhof, W.J. Coumans, G.D. Mooiweer (eds), Proceedings of the 12th Intern. Drying Symposium, Noordwijkerhout/Netherlands, Elsevier 2000, Paper No. 58, als ausgewählter Beitrag auch in Chem. Eng. J., 86 (2002), 217-222
    55. Kaiser, S., Tsotsas, E.: Advoidance of fouling from dryer exhaust gases as a presupposition for efficient energy recovery – An experimental approach, in P.J.A.M. Kerkhof, W.J. Coumans, G.D. Mooiweer (eds), Proceedings of the 12th Intern. Drying Symposium, Noordwijkerhout/Netherlands, Elsevier 2000, Paper No. 55
    56. Groenewold, C., Groenewold, H., Tsotsas, E.: Interrelations between porous structure and convective drying kinetics in theory and experiment, in P.J.A.M. Kerkhof, W.J. Coumans, G.D. Mooiweer (eds), Proceedings of the 12th Intern. Drying Symposium, Noordwijkerhout/Netherlands, Elsevier 2000, Paper No. 59
    57. Groenewold, H., Tsotsas, E.: Experimental investigation and modelling of the influence of indirect heating on fluidized bed drying, in P.J.A.M. Kerkhof, W.J. Coumans, G.D. Mooiweer (eds), Proceedings of the 12th Intern. Drying Symposium, Noordwijkerhout/Netherlands, Elsevier 2000, Paper No. 39, als ausgewählter Beitrag auch in Drying Technology, 19 (2001), 1739-1754
    58. Schneider, M., Tsotsas, E.: Migration of residual moisture during the storage of particulates after drying, in P.J.A.M. Kerkhof, W.J. Coumans, G.D. Mooiweer (eds), Proceedings of the 12th Intern. Drying Symposium, Noordwijkerhout/Netherlands, Elsevier 2000, Paper No. 360
    59. Möser, C., Tsotsas, E.: Thermal effects during the desorption of ammonia from single drops, in E.W.P. Hahne, W. Heidemann, K. Spindler (eds), Proceedings of the 3rd European Thermal Sciences Conference, Heidelberg, Edizioni ETS, Pisa 2000, 1217-1222
    60. Post, S., Tsotsas, E.: Combined heat transfer, mass transfer and interface convection during evaporation of binary mixtures from planar gaps, in E.W.P. Hahne, W. Heidemann, K. Spindler (eds), Proceedings of the 3rd European Thermal Sciences Conference, Heidelberg, Edizioni ETS, Pisa 2000, 911-916
    61. Tsotsas, E.: Entwicklungsstand und Perspektiven der Modellierung von Transportvorgängen in durchströmten Festbetten, Chem.-Ing.-Tech., (72), 4, 2000, 313-321
    62. Winterberg, M., Tsotsas, E.: Correlations for effective transport coefficients in beds packed with cylindrical particles, Chem. Engng Sci., 55 (2000), 5937-5943
    63. Tsotsas, E.: Letter to the editor on „Experimental determination of transverse mixing kinetics in a rolling drum by image analysis“ by D.R. van Puyvelde, B.R. Young, M.A. Wilson and S.J. Smith (Powder Technology, 106 (1999), 183-191), Powder Technology, 114 (2001), 262-263
    64. Kemp, I.C., Fyhr, B.C., Laurent, S., Roques, M., Groenewold, C., Tsotsas, E., Sereno, A., Bonazzi, C., Bimbenet, J., Kind, M.: Methods for processing experimental drying kinetics data, Drying Technology, 19 (2001), 15-34
    65. Möser, C., Tsotsas, E.: Removal of ammonia from single water drops at normal and reduced pressure, Proceedings of the 3rd European Congress of Chemical Engineering, Nürnberg,  2001, Paper No. 459
    66. Beißner, H., Tsotsas, E.: Miscible displacement and diffusion during the removal of undesired liquids from porous bodies by washing,  Proceedings of the 3rd European Congress of Chemical Engineering, Nürnberg, 2001, Paper No. 436
    67. Post, S., Urukova, I., Tsotsas, E.: Microconvection during pervaporation of binary liquid mixture from planar gaps or packed layers,  Proceedings of the 3rd European Congress of Chemical Engineering, Nürnberg, 2001, Paper No. 446
    68. Kaiser, S., Tsotsas, E.: Formation of fouling layers and energy recovery from dryer exhaust gases, in O. Alvares-Filho, T.M. Eikerik, I. Strommen (eds), Proceedings of the 1st Nordic Drying Conference, Trondheim/Norway, 2001, Paper No. 16
    69. Schneider, M. Tsotsas, E.: On the predictability of silo rain: Modeling moisture migration in beds of particulates after drying, in O. Alvares-Filho, T.M. Eikerik, I. Strommen (eds), Proceedings of the 1st Nordic Drying Conference, Trondheim/Norway, 2001, Paper No. 15
    70. Groenewold, H., Tsotsas, E.: Experimental investigation of heat transfer from a cylinder to fluidized particles with a latent heat sink, in G.P. Celata, P. Di Marco, A. Goulas, A. Mariani (eds), Proceedings of the 5th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Thessaloniki/Greece, Edizioni ETS, Pisa 2001, 1717-1722
    71. Kaiser, S., Antonijevic, D., Tsotsas, E.: Formation of fouling layers on a heat exchanger element exposed to warm, humid and solids loaded air streams, in G.P. Celata, P. Di Marco, A. Goulas, A. Mariani (eds), Proceedings of the 5th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Thessaloniki/Greece, Edizioni ETS, Pisa 2001, 777-782, als ausgewählter Beitrag auch in Exper. Thermal and Fluid Sci., 26 (2002), 291-297
    72. Möser, C., Groenewold, C., Groenewold, H., Tsotsas, E.: Untersuchung der Kinetik von Trennprozessen im akustischen Levitator: Vor- und Nachteile, Chem.-Ing.-Tech., 73 (2001), 1012-1017
    73. Post, S., Tsotsas, E.: Analyse und Quantifizierung von während und aufgrund der Stoffübertragung eines binären Gemisches durch senkrechte Spalte induzierter Mikrokonvektion, Chem.-Ing.-Tech., 73 (2001), 1310-1314
    74. Tsotsas, E., Groenewold, H.: Combined convective and contact drying in fluidized beds, in C.W. Cao, X.D. Liu, Y.K. Pan, Y.X. Ou (eds), Proceedings of the 13th Intern. Drying Symposium, Beijing / China, 2002, Vol. A, 524-531
    75. Burgschweiger, J., Tsotsas, E.: Experimental investigation and modelling of continuous fluidized bed drying under steady-state and dynamic conditions, Chem. Engng Sci., 57 (2002), 5021-5038
    76. Tsotsas, E.: Product quality in drying – luck, trial, experience or science?, Proceedings of the 2nd Nordic Drying Conference (NDC’03), Kopenhagen/ Dänemark, 2003, Paper No. 76
    77. Peglow, M., Heinrich, S., Tsotsas, E., Mörl, L.: A generic model for investigating the influence of dispersion on fluidized bed evaporation and drying, Proceedings of the 2nd Nordic Drying Conference (NDC’03), Kopenhagen/ Dänemark, 2003, Paper No. 33
    78. Kache, G., Tsotsas, E., Evripidis, I.: Calculation of product temperature by short-cut tools for convective dryer design, Proceedings of the 2nd Nordic Drying Conference (NDC’03), Kopenhagen/ Dänemark, 2003, Paper No. 78
    79. Tsotsas, E.: Moderne Prozeß- und Produktgestaltung am Beispiel der Trocknung, Magdeburger Wissenschaftsjournal, 1,2 / 2003, 63-70
    80. Tsotsas, E.: Industrial convective drying: A unit operation on the way to process systems and product engineering, Proceedings of the European Drying Symposium (EU Drying 03), 2003, Kreta/ Griechenland, 15-27
    81. Stakic, M., Tsotsas, E.: Optimization of operational regimes for cross-flow grain dryers, Proceedings of the European Drying Symposium (EU Drying 03), 2003, Kreta/ Griechenland, 241-251
    82. Urukova, I., Post, S., Tsotsas, E.: Enhancement of mass transfer by microconvection during the evaporation of binary mixtures from porous layers, Proceedings of the 4th European Congress of Chemical Engineering (ECCE 4), 2003, Granada/Spanien, Paper No. P-7.1-012
    83. Kwapinski, W., Winterberg, M., Tsotsas, E.: Influence of flow maldistribution on packed bed adsorber performance, Proceedings of the 4th European Congress of Chemical Engineering (ECCE 4), 2003, Granada/Spanien, Paper No. P-5.5-007
    84. Silalahi, S.H.D., Hussain, A., Seidel-Morgenstern, A., Tsotsas, E.: Numerical and experimental investigation of heat transfer in the wall of membrane reactors, Proceedings of the 4th European Congress of Chemical Engineering (ECCE 4), 2003, Granada/Spanien, Paper No. O-5.2-004
    85. Hamel, C., Joshi, M., Tsotsas, E., Seidel-Morgenstern, A.: Aspects of describing stagewise dosing of reactants into fixed-bed and membrane reactors using 2D models, Proceedings of the 4th European Congress of Chemical Engineering (ECCE 4), 2003, Granada/Spanien, Paper No. P-7.2-049
    86. Heinrich, S., Peglow , M., Tsotsas, E., Mörl, L.: On the predictability of fluidized bed evaporation and drying: Analysis of mixing behaviour and transport phenomena, Proceedings of the 4th European Congress of Chemical Engineering (ECCE 4), 2003, Granada/Spanien, Paper No. P-8.4-018
    87. Salem, K., Mewes, D., Tsotsas, E.: Near infra-red tomography for concentration measurement of exhausting water vapour of a packed bed adsorber, Proceedings of the 3rd World Congress on Industrial Process Tomography, 2003, Banff/Canada, 199-206
    88. Beißner, H., Tsotsas, E.: Einfluss einer Gas-Flüssig-Grenzfläche auf die Waschkinetik poröser Stoffe bei Mischbarkeit von Beladungs- und Waschflüssigkeit, Transactions of the Tambov Technical University, 10 (2004), 101-113
    89. Kwapinski,W., Tsotsas, E.: Determination of drying or adsorption kinetics and equilibria on single particles by a magnetic suspension balance, Proceedings of the  4th European Thermal Sciences Conference, 2004, Birmingham/Großbritannien
    90. Hussain, A., Silalahi, S.H.D., Tsotsas, E.: Heat transfer in tubular, inorganic membranes, Proceedings of the 4th European Thermal Sciences Conference, 2004, Birmingham/Großbritannien
    91. Heinrich, S., Peglow, M., Tsotsas, E., Mörl, L.: Fluidized bed drying: Influence of dispersion and transport phenomena, in Silva, M.A., Rocha, S.C.S. (eds), Proceedings of the 14th International Drying Symposium, 2004, Sao Paulo/Brasilien, Vol. A, 129-136
    92. Kwapinski, W., Tsotsas, E.: Experimental determination of single-particle kinetics and equilibria for convective drying, desorption or adsorption by a magnetic suspension balance, in Silva, M.A., Rocha, S.C.S. (eds), Proceedings of the 14th International Drying Symposium, 2004, Sao Paulo/Brasilien, Vol. B, 1419-1426
    93. Stakic, M., Tsotsas, E.: Model-based analysis and optimization of convective grain drying process, in Silva, M.A., Rocha, S.C.S. (eds), Proceedings of the 14th International Drying Symposium, 2004, Sao Paulo/Brasilien, Vol. A, 381-388, als ausgewählter Beitrag auch in Drying Technology, 23 (2005), 1895-1908
    94. Metzger, T., Tsotsas, E.: Influence of pore distribution on drying kinetics: A simple capillary model, in Silva, M.A., Rocha, S.C.S. (eds), Proceedings of the 14th International Drying Symposium, 2004, Sao Paulo/Brasilien, Vol. A, 185-192, als ausgewählter Beitrag auch in Drying Technology, 23 (2005), 1797-1809
    95. Stakic, M., Tsotsas, E.: Modeling and numerical analysis of an atypical convective coal drying process, Drying Technology, 22 (2004), 2351-2373
    96. Kwapinski, W., Tsotsas, E.: Determination of kinetics and equilibria for adsorption of water vapour on single particles by a magnetic suspension balance, Chem. Eng. Technol., 27 (2004), 681-686
    97. Kwapinski, W., Winterberg, M., Tsotsas, E, Mewes, D.: Modelling of the wall effect in packed bed adsorption, Chem. Eng. Technol., 27 (2004), 1179-1186
    98. Salem, K., Kwapinski, W., Tsotsas, E., Mewes, D.: Tomographic investigation of the influence of wall effects on the breakthrough in a highly loaded packed bed adsorber, Proceedings of AIChE Annual Meeting, Austin/Texas, 2004
    99. Saage, G., Kapinska, M., Tsotsas, E.: Discrete element simulation of the mixing time of granular solids in rotary drums, in Y. Wang (ed.), Proceedings of the XIVth International Symposium on Trends in Applications of Mathematics to Mechanics (STAMM’2004), Seeheim/Germany, 2004
    100. Salem, K., Kwapinski, W., Tsotsas, E., Mewes, D.: Tomographic measurement of breakthrough in a packed bed adsorber, Chem. Engng Sci., 60 (2005), 517-522
    101. Tsotsas, E.: Modelling fluidized bed drying, in T.M. Eikevik, O. Alves-Filho, I. Strommen (eds), Proceedings of the 3rd Nordic Drying Conference (NDC ´05), Karlstad/Schweden, 2005
    102. Metzger, T., Irawan, A., Tsotsas, E.: Discrete modelling of drying kinetics of porous media, in T.M. Eikevik, O. Alves-Filho, I. Strommen (eds), Proceedings of the 3rd Nordic Drying Conference (NDC ´05), Karlstad/Schweden, 2005
    103. Drechsler, J., Peglow, M., Mörl, L., Stakic, M., Tsotsas, E.: Simulation of the steady state behaviour of granulation, agglomeration and drying units in a flow sheet simulation program, in T.M. Eikevik, O. Alves-Filho, I. Strommen (eds), Proceedings of the 3rd Nordic Drying Conference (NDC ´05), Karlstad/Schweden, 2005
    104. Irawan, A., Metzger, T., Tsotsas, E.: Pore network modelling of drying: Combination with a boundary layer model to capture the first drying period, Proceedings of the 7th World Congress of Chemical Engineering, Glasgow/Scotland, 2005, P42-033
    105. Metzger, T., Klotchov, A., Vergeldt, F., van As, H., Tsotsas, E.: Magnetic resonance imaging to monitor moisture profiles in a drying nano-porous sphere, Proceedings of the 7th World Congress of Chemical Engineering, Glasgow/Scotland, 2005, C14-004
    106. Saage, G., Kwapinska, M., Tsotsas, E.: An analysis of mixing in rotary drums by means of discrete element method and penetration model, in R. Garcia-Rajo, H.J. Herrmann, S. McNamara (eds), Proceedings of the 5th International Conference on the Micromechanics of Granular Media (“Powders and Grains”), Stuttgart/Germany, A.A. Balkema Publisher, Leiden 2005, Vol. B, 837-840
    107. Metzger, T., Kwapinska, M., Kwapinski, W., Peglow, M., Saage, G., Tsotsas, E.: New modelling and measuring methods in drying science and technology, in S.J. Kowalski (ed.), Proceedings of the XI Polish Drying Symposium, Poznan/Polen, 2005
    108. Kwapinski, W., Tsotsas, E.: Characterization of particulate materials in respect to drying, desorption or adsorption in packed bed, in S.J. Kowalski (ed.), Proceedings of the XI Polish Drying Symposium, Poznan/Polen, 2005
    109. Kwapinska, M., Saage, G., Tsotsas, E.: On the way from penetration models to discrete element simulations of contact dryers, in S.J. Kowalski (ed.), Proceedings of the XI Polish Drying Symposium, Poznan/Polen, 2005
    110. Post, S., Urukova, I., Tsotsas, E.: Interfacial convection during evaporation of binary mixtures from porous obstacles, AIChE J., 51 (2005), 3257-3274
    111. Kwapinska, M., Saage, G., Tsotsas, E.: Mixing of particles in rotary drums: A comparison of discrete element simulations with experimental results and penetration models for thermal processes, Powder Technol., 161 (2006), 69-78
    112. Schlünder, E.-U., Hampel, R., Peglow, M.: Vakuum-Schockgefriertrocknung und Trocknung wasserhaltiger poröser Partikel, Chem.-Ing.-Tech., 77 (2005), 1892-1899
    113. Metzger, T., Irawan, A., Tsotsas, E.: Remarks on the paper “Extension of Hoshen-Kopelman algorithm to non-lattice environments” by A. Al-Futaisi and T.W. Patzek, Physica A 321 (2003) 665-678, Physica A, 363 (2006), 558-560
    114. Peglow, M., Kumar, J., Warnecke, G., Heinrich, S., Tsotsas, E., Mörl, L., Hounslow, M.J.: An improved discretized tracer mass distribution of Hounslow et al., AIChE J., 52 (2006), 1326-1332
    115. Radichkov, R., Müller, T., Kienle A., Heinrich, S., Peglow, M., Mörl, L.: A numerical bifurcation analysis of continuous fluidized bed spray granulation with external product classification, Chem. Eng. Process., 45 (2006), 826-837
    116. Heinrich, S., Peglow, M., Mörl, L., Tsotsas, E.: Wirbelschichtforschung an der Universität Magdeburg, Mitteldeutsche Mitteilungen, 2006, Heft 2, 3-5
    117. Kwapinska, M., Saage, G., Peglow, M., Tsotsas, E.: Discrete modelling of contact heating of particles in rotating drum, Proceedings of the 5th World Congress on Particle Technology, 23.-27. April 2006, Orlando, Paper No. 163d
    118. Kettner, C., Peglow, M., Metzger, T., Tsotsas, E.: Distributed product quality by the example of moisture content of granular materials in a continuous fluidized bed dryer, Proceedings of the 5th World Congress on Particle Technology, 23.-27. April 2006, Orlando, Paper No. 163f
    119. Kumar, J., Peglow, M., Warnecke, G., Heinrich, S., Tsotsas, E., Mörl, L.: Numerical solutions of a two-dimensional population balance equation for aggregation, Proceedings of the 5th World Congress on Particle Technology, 23.-27. April 2006, Orlando, Paper No. 155c
    120. Peglow, M., Kumar, J., Heinrich, S., Tsotsas, E., Warnecke, G., Mörl, L.: A novel multi-dimensional population balance model incorporating particle size enlargement and drying behavior for fluidized bed spray granulation, Proceedings of the 5th World Congress on Particle Technology, 23.-27. April 2006, Orlando, Paper No. 70bx
    121. Link, J.M., Godlieb, W., Tripp, P. Deen, N.G., Heinrich, S., Peglow, M., Kumar, J., Kuipers, J.A.M., Schönherr, M., Mörl, L.: Comparison of fibre optical measurements and discrete element simulations for the study of granulation in a spouted fluidized bed, Proceedings of the 5th World Congress on Particle Technology, 23.-27. April 2006, Orlando, Paper No. 260a
    122. Radichkov, R., Müller, T., Kienle, A., Heinrich, S., Peglow, M., Mörl, L.: Numerical bifurcation analysis of the nonlinear dynamics in continuous fluidized bed spray granulation systems, Proceedings of the 5th World Congress on Particle Technology, 23.-27. April 2006, Orlando, Paper No. 240e
    123. Hampel, R., Heinrich, S., Mörl, L., Peglow, M.: Modelling and experimental analysis of superheated steam granulation, Proceedings of the 5th World Congress on Particle Technology, 23.-27. April 2006, Orlando, Paper No. 70au
    124. Hussain, A., Seidel-Morgenstern, A., Tsotsas, E.: Heat and mass transfer in tubular ceramic membranes for membrane reactors, Int. J. Heat Mass Transfer, 49 (2006), 2239–2253
    125. Peglow, M., Heinrich, S., Tsotsas, E.: Towards a complete population balance model for fluidized bed spray granulation: Simultaneous drying and particle formation, Glatt International Times, 22 (2006), 7-13
    126. Salem, K., Kwapinski, W., Tsotsas, E., Mewes, D.: Experimental and theoretical investigation of concentration and temperature profiles in a narrow packed bed adsorber, Chem. Eng. Technol., 29 (2006), 910-915
    127. Kwapinski, W., Tsotsas, E.: Characterization of particulate materials in respect to drying, Drying Technology, 24 (2006), 1083-1092
    128. Tsotsas, E., Kwapinska, M., Saage, G.: Modelling of contact dryers, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. A, 29-43
    129. Surasani, V.K., Metzger, T., Tsotsas, E.: Towards a complete pore network drying model: First steps to include heat transfer, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. A, 125-132
    130. Irawan, A., Metzger, T., Tsotsas, E.: Isothermal drying of pore networks: Influence of friction for different pore structures, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. A, 169-176
    131. Stakic, M., Tsotsas, E., Gai, S., Bauerschäfer, U.: Modelling of microwave aided desorption process within ceramic foams, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. A, 219-226
    132. Peglow, M., Kumar, J., Tsotsas, E., Heinrich, S., Warnecke, G., Mörl, L.: A population balance model for simultaneous drying and agglomeration, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. A, 265-272
    133. Vu, T.H., Metzger, T., Tsotsas, E.: Influence of pore size distribution via effective parameters in a continuous drying model, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. A, 554-560
    134. Kettner, C., Peglow, M., Metzger, T., Tsotsas, E.: Distributed product quality in fluidized bed drying, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. B, 745-750
    135. Suherman, Peglow, M., Tsotsas, E.: Drying kinetics of granular and powdery polymers, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. C, 1867-1874
    136. Link, J.M., Godlieb, W., Deen, N.G., Heinrich, S., Tripp, P., Peglow, M., Kuipers, J.A.M., Schönherr, M., Mörl, L.: Discrete element modeling and fibre optical measurements for fluidized bed spray granulation, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. A, 315-322
    137. Hampel, R., Heinrich, S., Peglow, M., Mörl, L.: Study of superheated steam granulation and drying in fluidized beds, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. B, 649-655
    138. Gai, S., Enke, D., Tsotsas, E.: Selective heating of monolithic foam based catalysts and adsorbents by microwave energy, Proceedings of the 19th International Symposium on Chemical Reaction Engineering (ISCRE 19), 3.-6. September 2006, Potsdam, 645-646
    139. Hamel, C., Tota, A., Wang, H., Tablet, C., Caro, J., Tsotsas, E.: Modelling and simulation of a membrane reactor for the oxidation of methane with simultaneous steam reforming using O2-selective perowskite hollow fibres, Proceedings of the 19th International Symposium on Chemical Reaction Engineering (ISCRE 19), 3.-6. September 2006, Potsdam, 724-725
    140. Tota, A., Hamel, C., Klose, F., Tsotsas, E., Seidel-Morgenstern, A.: Enhancement of intermediate product selectivity in multi-stage reactors – potential and pitfalls, Proceedings of the 19th International Symposium on Chemical Reaction Engineering (ISCRE 19), 3.-6. September 2006, Potsdam, 738-739
    141. Groenewold, H., Tsotsas, E.: Drying in fluidized beds with immersed heating elements, Chem. Engng Sci., 62 (2007), 481-502
    142. Peglow, M., Kumar, J., Heinrich, S., Warnecke, G., Tsotsas, E., Mörl, L., Wolf, B.: A generic population balance model for simultaneous agglomeration and drying in fluidized beds, Chem. Engng Sci., 62 (2007), 513-532
    143. Metzger, T., Kwapinska, M., Peglow, M., Saage, G., Tsotsas, E.: Modern modelling methods in drying, Transport in Porous Media, 66 (2007), 103-120
    144. Nagaiah, C., Warnecke, G., Heinrich, S., Peglow, M.: Numerical simulation of temperature and concentration distributions in fluidized beds with liquid injection, Chem. Engng Sci., 62 (2007), 1567-1590
    145. Metzger, T., Irawan, A., Tsotsas, E.: Isothermal drying of pore networks: Influence of friction for different pore structures, Drying Technology, 25 (2007), 49-57
    146. Caro, J.,  Caspary, K.J. , Hamel, C.,  Hoting, B., Kölsch, P. Langanke, B., Nassauer, K., Schiestel, T. Schmidt, A., Schomäcker, R., Seidel-Morgenstern, A., Tsotsas, E., Voigt, I., Wang, H., Warsitz, R., Werth, S., Wolf, A.: Catalytic membrane reactors for partial oxidation using perovskite hollow fiber membranes and for partial hydrogenation using a catalytic membranecontactor, Ind. Eng. Chem. Res., 46 (2007), 2286-2294
    147. Testu, A., Didierjean, S., Maillet, D., Moyne, C., Metzger, T., Niass, T. : Thermal dispersion for water or air flow through a bed of glass beads, Int. J. Heat and Mass Transfer, 50 (2007), 1469-1484
    148. Brzic, D., Ahchieva, D., Peglow, M., Heinrich, S.: An experiemental study of the partial oxidation of ethane to ethylene in a shallow fluidized bed reactor, J. Serb. Chem. Soc.,72 (2007), 183-192
    149. Caro, J., Caspary, K.J., Hamel, C., Hoting, B., Kölsch, P., Langanke, B., Nassauer, K., Noack, M., Schiestel, T., Schroeder, M., Byun, Y.C., Seidel-Morgenstern, A., Tsotsas, E., Wang, H., Werth, S.: Perowskit-Hohlfasermembranen für die katalytische Partialoxidation von Methan zu Synthesegas, Chem.-Ing.-Tech., 79 (2007), 831-842
    150. Peglow, M., Kumar, J., Hampel, R., Tsotsas, E., Heinrich, S.: Towards a complete population balance model for fluidized-bed spray agglomeration,Drying Technology, 25 (2007), 1321-1329
    151. Tsotsas, E., Kwapinska, M., Saage, G.: Modeling of contact dryers, Drying Technology 25 (2007), 1377-1391
    152. Hampel, R., Peglow, M., Kumar, J., Tsotsas, E., Heinrich, S.: Study of agglomeration kinetics in fluidized beds referring to the moisture content of particles, Proceedings of the 3rd International Conference on Population Balance Modelling (PBM), 18.-21. September 2007, Québec/Kanada
    153. Peglow, M., Cunäus, U., Kettner, C., Metzger, T., Tsotsas, E.: A population balance approach for continuous fluidized bed dryers, Proceedings of the 3rd International Conference on Population Balance Modelling (PBM), 18.-21. September 2007, Québec/Kanada
    154. Avila-Acevedo, J.G., Tsotsas, E.: Transient natural convection in stored granular media, Proceedings of 6th European Congress of Chemical Engineering (ECCE-6), 16.-20. September 2007, Copenhagen, No. 848
    155. Metzger, T., Tsotsas, E.: Viscous stabilization of drying front: three-dimensional pore network simulations, Proceedings of 6th European Congress of Chemical Engineering (ECCE-6), 16.-20. September 2007, Copenhagen, No. 1925
    156. Suherman, Peglow, M., Tsotsas, E.: Drying kinetics of granular Nylon-6, Proceedings of 6th European Congress of Chemical Engineering (ECCE-6), 16.-20. September 2007, Copenhagen, No. 1937
    157. Surasani, V.K., Metzger, T., Tsotsas, E.: A non-isothermal pore network drying model: Influence of gravity, Proceedings of 6th European Congress of Chemical Engineering (ECCE-6), 16.-20. September 2007, Copenhagen, No. 2131
    158. Peglow, M., Cunäus, U., Kettner, C., Metzger, T., Tsotsas, E.: A population balance approach for continuous fluidized bed dryers, Proceedings of 6th European Congress of Chemical Engineering (ECCE-6), 16.-20. September 2007, Copenhagen, No. 2215
    159. Hamel, C., Tóta, A., Klose, F., Tsotsas, E., Seidel-Morgenstern, A.: Experimental and model based analysis of single und multi stage membrane reactors for the oxidation of short-chain hydrocarbons in a pilot scale, Proceedings of 6th European Congress of Chemical Engineering (ECCE-6), 16.-20. September 2007, Copenhagen, No. 3386
    160. Hamel, C., Wang, H., Caro, J., Tsotsas, E., Seidel-Morgenstern, A.: Simulation study of membrane supported oxidation of methane with simultaneous steam reforming using O2-selective Perowskite hollow fibres, Proceedings of 6th European Congress of Chemical Engineering (ECCE-6), 16.-20. September 2007, Copenhagen, No. 3412
    161. Peglow, M., Kettner, C., Metzger, T., Tsotsas, E.: Ein analytisches Populationsbilanzmodell für die kontinuierliche Wirbelschichttrocknung, Transactions of the Tambov Technical University, 13 (2007), 474-489
    162. Kumar, J., Peglow, M., Warnecke, G., Heinrich, S.: An efficient numerical technique for solving population balance equation involving aggregation, breakage, growth and nucleation, Powder Technology, 179 (2007), 205-228
    163. Hampel, R., Heinrich, S., Peglow, M., Mörl, L.: Modellierung und experimentelle Untersuchung der Wirbelschicht-Sprühgranulation im überhitzten Wasserdampf, Chem.-Ing.-Techn., 79 (2007), 82-90
    164. Metzger, T., Irawan, A., Tsotsas, E.: Influence of pore structure on drying kinetics: a pore network study, AIChE J., 53 (2007), 3029-3041
    165. Kwapinska M., Saage, G., Tsotsas, E.: Continuous versus discrete modelling of heat transfer to agitated beds, Powder Technology, 181 (2008), 331-342
    166. Suherman, Peglow, M., Tsotsas, E.: On the applicability of normalization for drying kinetics, Drying Technology, 26 (2008), 90-96
    167. Avila-Acevedo, J. G., Tsotsas, E.: Transient natural convection and heat transfer during the storage of granular media, Int. J. Heat Mass Transfer, 51 (2008), 3468-3477
    168. Hamel, C., Tota, A., Klose, F., Tsotsas, E., Seidel-Morgenstern, A.: Analysis of single and multi-stage membrane reactors for the oxidation of short-chain alkanes – Simulation study and pilot scale experiments, Chem. Eng. Res. Des., 86 (2008), 753-764
    169. Metzger, T., Tsotsas, E.: Pore network models for drying, Proceedings of 3rd International Scientific-Technical Conference on Energy-Saving Technologies for Drying and Hygro-Thermal Processing (DHTP), 16.-18. September 2008, Moskau, Vol. 1, 56-62
    170. Surasani, V., Metzger, T., Tsotsas, E.: Influence of heating mode on drying behavior of capillary porous media: pore scale modelling, Chemical Engineering Science, 63 (2008), 5218-5228
    171. Surasani, V., Metzger, T., Tsotsas, E.: Consideration of heat transfer in pore network modelling of convective drying, International Journal of Heat and Mass Transfer, 51 (2008), 2506-2518
    172. Metzger, T., Tsotsas, E.: Viscous stabilization of drying front: three-dimensional pore network simulations, Chemical Engineering Research and Design, 86 (2008), 739-744
    173. Metzger, T., Vorhauer, N., Tsotsas, E.: Use of pore networks for macroscopic modelling of drying, Proceedings of the 16th International Drying Symposium, 9.-12. November 2008, Hyderabad, Vol. A, 242-249
    174. Surasani, V.K., Metzger, T., Tsotsas, E.: Drying simulations of various 3D pore structures by a non-isothermal pore network model, Proceedings of the 16th International Drying Symposium, 9.-12. November 2008, Hyderabad, Vol. A, 356-364
    175. Kharaghani, R., Metzger, T., Tsotsas, E.: Mechanical effects during isothermal drying: A new discrete modelling approach, Proceedings of the 16th International Drying Symposium, 9.-12. November 2008, Hyderabad, Vol. A, 440-448
    176. Cunäus, U., Peglow, M., Tsotsas, E., Metzger, T.: Modelling of continuous fluidized bed drying using a population balance approach, Proceedings of the 16th International Drying Symposium, 9.-12. November 2008, Hyderabad, Vol. A, 456-462
    177. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Monte-Carlo simulation of agglomerate growth in fluidized bed spray drying, Proceedings of the 16th International Drying Symposium, 9.-12. November 2008, Hyderabad, Vol. A, 493-500
    178. Hampel, R., Peglow, M., Tsotsas, E., Heinrich, S.: Study of fluidized bed spray agglomeration focussing the moisture content of the solid, Proceedings of the 16th International Drying Symposium, 9.-12. November 2008, Hyderabad, Vol. B, 1052-1059
    179. Edreva, V., Zhang, F., Mangold, M., Tsotsas, E.: Mass transport in multilayer porous metallic membranes -- diagnosis, identification and validation, Chem. Eng. Technol., 32 (2009), 632-640
    180. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Stochastic simulation of agglomerate formation in fluidized bed spray drying: A micro-scale approach, Chemical Engineering Science, 64 (2009), 2631-2643
    181. Peglow, M., Tsotsas, E.: Discrete and continuous models to describe the kinetics of particle formation in fluidized beds, Proceedings of the 4th Nordic Drying Conference (NDC'09), Reykjavik/Island, 18.--19. Juni 2009
    182. Cunäus, U., Peglow, M., Tsotsas, E., Metzger, T.: Modeling of continuous fluidized bed drying using a population balances approach, Proceedings of the 4th Nordic Drying Conference (NDC'09), Reykjavik/Island, 18.--19. Juni 2009
    183. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Modelling of agglomerate grwoth in fluidized bed spray drying, Proceedings of the 9th International Symposium on Agglomeration and 4th International Granulation Workshop, 24.--06. Juni 2009, Sheffield/UK
    184. Sommer, A., Heinrich, S., Antonyuk, S., Peglow, M., Tsotsas, E.: Influence of process parameters on particle properties during fluidized bed granulation, Proceedings of the 9th International Symposium on Agglomeration and 4th International Granulation Workshop, 24.--06. Juni 2009, Sheffield/UK
    185. Weigler, F., Hoffmann, T., Naumann, M., Peglow, M., Tsotsas, E.: Experimental investigation of temperature distributions in bulk materials, Proceedings of the 7th World Conference on Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics (ExHFT-7), Krakow/Polen, 28. Juni -- 3. Juli 2009, 2034-2046
    186. Iroba, K.L., Weigler, F., Mellmann, J., Metzger, T., Tsotsas, E.: Particle velocity profiles and residence time distribution in mixed-flow grain dryers, Proceedings of 6th International Conference for Conveying and Handling of Particulate Solids (CHoPS) and 10th International Conference on Bulk Materials Storage, Handling & Transportation (ICBMH) 3.--7. August 2009, Brisbane, Queensland/Australia, 79-84
    187. Kharagani, A., Metzger, T., Tsotsas, E.: Pore-scale modeling of drying-induced cracks, Proceedings of the 8th World Congress of Chemical Engineering (WCCE), 23.--27. August 2009, Montreal/Canada
    188. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Modeling of particle growth in fluidized bed spray agglomeration, Proceedings of the 8th World Congress of Chemical Engineering (WCCE), 23.--27. August 2009, Montreal/Canada
    189. Cunäus, U., Peglow, M., Tsotsas, E, Metzger, T.: Modeling of continuous fluidized bed drying using a population balance approach, Proceedings of the 8th World Congress of Chemical Engineering (WCCE), 23.--27. August 2009, Montreal/Canada
    190. Tsotsas, E.: Particle formulation by drying, Proceedings of the 8th World Congress of Chemical Engineering (WCCE), 23.--27. August 2009, Montreal/Canada
    191. Dernedde, M., Hampel, R., Peglow, M., Tsotsas, E.: Determination of agglomeration kinetics in fluidized beds, Proceedings of the 8th World Congress of Chemical Engineering (WCCE), 23.--27. August 2009, Montreal/Canada
    192. Tsotsas, E., Metzger, T., Peglow, M.: Models and tools for product engineering by drying, Proceedings of the 12th Polish Drying Symposium, 14.--16. September 2009, Lodz/Polen, 88-104
    193. Kirsch, C., Metzger, T., Tsotsas, E.: Towards a micro-scale simulation of convective gel drying, Proceedings of the 12th Polish Drying Symposium, 14.--16. September 2009, Lodz/Polen, 223-234
    194. Hussain, A., Seidel-Morgenstern, A., Tsotsas, E.: Influence of volumetric flow rate and temperature on mass transfer in composite ceramic membranes for membrane reactors, Canadian Journal of Pure & Applied Sciences, 3 (2009), 741-749
    195. Hussain, A., Seidel-Morgenstern, A., Tsotsas, E.: Effect of top layer´s material and flow direction on mass transfer through multi-layer ceramic membranes, Canadian Journal of Pure & Applied Sciences, 3 (2009), 993-1000
    196. Hussain, A., Seidel-Morgenstern, A., Tsotsas, E.: Influence of the multilayer nature of a composite membrane on mass transfer,
      Journal of Porous Media, 12 (2009), 749-757
    197. Hussain, A., Seidel-Morgenstern, A., Tsotsas, E.: General analysis of isobaric diffusion in composite ceramic membranes with inclusion of axial dispersion coefficient, Journal of Porous Media, 12 (2009), 955-966
    198. Surasani, V.K., Metzger, T., Tsotsas, E.: A non-isothermal pore network drying model with gravity effect, Transp. Porous Med., 80 (2009), 431-439
    199. Mangold, M., Bück, A., Hanke-Rauschenbach, R.: Passivity based control of a distributed PEM fuel cell model, Journal of Process Control, 20 (2010), 292-313
    200. Martin, P., Hamel, C., Ordóňez, S., Diez, F.V., Tsotsas, E., Seidel-Morgenstern, A.: Analysis of a fluidized bed membrane reactor for butane partial oxidation to maleic anhydride: 2D modeling, Chemical Engineering Science, 65 (2010), 3538-3548
    201. Mellmann, J., Iroba, K.L., Metzger, T., Tsotsas, E.: DEM-modelling of solids transport in mixed-flow dryers, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
    202. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Stochastic modelling of fluidized bed spray drying: Effect of particle porosity and bed temperature on agglomeration kinetics, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
    203. Börner, M., Peglow, M., van Buijtenen, M.S., Deen,m N.G., Tsotsas, E., Kuipers, J.A.M., Heinrich, S.: Residence times in fluidized bed granulation, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
    204. Fischer, C., Bück, A., Peglow, M., Tsotsas, E.: Fiber-optical inline measurement of particle size distributions in fluidized bed processes, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
    205. Dernedde, M., Bück, A., Peglow, M., Tsotsas, E.: Description of particle formation in fluized beds with a stochastic modelling method,
      Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
    206. Peglow, M., Tsotsas, E.: Kinetics of particle formation in fluidized beds: Modeling approaches and experimental methods, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
    207. Cunäus, U., Tsotsas, E., Peglow, M., Metzger, T.: Modelling of fluidized bed drying using population balance equations, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
    208. Hoffmann, T., Peglow, M., Tsotsas, E.: Dynamic behaviour of particle-size distribution in fluidized bed granulation, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
    209. Bück, A., Peglow, M., Tsotsas, E., Kienle, A.: Model-based measurement of PSDs in granulation processes, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
    210. Surasani, V., Metzger, T., Tsotsas, E.: Drying simulations of various 3D pore structures by a nonisothermal pore network model, Drying Technology 28 (2010), 615-623
    211. Metzger, T., Tsotsas, E.: Network models for capillary porous media: application to drying technology, Chem.-Ing.-Tech., 82 (2010), 869-879
    212. Avila-Acevedo, J.G., Tsotsas, E.: Moisture migration in stored granular materials, Proceedings of “Porous media and its applications in science, engineering, and industry”, 3rd International Conference, 20.-25. Juni 2010, Montecatini/Italy, 313-318
    213. Vorhauer, N., Metzger, T., Tsotsas, E.: Drying of porous media: A comparison of discrete and continuous models, Proceedings (CD-ROM) of “Porous media and its applications in science, engineering, and industry”, 3rd International Conference, 20.-25. Juni 2010, Montecatini/Italy
    214. Kharaghani, A., Metzger, T., Tsotsas, E.: Pore network modeling of mechanical effects during drying, Proceedings (CD-ROM) of “Porous media and its applications in science, engineering, and industry”, 3rd International Conference, 20.-25. Juni 2010, Montecatini/Italy
    215. Kirsch, C., Metzger, T., Tsotsas, E.: Modeling and simulation of convective drying of gels, Proceedings (CD-ROM) of “Porous media and its applications in science, engineering, and industry”, 3rd International Conference, 20.-25. Juni 2010, Montecatini/Italy
    216. Weigler, F., Peglow, M., Tsotsas, E.: Discrete investigation of thermal relaxation in packed beds, Proceedings (CD-ROM) of 14th International Heat Transfer Conference (IHTC14), 08.-13. August 2010, Washington/USA
    217. Bück, A., Peglow, M., Tsotsas, E., Mangold, M., Kienle, A.: Model-based measurement and control of particulate processes: an application to granulation processes, Proceedings (CD-ROM) of 19th International Congress of Chemical and Process Engineering (CHISA2010) and 7th European Congress of Chemical Engineering (ECCE-7), 28. August - 1. September 2010, Prag/Czech Republic
    218. Vorhauer, N., Metzger, T., Tsotsas, E.: Empirical macroscopic model for drying of porous media based on pore networks and scaling theory, Drying Technology, 28 (2010), 991-1000
    219. Kwapinski, W., Salem, K., Mewes, D., Tsotsas, E.: Thermal and flow effects during adsorption in conventional, diluted and annular packed beds, Chem. Eng. Sci., 68 (2010), 4250-4260
    220. Bück, A., Peglow, M., Naumann, M., Tsotsas, E.: Mathematical modelling and simulation of drying of a droplet with suspended particles, Proceedings of the 4th International Conference on Population Balance Modelling, 15.-17. September 2010, Berlin, 99-110
    221. Dernedde, M., Peglow, M., Tsotsas, E.: Probabilistic modeling of particle formation in fluidized bed spray granulation, Proceedings of the 4th International Conference on Population Balance Modelling, 15.-17. September 2010, Berlin, 99-110
    222. Kharaghani, A., Metzger, T., Tsotsas, E.: An irregular pore network model for convective drying of aggregates capillary and micro-mechanical effects, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 132-140
    223. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Experimental and theoretical investigation of drying effects on fluidized bed wet agglomeration, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 318-324
    224. Weigler, F., Peglow, M., Tsotsas, E.: Advances in discrete modeling of heat transfer in contact drying equipment, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 325-330
    225. Kirsch, C., Metzger, T., Tsotsas, E.: Micro-scale model for drying of highly porous particle aggregates, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 407-414
    226. Vorhauer, N., Metzger, T., Tsotsas, E.: Extraction of effective parameters for continuous drying model from discrete pore network model, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 415-422
    227. Cunäus, U., Peglow, M., Tsotsas, E.: Application of population balance equations for continuous fluidized bed drying, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 499-505
    228. Bück, A., Peglow, M., Tsotsas, E., Mangold, M., Kienle, A.: Model-based measurement and control of granulation processes, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 659-665
    229. Hoffmann, T., Peglow, M., Tsotsas, E.: Investigation of process dynamics in fluidized bed granulation, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 666-671
    230. Fischer, C., Bück, A., Peglow, M., Tsotsas, E.: Fibre-optical inline measurements of particle size distributions in fluidized bed processes, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 672-679
    231. Dernedde, M., Peglow, M., Tsotsas, E: Stochastic modeling of fluidized bed granulation, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 1120-1127
    232. Börner, M., Peglow, M., Tsotsas, E.: Particle residence times in fluidized bed granulation, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 1128-1134
    233. Naumann, M., Tsotsas, E., Peglow, M., Bück, A., Marchisio, D. L.: Modeling of particle formation from a single droplet containing micro or nano particles, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 1172-1177
    234. Mellmann, J., Iroba, K. L., Möller, B., Metzger, T., Tsotsas, E.: Moisture content and residence time distributions in mixed-flow grain dryers, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 1995-2002
    235. Hoffmann, T., Hailu, B. A., Peglow, M., Tsotsas, E., Jacob, M.: Particle-gas mass transfer in a spouted bed with adjustable air inlet,
      Drying Technol., 29 (2011), 257-265
    236. Iroba, K.L., Mellmann, J., Weigler, F., Metzger, T., Tsotsas, E.: Particle velocity profiles and residence time distribution in mixed-flow grain dryers, Granular Matter, 13 (2011), 159-168
    237. Bück, A., Peglow, M., Tsotsas, E., Mangold, M., Kienle, A.: Model-based measurement of particle size distributions in layering granulation processes, AIChE J., 57 (2011), 929-941
    238. Dernedde, M., Peglow, M., Tsotsas, E.: Stochastische Modellierung der Partikelbildung in Wirbelschichten, Chem.-Ing.-Tech., 83 (2011), 665-671
    239. Hoffmann, T., Peglow, M., Tsotsas, E.: Prozessdynamik der Wirbelschichtgranulierung, Chem.-Ing.-Tech., 83 (2011), 658-664
    240. Peglow, M., Cunäus, U., Tsotsas, E.: An analytical solution population balance equations for continuous fluidized bed drying, Chem. Eng. Sci., 66 (2011), 1916-1922
    241. Börner, M., Peglow, M., Tsotsas, E.: Particle residence times in fluidized bed granulation equipments, Chem. Eng. Technol., 34 (2011), 1116-1122
    242. Dernedde, M., Peglow, M., Tsotsas, E.: Stochastic modelling of fluidized bed granulation: Influence of droplet pre-drying, Chem. Eng. Technol.; 34 (2011), 1172-1176
    243. Tsotsas, E.: Food drying as a challenge between process efficiency and product quality, Proceedings of the 11th International Congress on Engineering and Food (ICEF11), 22.-26. Mai 2011, Athens/Greece, Paper No. FPD1204
    244. Chávez-Montes, E., Peglow, M., Hampel, R., Mariano, J., Filliol, C., Gumy, J.-C.: An eye from industry on recent advances in fluid bed agglomeration of beverage powders, Proceedings of the 11th International Congress on Engineering and Food (ICEF11), 22.-26. Mai 2011, Athens/Greece, Paper No. FPE298
    245. Kharaghani, R., Metzger, T., Tsotsas, E.: A proposal for discrete modeling of mechanical effects during drying, combining pore networks with DEM, AIChE J., 57 (2011), 872-885
    246. Bück, A., Peglow, M., Tsotsas, E.: Model-based measurement and control of fluidised bed layering granulation processes, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 28
    247. Ivanova, N., Bück, A., Peglow, M., Tsotsas, E.: Continuous pellet coating for the pharmaceutical industry, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 33
    248. Wassermann, M., Weinholz, S., Ivanova, N., Cordes, C., Peglow, M., Pergande, W.: Granulation of lactic acid bacteria using fluidized bed technology, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 64
    249. Dernedde, M., Peglow, M., Tsotsas, E.: Simulation of fluidized bed spray agglomeration focussing on the pre-drying of droplets, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 79
    250. Hoffmann, T., Bachmann, P., Peglow, M., Tsotsas, E.: Investigation of growth kinetics in fluidised bed spray granulation, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 80
    251. Börner, M., Peglow, M., Tsotsas, E.: Application of experimental parameters in an extended PBM of a Wurster fluidized bed granulation, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 81
    252. Naumann, M., Peglow, M., Bück, A., Marchisio, D., Tsotsas, E.: Modeling of particle formation from a single nano suspension droplet, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 84
    253. Cháves-Montes, E., Peglow, M., Hampel, R., Mariano, J., Filliol, C., Gumy, J.-C.: Recent advances in fluid bed agglomeration of beverage powders, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 114
    254. Fischer, C., Peglow, M., Tsotsas, E.: Simulation of in-line particle sizing techniques during agglomeration processes, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 116
    255. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Kinetics of fluidized bed spray agglomeration for compact and porous particles, Chem. Eng. Sci., 66 (2011), 1866-1878
    256. Peglow, M., Dernedde, M., Tsotsas, E.: Stochastic simulation of fluidized bed agglomeration, Proceedings of the 5th Nordic Drying Conference, 19.-21. Juni 2011, Helsinki/Finnland
    257. Iroba, K.L., Weigler, F., Mellmann, J., Metzger, T., Tsotsas, E.: Residence time distribution in mixed-flow grain dryers, Drying Technol., 29 (2011), 1252-1266
    258. Fischer, C., Peglow, M., Tsotsas, E.: Restoration of particle size distribution from fiber-optical in-line measurements in fluidized bed processes, Chem. Eng. Sci., 66 (2011), 2842-2852
    259. Wang, Y., Kharaghani, A., Metzger, T., Tsotsas, E.: Pore network drying model for particle aggregates: Assessment by x-ray microtomography, Proceedings of the 7th Asia-Pacific Drying Conference (ADC2011), 18.-20. September, Tianjin/China
    260. Kharaghani, A., Wang, Y., Kirsch, C., Metzger, T., Tsotsas, E.: Drying of highly porous particle aggregates: Pore-scale simulation and x-ray microtomography, Proceedings of the 7th Asia-Pacific Drying Conference (ADC2011), 18.-20. September, Tianjin/China
    261. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Investigation of the kinetics of fluidized bed spray agglomeration based on stochastic methods, AIChE J., 57 (2011), 3012-3026
    262. Kharaghani, A., Kirsch, C., Metzger, T., Tsotsas, E.: Three-dimensional micro-scale model for convective gel drying,
      Proceedings of the 11th AIChE Annual Meeting, 16.-21. Oktober 2011, Minneapolis/USA
    263. Vorhauer, N., Metzger, T., Tsotsas, E.: On the influence of temperature gradients on drying of pore networks, Proceedings of the 3rd European Drying Conference (EuroDrying 2011), 26.-28. Oktober 2011, Palma de Mallorca/Spanien
    264. Tsotsas, E.: On the combination of particle formation and drying kinetics, Proceedings of the 3rd European Drying Conference (EuroDrying 2011), 26.-28. Oktober 2011, Palma de Mallorca/Spanien
    265. Wang, Y., Kharaghani, A., Metzger, T., Tsotsas, E.: Visualization of liquid in drying particle aggregates by x-ray microtomography and use of pore-scale modelling, Proceedings of the 3rd European Drying Conference (EuroDrying 2011), 26.-28. Oktober 2011, Palma de Mallorca/Spanien
    266. Surasani, V.K., Kretschmer, F., Heidecke, P., Peglow, M., Tsotsas, E.: Biomass combustion in a fluidized-bed system: An integrated model for dynamic plant simulations, Ind. Eng. Chem. Res., 50 (2011), 9936-9943
    267. Mellmann, J., Iroba, K.L., Metzger, T., Tsotsas, E., Farkas, I.: Moisture content and residence time distributions in mixed-flow grain dryers, Biosystems Engng., 109 (2011), 297-307
    268. Kharaghani, A., Metzger, T., Tsotsas, E.: An irregular pore network model for convective drying and resulting damage of particle aggregates, Chem. Eng. Sci., 75 (2012), 267-278
    269. Vorhauer, N., Metzger, T., Tsotsas, E., Prat, M.: Experimental investigation of drying by pore networks: Influence of pore size distribution and temperature, Proceedings of the 4th International Conference on Porous Media and its Applications in Science and Engineering ICPM4, 17.-22. Juni 2012, Potsdam
    270. Sun, Y., Kharaghani A., Metzger, T., Tsotsas, E., Müller, J..: Investigation of lotion distribution in wet wipes by pore network model and micro computed tomography, Proceedings of the 4th International Conference on Porous Media and its Applications in Science and Engineering ICPM4, 17.-22. Juni 2012, Potsdam
    271. Bück, A.,  Klaunick, G., Kumar, J., Peglow, M., Tsotsas, E.: Numerical simulation of particulate processes for control and estimation by spectral methods, AIChE J., 58 (2012), 2309-2319
    272. Palis, S., Bück, A., Kienle, A.: Low order controller design for continuous fluidized bed spray granulation with internal product classification by robust control methods, Proceedings of the 7th IFAC Symposium on Robust Control Design, 20.-22. Juni 2012, Aalborg/Denmark
    273. Tsotsas, E.: Influence of drying kinetics on particle formation: A personal perspective, Drying Technol., 30 (2012), 1167-1175
    274. Prat, M.,  Veran-Tissoires, S., Vorhauer, N., Metzger, T., Tsotsas, E.: Fractal phase distribution and drying: Impact on two-phase zone scaling and drying time scale dependence, Drying Technol., 30 (2012), 1129-1135
    275. Tsotsas, E., Pakowski, Z., Kudra, T., Devahastin, S.: Guest editorial: Special issue to commemorate 30 years of Drying Technology, Drying Technol., 30 (2012), 1125-1126
    276. Dadkhah, M., Peglow, M., Tsotsas, E.: Characterization of the internal morphology of agglomerates produced in a spray fluidized bed by X-ray tomography, Powder Technol., 228 (2012), 349-358
    277. Narni, N.R., Warnecke, G., Kumar, J., Peglow, M., Heinrich, S.: Some modelling aspects of aggregation kernels and the Aggregation Population Balance Equations, Proceedings of the International Conference on Eco-friendly Computing and Communication Systems (ICECCS), 9.-11. August 2012, Cochin, Kerala/Indien, 319-326
    278. Dadkhah, M., Peglow, M., Tsotsas, E.: Morphological characterization of spray fluidized bed agglomerates by using X-ray m-computed tomography, Proceedings of the International Conference on Mechanics of Nano, Micro and Macro composite structures, 18.-20. Juni 2012, Torino/Italy
    279. Mezhericher, M., Naumann, M., Peglow, M., Levy, A., Tsotsas, E., Borde, I.: Continuous species transport and population balance models for first drying stage of nanosuspension droplets, Chem. Eng. J., 210 (2012), 120-135
    280. Wang, Y., Kharaghani, A., Metzger, T., Tsotsas, E.: Pore network drying model for particle aggregates: Assessment by X-ray microtomography, Drying Technol., 30 (2012), 1800-1809
    281. Hoffmann, T., Peglow, M., Tsotsas, E.: Influence of process parameters on the particle surface structure in fluidized bed spray granulation, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
    282. Hampel, N., Bück, A., Peglow, M., Tsotsas, E.: Continuous pellet coating in a Wurster fluidized bed process, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
    283. Kharaghani, A., Kirsch, C., Tsotsas, E.: Influence of wetting properties on drying behavior of highly porous particle aggregates, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
    284. Sun, Y., Kharaghani, A., Tsotsas, E.: Modeling droplet evolution on a porous particle as micro-scale process in fluidized bed spray drying, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
    285. Wang, Y., Kharaghani, A., Tsotsas, E.: Pore-scale comparison of liquid distributions between pore network drying simulations and X-ray tomography, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
    286. Dadkhah, M., Peglow, M., Tsotsas, E.: Morphological characterization of fluidized bed spray drying agglomerates by X-ray tomography, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
    287. Dernedde, M., Peglow, M., Tsotsas, E.: Stochastic modeling of fluid bed agglomeration: Determination of particle moisture content, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
    288. Hussain, M., Peglow, M., Tsotsas, E.: Modeling the effect of process parameters in aggregation kernel of PBE using Monte-Carlo simulations, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
    289. Kharaghani, A., Anyamene, D., Tsotsas, E.: Direct imaging of convective drying process for single and dual cells of two-dimensional particle packings, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
    290. Bachmann, P., Peglow, M., Tsotsas, E.: Population balance modelling of moisture content distributions in semi-batch fluidized bed drying, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
    291. Dernedde, M., Peglow, E. Tsotsas, E.: A novel, structure-tracking monte carlo algorithm for spray fluidized bed agglomeration, AIChE J., 58 (2012), 3016-3029
    292. Bück, A., Peglow, M., Naumann, M., Tsotsas, E.: Population balance model for drying of droplets containing aggregating nanoparticles, AIChE J., 58 (2012), 3318-3328
    293. Hampel, N., Bück, A., Peglow, M., Tsotsas, E.: Continuous pellet coating in a Wurster fluidized bed process, Chem. Eng. Sci., 86 (2013), 87-98
    294. Kharaghani, A., Kirsch, C., Metzger, T., Tsotsas, E.: Micro-scale fluid model for drying of highly porous particle aggregates, Comp. Chem. Eng., 52 (2013), 46-54
    295. Börner, M., Peglow, M., Tsotsas, E.: Atomization characteristic into a top-spray fluidised bed obtained by an experimental and DEM-CFD approach, Proceedings of the International Congress on Particle Technology, PARTEC, 23.-25. April 2013, Nürnberg
    296. Dernedde, M., Peglow, M., Tsotsas, E.: Stochastic modelling of fluidised bed spray agglomeration focussing on the structure of particles, Proceedings of the International Congress on Particle Technology, PARTEC, 23.- 25. April 2013, Nürnberg
    297. Hoffmann, T., Peglow, M., Tsotsas, E.: Particle formation in fluidized bed spray granulation, Proceedings of the International Congress on Particle Technology, PARTEC, 23.-25. April 2013, Nürnberg
    298. Bück, A., Peglow, M., Tsotsas, E.: Control of particle properties in fluidised bed granulation processes, Proceedings of the International Congress on Particle Technology, PARTEC, 23.-25. April 2013, Nürnberg
    299. Kretschmer, F., Lemin, B., Bück, A., Peglow, M., Tsotsas, E.: Kinetic analysis of biomass combustion in fluidized beds, Proceedings of the International Congress on Particle Technology, PARTEC, 23.-25. April 2013, Nürnberg
    300. Kharaghani, A., Kirsch, C., Tsotsas, E.: Discrete three-dimensional model for drying particle aggregates, Proceedings of the International Congress on Particle Technology, PARTEC, 23.-25. April 2013, Nürnberg
    301. Vorhauer, N., Tran, Q. T., Metzger, T., Tsotsas, E., Prat, M.: Experimental investigation of drying in a model porous medium: Influence of thermal gradients, Drying Technol., 31 (2013), 920-929
    302. Börner, M., Peglow, M., Tsotsas, E.: Derivation of  parameters for a two compartment population balance model of Wurster fluidised bed granulation, Powder Technol., 238 (2013), 122-131
    303. Hussain, M., Kumar, J., Peglow, M., Tsotsas, E.: Simulating the spray fluidized bed granulation by modelling the aggregation efficiency, Proceedings of the 6th International Granulation Conference, 26.-28. Juni 2013, Sheffield/UK
    304. Bück, A., Palis, S., Tsotsas, E.: Based control of particle properties in fluidised bed spray granulation, Proceedings of the 6th International Granulation Conference, 26.-28. Juni 2013, Sheffield/UK
    305. Dadkhah, M., Peglow, M., Tsotsas, E.: Influence of process variables on particle morphology in spray fluidized bed agglomeration, Proceedings of the 6th International Granulation Conference, 26.-28. Juni 2013, Sheffield/UK
    306. Börner, M., Tsotsas, E.: Spray zone demarcation in top-spray fluidised bed granulation by droplet detection methods, Proceedings of the 6th International Granulation Conference, 26.-28. Juni 2013, Sheffield/UK
    307. Hussain, M., Kumar, J., Peglow, M., Tsotsas, E.: Modeling spray fluidized bed aggregation kinetics on the basis of Monte-Carlo simulation results, Chem. Eng. Sci., 101 (2013), 35-45
    308. Nagaiah, C., Kumar, N.S., Bück, A., Warnecke, G.: Parallel and high resolution numerical solution of concentration and temperature distribution in fluidized beds, Comp. Chem. Eng., 52 (2013), 122-133
    309. Hussain, M., Kumar, J., Peglow, M., Tsotsas, E.: Population balance modeling of  influencing parameters in spray fluidized bed granulation, Proceedings of the 5th International Conference on Population Balance Modeling, 11.-13. September 2013, Bangalore/Indien
    310. Bück, A., Hampel, N., Peglow, M., Tsotsas, E.:  Product control in pharmaceutical coating by population balance  modelling, Proceedings of the 5th International Conference on Population Balance Modeling, 11.-13. September 2013, Bangalore/Indien
    311. Wang, Y.J., Kharaghani, A., Tsotsas, E.: Pore-scale visualization and simulation of liquid films for drying particle packing, Proceedings of EuroDrying 2013, 02.-04. Oktober 2013, Paris/Frankreich
    312. Scaar, H., Franke, G., Weigler, F., Delele, M., Tsotsas, E., Mellmann, J.: Experimental study of the airflow distribution during mixed-flow grain drying, Proceedings of EuroDrying 2013, 02.-04. Oktober 2013, Paris/Frankreich
    313. Gadiel, C., Meininghaus, R., Quoll, M., Tsotsas, E.: Emissionen von Automobillackieranlagen – Ökobilanzielle Betrachtung der thermischen Nachverbrennung im Unterbodenschutz, Chem.-Ing.-Techn., 85 (2013), 1632-1637
    314. Dernedde, M., Peglow, M., Tsotsas, E: Stochastic modeling of fluidized bed agglomeration: Determination of particle moisture content,
      Drying Technol., 31 (2013), 1764-1771
    315. Hussain, M., Kumar, J., Peglow, M., Tsotsas, E.: On two-compartment population balance modelling of spray fluidized bed agglomeration, Computers and Chemical Engineering, 61 (2014), 185-202
    316. Bück, A., Tsotsas, E.: Modellbasierte Regelung der Partikelgrößenverteilung in der kontinuierlichen Wirbelschicht-Sprühgranulation,
      Chem.-Ing.-Techn., 86 (2014), 725-733
    317. Hagemeier, T., Glöckner, H., Roloff, C., Thévenin, D., Tomas, J.: Simulation of multi-stage particle classification in a zig-zag apparatus,
      Chem. Eng. Technol., 37 (2014), 879-887
    318. Hussain, M., Peglow, M., Tsotsas, E., Kumar, J.: Modeling of aggregation kernel using Monte Carlo simulations of spray fluidized bed agglomeration, AIChE J., 60 (2014), 855-868
    319. Dadkhah, M., Tsotsas, E.: Influence of process variables on internal particle structure in spray fluidized bed agglomeration,  Powder Technol., 258 (2014), 165-173
    320. Meyer, K., Bück, A., Tsotsas, E.: Dynamic modelling of particle formulation in horizontal fluidized beds, Proceedings of the 24th  European Symposium on Computer Aided Process Engineering, ESCAPE 24, 15.-18. Juni 2014, Budapest/Ungarn
    321. Narni, N.R., Peglow, M., Warnecke, G., Kumar, J., Heinrich, S., Kuipers, J.A.M.: Modeling of aggregation kernels for fluidized beds using discrete particle model simulations, Particuology 13 (2014), 134-144
    322. Tsotsas, E.: Multi-scale approaches to processes that combine drying with particle formation, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
    323. Wang, Y., Mahmood, H.T., Kharaghani, A., Tsotsas, E.: Visualization and modeling of liquid film rings observed during drying of particle packings, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
    324. Scaar, H., Weigler, F., Delele, M., Franke, G., Mellmann, J., Tsotsas, E.: Numerical modeling of mixed flow grain drying with CFD and DEM, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
    325. Rahimi, A., Kharaghani, A., Metzger, T., Tsotsas, E.: Pore network simulations to determine the influence of pore structure on wetting-drying kinetics of porous particles, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
    326. Vorhauer, N., Tsotsas, E., Prat, M.: Isothermal drying in the presence of capillary liquid films: Comparison of experiments with pore network simulations in a model system, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
    327. Tran, T.T.H., Terrazas-Velarde, K., Avila-Acevedo, J., Tsotsas, E.: Particle morphology as a means for investigating single droplet drying of dairy products, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
    328. Schmidt, M., Bück, A., Tsotsas, E.: Experimental investigation of continuous fluidized bed spray granulation with internal classification,
      Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
    329. Hoffmann, T., Schmidt, M., Rieck, C., Bück, A., Peglow, M., Tsotsas, E.: Influence of drying conditions on the product quality during continuous fluidized bed spray granulation, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
    330. Dadkhah, M., Peglow, M., Tsotsas, E.: Analysis of the influence of drying rate on spatial morphology of agglomerates, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
    331. Meyer, K., Bück, A., Tsotsas, E.:  Multi-zone model for layering granulation in horizontal fluidized beds, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
    332. Rieck, C., Bück, A., Tsotsas, E.: Monte Carlo modelling of particle coating in fluidized beds, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
    333. Sondej, F., Bück, A., Tsotsas, E.: Experimental analysis of the micro-structure of single particles and micro-droplets, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
    334. Bachmann, P., Tsotsas, E.: Minimization of particle dispersion in a continuous horizontal fluidized bed, Proceedings of the 19th  International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
    335. Casciatori, F.P., Bück, A., Thomeo, J.C., Tsotsas, E.: Two-phase model describing heat and water transfer during solid-state fermentation within a packed bed bioreactor, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
    336. Calin-Sanchez, A., Kharaghani, A., Lech, K., Figiel, A., Carbonell-Barrachina, A.A., Tsotsas, E.: Physical and sensory properties of chokeberry fruits dried with different methods, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
    337. Hagemeier, T., Bück, A., Tsotsas, E.: Characterization of particle dynamics in fluidized beds by means of particle tracking velocimetry, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
    338. Casciatori, F.P., Bück, A., Tsotsas, E., Thoméo, J.: Coefficientes de interface para transferência de calor e água em bioreatores de fermentacão sólida, Proceedings of the XX Congresso Brasileiro de Engenharia Química, 19.-22. Oktober 2014,  Florianopolis/Brasilien
    339. Börner, M., Hagemeier, T., Ganzer, G., Peglow, M., Tsotsas, E.: Experimental spray zone characterization in top-spray fluidized bed granulation, Chem. Eng. Sci., 116 (2014), 317-330
    340. Dadkhah, M., Tsotsas, E.: Study of the morphology of solidified binder in spray fluidized bed agglomerate by X-ray tomography, Powder Technol., 264 (2014), 256-264
    341. Rieck, C., Hoffmann, T., Bück, A., Peglow, M., Tsotsas, E.: Influence of drying conditions on layer in fluidized bed spray granulation, Powder Technol., 272 (2015), 120-131
    342. Bück, A., Palis, S., Tsotsas, E.: Model-based control of particle properties in fluidized bed spray granulation, Powder Technol., 270 (2015), 575-583
    343. Ashraf, A., Börner, M., Peglow, M., Janiga, G., Seidel-Morgenstern, A., Thévenin, D.: Coupled computational fluid dynamics - discrete element method simulations of a pilot-scale batch crystallizer, Cryt. Growth Des., 15 (2015), 145-155
    344. Calin-Sanchez, A., Kharaghani, A., Lech, K., Figiel, A., Carbonell-Barrachina, A., Tsotsas, E.: Drying kinetics and microstructural and sensory properties of black chokeberry (aronia melanocarpa) as affected by drying method, Food Bioprocess Technol., 8 (2015), 63-74
    345. Schmidt, M., Bück, A., Tsotsas, E.: Experimental investigation of process stability of continuous spray fluidized bed layering with internal separation, Chem. Eng. Sci., 126 (2015), 55-66
    346. Sondej, F., Bück, A., Koslowsky, K., Bachmann, P., Jacob, M., Tsotsas, E.: Investigation of coating layer morphology by micro-computed X-ray tomography, Powder Technol., 273 (2015), 165-175
    347. Hussain, M., Kumar, J., Tsotsas, E.: Modeling aggregation kinetics of fluidized bed spray agglomeration for porous particles, Powder Technol., 270 (2015), 584-591
    348. Rieck, C., Bück, A., Tsotsas, E.:  Modeling of layering growth processes using a Monte Carlo Approach, Proceedings of the 8th International Conference on Mathematical Modelling (MATHMOD 2015), 18. Februar - 20. Februar 2015, Wien
    349. Mehakpreet, S., Kumar, J., Bück, A.: A volume conserving discrete formulation of aggregation population balance equations on non-uniform meshes, Proceedings of the 8th International Conference on Mathematical Modelling (MATHMOD 2015), 18. Februar - 20. Februar 2015, Wien
    350. Sun, Y., Kharaghani, A., Metzger, T., Müller, J., Tsotsas, E.: Lotion distribution in wet wipes investigated by pore network simulation and X-ray micro tomography, Transp. Porous Med., 107 (2015), 449-468
    351. Hagemeier, T., Börner, M., Bück, A., Tsotsas, E.: A comparative study on optical techniques for the estimation of granular flow velocities, Chem. Eng. Sci., 131 (2015), 63-75
    352. Hussain, M., Kumar, J., Tsotsas, E.: A new framework for population balance modeling of spray fluidized bed agglomeration, Particuology, 19 (2015), 141-154
    353. Bück, A., Casciatori, F.P., Thoméo, J.C., Tsotsas, E.:  Model-based control of enzyme yield in solid state fermentation, Proc. Eng. 102 (2015), 362-371
    354. Hoffmann, T., Rieck, C., Bück, A., Peglow, M., Tsotsas, E.: Influence of granule porosity during fluidized bed spray granulation, Proc. Eng. 102 (2015), 458-467
    355. Schmidt, M., Bück, A., Tsotsas, E.: Experimental investigation of the continuous fluidized bed spray granulation with internal classification, Proc. Eng. 102 (2015), 565-574
    356. Bachmann, P., Tsotsas, E.: Analysis of RTD data of a horizontal fluidized bed, Proc. Eng. 102 (2015), 790-798
    357. Hagemeier, T., Bück, A., Tsotsas, E.: Estimation of particle rotation in fluidized beds by means of PTV, Proc. Eng. 102 (2015), 841-849
    358. Rieck, C., Bück, A., Tsotsas, E.: Stochastic modelling of particle coating in fluidized beds, Proc. Eng. 102 (2015), 996-1005
    359. Hussain, M., Kumar, J., Tsotsas, E.: A new approach in population  balance modeling of spray fluidized bed agglomeration, Proc. Eng. 102 (2015), 1399-1407
    360. Meyer, K., Bück, A., Tsotsas, E.: Dynamic multi-zone population balance model of particle formulation in fluidized bed, Proc. Eng. 102 (2015), 1456-1465
    361. Jaskulski, M., Tran, T.T.H., Avila-Acevedo, J.G., Tsotsas, E.: Experimental determination of dring kinetics of skim-milk suspended droplet, Proceedings of the Nordic Baltic Drying Conference (NBDC 2015), 17.-19. Juni 2015, Gdańsk/Polen
    362. Tran, T.T.H., Jaskulski, M., Peglow, M., Avila-Acevedo, J.G., Tsotsas, E.: A new validated model for single droplet drying process,  Proceedings of the Nordic Baltic Drying Conference (NBDC 2015), 17.-19. Juni 2015, Gdańsk/Polen
    363. Rahimi, A., Kharaghani, A., Metzger, T., Tsotsas, E.: Pore network model for drying of salt solutions: Solute migration and crystallization, Proceedings of the Nordic Baltic Drying Conference (NBDC 2015), 17.-19. Juni 2015, Gdańsk/Polen
    364. Hagemeier, H., Jiang, Z., Bück, A., Tsotsas, E.: Discrete analysis of particle collision behavior in fluidized beds, Proceedings of the 7th International Granulation Workshop, 1.-3. Juli 2015, Sheffield/England
    365. Sondej, F., Bück, A., Tsotsas, E.: Experimental analysis of the microstructure of single particles, Proceedings of the 7th International Granulation Workshop, 1.-3. Juli 2015, Sheffield/England
    366. Saha, J., Kumar., J., Bück, A., Tsotsas, E.: Finite volume approximations of population balance equations, Proceedings of the 7th International Granulation Workshop, 1.-3. Juli 2015, Sheffield/England
    367. Pashminehazar, R., Kharaghani, A., Tsotsas, E.: Micro-structure of maltodextrin agglomerates produced by fluidized bed, Proceedings of the 7th International Granulation Workshop, 1.-3. Juli 2015, Sheffield/England
    368. Bück, A., Neugebauer, C., Meyer, K., Palis, S., Diez, E. Kienle, A., Heinrich, S., Tsotsas, E.: Influence of nozzle configuration on process stability of continuous fluidized bed layering with external classification, Proceedings of the 7th International Granulation Workshop, 1.-3. Juli 2015, Sheffield/England
    369. Mielke, L., Hoffmann,T., Peglow, M., Henneberg, M., Bück, A., Tsotsas, E.: Reduction of energy consumption in batch fluidized bed layering granulation processes by temporal separation, Proceedings of the 7th International Granulation Workshop, 1.-3. Juli 2015, Sheffield/England
    370. Rieck, C., Bück, A., Tsotsas, E.: Stochastic modeling of layering growth processes in fluidized beds, Proceedings of the 7th International Granulation Workshop, 1.-3. Juli 2015, Sheffield/England
    371. Schmidt, M., Rieck, C., Bück, A., Tsotsas, E.: Experimental investigation of process stability of continuous spray fluidized bed layering with external product separation, Chem. Eng. Sci., 137 (2015), 466-475
    372. Kumar, J., Saha, J., Tsotsas, E.: Development and convergence analysis of a finite volume scheme for solving breakage equation,
      SIAM J. Numer. Anal., 53-4 (2015), 1672-1689
    373. Hagemeier, T., Roloff, C., Bück, A., Tsotsas, E.: Estimation of particle dynamics in 2-D fluidized beds using particle tracking velocimetry,
      Particuology, 22 (2015), 39-51
    374. Khalloufi, S., Kharaghani, A., Almeida-Rivera, C., Nijsse, J., v. Dalen, G., Tsotsas, E.: Monitoring of initial porosity and new pores formation during drying: A scientific debate and a technical challenge, Trends in Food Sci. Technol., 45 (2015), 179-186
    375. Idakiev, V., Marx, S., Roßau, A., Bück, A., Tsotsas, E., Mörl, L.: Inductive heating of fluidized beds: Influence on fluidization behavior,
      Powder Technol., 286 (2015), 90-97
    376. Hoffmann, T., Rieck, C., Schmidt, M., Bück, A., Peglow, M., Tsotsas, E.: Prediction of shell porosities in continuous fluidized bed spray layering, Drying Technol., 33 (2015), 1662-1670
    377. Vorhauer, N., Wang, Y.J., Kharaghani, A., Tsotsas, E., Prat, M.: Drying with formation of capillary rings in a model porous media, Transp. Porous Med., 110 (2015), 197-223
    378. Rahimi, A., Kharaghani, A., Metzger, T., Tsotsas, E.:  Pore network simulations of salt crystalization in drying porous media, Proceedings of the 5th European Drying Conference (EuroDrying 2015), 21.-23. Oktober 2015, Budapest/Hungary
    379. Le, K.H., Kharaghani, A., Tsotsas, E.: Pore network simulation of heat and mass transfer in superheated steam drying, Proceedings of the 5th European Drying Conference (EuroDrying 2015), 21.-23. Oktober 2015, Budapest/Hungary
    380. Jaskulski, M., Tran, T.T.H., Avila-Acevedo, J.G., Tsotsas; E.: An advanced modeling and experimental validation of single droplets drying process,  Proceedings of the 29th EFFoST Conference, 10.-12. November 2015, Athens, Greece
    381. Tsotsas, E.: Multiscale approaches to processes that combine drying  with particle formation, Drying Technol., 33  (2015), 1859-1871
    382. Dreyschultze, C., Neugebauer, C., Palis, S., Bück, A., Tsotsas, E., Heinrich, S., Kienle, A.: Influence of zone formation on stability of continuous fluidized bed layering granulation with external product classification, Particuology, 23 (2015), 1-7
    383. Mirdrikvand, M., Imani Moqadam, S., Kharaghani, A., Roozbehani, B., Jadidi, N.: Optimization of a pilot-scale amine scrubber to remove SO2: higher selectivity and lower solvent consumption, Chem. Eng. Technol., 39 (2015), 246-254
    384. Imani Moqadam, S., Mirdrikvand, M., Roozbehani, B., Kharaghani, A., Shishehsaz, M.R.: Polystyrene pyrolysis using silica-alumina  catalyst in fluidized bed reactor, Clean Techn. Environ. Policy, 17 (2015), 1847-1860
    385. Wu, R., Kharaghani, A., Tsotsas, E.: Two-phase flow with capillary valve effect in porous media, Chem. Eng. Sci., 139 (2016), 241-248
    386. Zarekar, S., Bück, A., Jacob, M., Tsotsas, E.: Reconsideration of the hydrodynamic behavior of fluidized beds operated under reduced pressure, Powder Technol., 287 (2016), 169-176
    387. Sondej, F., Bück, A., Tsotsas, E.: Comparative analysis of the coating thickness on single particles using X-ray micro-computed  tomography and confocal laser-scanning microscopy, Powder Technol., 287 (2016), 330-340
    388. Casciatori, F.P., Bück, A., Thoméo, J., Tsotsas, E.: Two phase and two-dimensional model describing heat and water transfer during solid-state fermentation within a packed-bed bioreactor, Chem. Eng. J., 287 (2016), 103-116
    389. Scaar, H., Franke, G., Weigler, F., Delele, M., Tsotsas, E., Mellmann, J.: Experimental and numerical study of the airflow distribution in mixed-flow grain dryers, Drying Technol., 34  (2016), 595-607
    390. Pashminehazar, R., Kharaghani, A., Tsotsas, E.: Development of 3D morphological descriptors for agglomerates with complex structures, Proceedings of the 6th Conference on Industrial Computed Tomography, 9.-12. Februar 2016, Wels, Österreich
    391. Sondej, F., Rieck, C., Schmidt, M., Bück, A., Tsotsas, E.: Use of X-ray micro-computed tomography in pharmaceuticals and food industry, Proceedings of the Conference on Industrial Computed Tomography, 9.-12. Februar 2016, Wels, Österreich
    392. Wu, R., Kharaghani, A., Tsotsas, E.: Capillary valve effect during slow drying of porous media, Int. J. Heat Mass Transfer, 94 (2016), 81-86
    393. Le, K.H., Kharaghani, A., Tsotsas, E.: Pore network simulations of superheated steam drying, Proceedings of the International Congress on Particle Technology, PARTEC, 19.-21. April 2016, Nürnberg
    394. Pashminehazar, R., Kharaghani, A., Tsotsas, E.: Influence of process conditions on the morphology of maltodextrin agglomerates investigated by 3D X-ray images, Proceedings of the International Congress on Particle Technology, PARTEC, 19.-21. April 2016, Nürnberg
    395. Bück, A., Schmidt, M., Tsotsas, E.: Process control of continuous fluidised bed layering with internal product classification by MPC, Proceedings of the International Congress on Particle Technology, PARTEC, 19.-21. April 2016, Nürnberg
    396. Zarekar, S., Bück, A., Jacob, M., Tsotsas, E.: CFD simulation of the hydrodynamics of fluidized beds operated under reduced pressure,
      Proceedings of the International Congress on Particle Technology, PARTEC, 19.-21. April 2016, Nürnberg
    397. Palis, S., Neugebauer, C., Bück, A., Heinrich , S., Tsotsas , E., Kienle, A.: Control of multi-chamber continuous fluidized bed spray granulation, Proceedings of the International Congress on Particle Technology, PARTEC, 19.-21. April 2016, Nürnberg
    398. Sondej, F., Bück, A., Tsotsas, E.: Investigation of the microstructure of single particles using μ-computed tomography and confocal microscopy, Proceedings of the International Congress on Particle Technology, PARTEC, 19.-21. April 2016, Nürnberg
    399. Mielke, L., Hoffmann, T., Bück, A., Tsotsas, E., Henneberg, M., Peglow, M.: Process intensification of batch fluidized bed layering granulation processes by temporal separation of sub-processes, Proceedings of the International Congress on Particle Technology, PARTEC, 19.-21. April 2016, Nürnberg
    400. Schmidt, M., Bück, A., Tsotsas, E.: Spray fluidized bed agglomeration of amorphous food powders, Proceedings of the International Congress on Particle Technology, PARTEC, 19.-21. April 2016, Nürnberg
    401. Jiang, Z., Hagemeier, T., Bück, A., Tsotsas, E.: Particle dynamics and mixing behavior in a poly-disperse gas-solid fluidized bed by color-PTV measurements, Proceedings of the International Congress on Particle Technology, PARTEC, 19.-21. April 2016, Nürnberg
    402. Idiakiev, V., Bück, A., Tsotsas, E., Mörl, L.: Modellbasierte Untersuchung des Wärmeübergangs in einer induktiv beheizten Wirbelschicht, Chem.-Ing.-Techn., 88 (2016), 656-665
    403. Sun, Y., Kharaghani, A., Tsotsas, E.: Micro-model experiments and pore network simulations of liquid imbibition in porous media,
      Chem. Eng. Sci., 150 (2016), 41-53
    404. Kumar, J., Kaur, G., Tsotsas, E.: An accurate and efficient discrete formulation of aggregation population balance equation, Kinetic and Related Models, 9 (2016), 373-391
    405. Rahimi, A., Metzger, T., Kharaghani, A., Tsotsas, E.: Interaction of droplets with porous structures: Pore network simulation of wetting and drying, Drying Technol., 34 (2016), 1129-1140
    406. Singh, M., Kumar, J., Bück, A., Tsotsas, E.: A volume-consistent discrete formulation of aggregation population balance equations,
      Math. Meth. Appl. Sci., 39 (2016), 2275-2286
    407. Saha, J., Kumar, J., Bück, A., Tsotsas, E.: Finite volume approximations of breakage population balance equation, Chem. Eng. Res. Des. 110 (2016), 114-122
    408. Rieck, C., Bück, A.: Mathematische Modellierung der Partikelformulierung in Trommelgranulatoren, Chem.-Ing.-Tech. 88 (2016), 841-849
    409. Rieck, C., Bück, A., Tsotsas, E.: Monte Carlo modeling of fluidized bed coating and layering processes, AIChE J., 62 (2016), 2670-2680
    410. Tran, T.T.H., Avila-Acevedo, J.G., Tsotsas, E.: Enhanced methods for experimental investigation of single droplet drying kinetics and application to lactose/water, Drying Technol., 34 (2016), 1185-1195
    411. Mielke, L., Hoffmann, T., Henneberg, M., Peglow, M., Bück, A., Tsotsas, E.: Reduction of energy consumption in batch fluidized bed layering granulation processes by temporal separation, Chem. Eng. Res. Des., 110 (2016), 2-11
    412. Singh, M., Kumar, J., Bück, A., Tsotsas, E.: An improved and efficient finite volume scheme for bivariate aggregation population balance equation, J. Comp. Appl. Math., 308 (2016), 83-97
    413. Bück, A., Dürr, R., Schmidt, M., Tsotsas, E.: Model predictive control of continuous layering granulation in fluidised beds with internal product classification, Journal of Process Control, 45 (2016), 65-75
    414. Idakiev, V., Bück, A., Tsotsas, E., Mörl, L.: Modellbasierte Berechnung des Benetzungsgrades in einer zylindrischen Wirbelschicht mit Flüssigkeitseindüsung, Chem.-Ing.-Tech., 88 (2016), 1109-1118
    415. Neugebauer, C., Palis, S., Bück, A., Diez, E., Heinrich, S., Tsotsas, E., Kienle, A.: Influence of mill characteristics on stability of continuous layering, granulation with external product classification, Proceedings of the 26th European Symposium on Computer Aided Process Engineering, ESCAPE, 12.-15. Juni 2016, Portorož/Slovenia
    416. Bück, A, Wegner, M., Neugebauer, C., Palis, S., Tsotsas, E.: Bifurcation analysis of process stability of continuous fluidized bed agglomeration with external product classification, Proceedings of the 26th European Symposium on Computer Aided Process Engineering, ESCAPE, 12.-15. Juni 2016, Portorož/Slovenia
    417. Bück, A., Neugebauer, C., Meyer, K., Palis, S., Diez, E., Kienle, A., Heinrich, S., Tsotsas, E.: Influence of operation parameters on process stability in continuous fluidised bed layering with external product classification, Powder Technol., 300 (2016), 37-45
    418. Moghaddam, A.A., Kharaghani, A., Tsotsas, E., Prat, M.: Equivalence of the one-dimensional moisture diffusion model and the three-dimensional pore network drying model, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
    419. Zarekar, S., Bück, A., Jacob, M., Tsotsas, E.: Model for drying and inactivation of baker’s yeast particles in fluidized beds operated under reduced pressure, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
    420. Le, K.H., Kharaghani, A., Kirsch, C., Tsotsas, E.: Discrete pore network modeling of superheated steam drying, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
    421. Rahimi, A., Kharaghani, A., Metzger, T., Tsotsas, E.: Pore network modelling of a salt solution droplet on a porous substrate: Imbibition, evaporation and crystallization, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
    422. Jiang, Z., Bück, A., Hagemeier, T., Tsotsas, E.: CFD-DEM study of residence time and collision velocity in a binary Wurster fluidized bed, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
    423. Tran, T.T.H., Jaskulski, M., Kharaghani, A., Tsotsas, E.: Reduction of a model for single droplet drying and application for CFD spray drying simulation, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
    424. Rieck, C., Bück, A., Tsotsas, E.: Monte-Carlo modeling of binder-less agglomeration in fluidized beds, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
    425. Müller, D., Rieck, C., Bück, A., Tsotsas, E.: Modelling of continuous spray-coating in fluidized bed with a vertical tube air classifier, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
    426. Idakiev, V., Mielke, L., Bück, A., Tsotsas, E., Mörl, L.: Applications of inductive energy input in fluidized beds, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
    427. Hoffmann, T., Mielke, L., Henneberg, M., Peglow, M., Bück, A., Tsotsas, E.: Energy saving potential in batch fluidized bed granulation process by temporal separation of sub-processes, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
    428. Bück, A., Dürr, R., Vorhauer, N., Friese, L., Tsotsas, E.: Feedback control of microwave drying of solids, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
    429. Chen, K., Schmidt, M., Bück, A., Jacob, M., Tsotsas, E.: A model-based investigation of particle drying process in multi-stage fluidized bed, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
    430. Shamaei, S., Seiiedlou, S.S., Aghbashlo, M., Tsotsas, E., Kharaghani, A.: Optimization of the walnut oil microencapsulation process using the response surface methodology, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
    431. Schmidt, M., Bück, A., Tsotsas, E.: Influence of drying conditions in spray fluidized bed agglomeration behavior of amorphous food powders, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
    432. Vorhauer, N., Rahimi, A., Tsotsas, E., Prat, M.: Non-isothermal drying of thin porous disks, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
    433. Zarekar, S., Bück, A., Jacob, M., Tsotsas, E.: CFD simulation of spray dynamics in a fluidized bed operated under reduced pressure, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
    434. Jaskulski, M., Meyer, K., Tsotsas, E.: How do thermal effects influence granule properties in a horizontal fluidized bed? Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
    435. Pashminehazar, R., Kharaghani, A., Tsotsas, E.: Three dimensional characterization of morphology and internal structure of soft material agglomerates produced in spray fluidized bed by X-ray tomography, Powder Technol., 300 (2016), 46-60
    436. Bachmann, P., Bück, A., Tsotsas, E.: Investigation of the residence time behavior of particulate products and correlation for the Bodenstein number in horizontal fluidized beds, Powder Technol., 301 (2016), 1067-1076
    437. Idakiev, V., Bück, A., Tsotsas, E., Mörl, L.: Inductive heating of a cylindrical fluidized bed, J. Chem. Technol.  Metall., 51 (2016), 627-638
    438. Le, K.H., Kharaghani, A., Kirsch, C., Tsotsas, E.: Pore network simulations of heat and mass transfer inside an unsaturated capillary porous wick in the dry-out regime, Transp. Porous Med., 114 (2016), 623-648
    439. Shamaei, S., Kharaghani, A., Seiiedlou, S.S., Aghbashlo, M., Sondej, F., Tsotsas, E.: Drying behavior and locking point of single droplets containing functional oil,  Adv. Powder Techn., 27 (2016), 1750-1760
    440. Börnhorst, M., Walzel, P., Rahimi, A., Kharaghani, A., Tsotsas, E., Nestle, N., Besser, A., Kleine Jäger, F., Metzger, T.: Influence of pore structure and impregnation-drying conditions on the solid distribution in porous support materials, Drying Technol., 34 (2016), 1964-1974
    441. Mirdrikvand, M., Imani, M.S., Kharaghani, A., Roozbehani, B.: Optimization of a pilot-scale amine scrubber to remove SO2: Higher selectivity and lower solvent consumption, Chem. Eng. Techn., 39 (2016), 246-254
    442. Idakiev, V., Lazarova, P., Bück, A., Tsotsas, E., Mörl, L.: Inductive heating of fluidized beds: Drying of particulate solids, Powder Technol., 306 (2017), 26-33
    443. Farid, M.U., Bück, A., Heineken, Gohla, M., Zobel, N.: Study on nozzle design for combustion of solid materials with low melting points,
      Appl. Thermal. Eng., 115 (2017), 832-859
    444. Bachmann, P., Bück, A., Tsotsas, E.: Experimental investigation and correlation of the Bodenstein number in horizontal fluidized beds with internal baffles, Powder Technol., 308 (2017), 378-387
    445. Börner, M., Bück, A., Tsotsas, E.: DEM-CFD investigation of particle residence time distribution in top-spray fluidized bed granulation,
      Chem. Eng. Sci., 161 (2017), 187-197
    446. Tran, T.T.H., Jaskulski, Avila-Acevedo, J., Tsotsas, E.: Model parameters for single-droplet drying of skim milk and its constituents at moderate and elevated temperatures, Drying Technol., 35 (2017), 444-464
    447. Neugebauer, C., Palis, S., Bück, A., Tsotsas, E., Heinrich, S., Kienle, A.: A dynamic two-zone model of continuous fluidized bed layering granulation with internal product classification, Particuology, 31 (2017), 8-14
    448. Tada, E.F.R., Bück, A., Casciatori, F.P., Tsotsas, E., Toméo, J.C.: Investigation of heat transfer in partially filled horizontal drums,
      Chem. Eng. J., 316 (2017), 988-1003
    449. Moghaddam, A., Kharaghani, A., Tsotsas, E., Prat, M.: Kinematics in a slowly drying porous medium: Reconciliation of pore network simulations and continuum modeling, Physics of Fluids, 29 (2017), 022102
    450. Shamaei, S., Seiiedlou, S.S., Aghbashlo, M., Tsotsas, E., Kharaghani, A.: Microencapsulation of walnut oil by spray drying: Effects of wall material and drying conditions on physicochemical properties of microcapsules, Innovative Food Sci. Emerg. Technol., 39 (2017), 101-112
    451. Meyer, K., Bück, A., Tsotsas, E.: Determination of particle exchange rates at over-flow weirs in horizontal fluidized beds by particle tracking velocimetry, Particuology, 32 (2017), 1-9
    452. Jiang, Z., Hagemeier, T., Bück, A., Tsotsas, E.: Experimental measurements of particle collision dynamics in a pseudo-2D gas-solid fluidized bed, Chem. Eng. Sci., 167 (2017), 297-316
    453. Idakiev, V., Graner, S., Bück, A., Tsotsas, E., Mörl, L.: Wärmeübergangsuntersuchungen in einer induktiv beheizten Wirbelschicht mit heterogener Schichtzusammensetzung, Chem.-Ing.-Tech., 89 (2017), 772-784
    454. Vorhauer, N., Mirsadraee, N., Tretau, A., Bück, A., Tsotsas, E., Prat, M.: Combined convective and microwave drying of wet clay, Proceedings of the Nordic Baltic Drying Conference (NBDC2017) 7.-9. Juni 2017, Hamburg
    455. Idakiev, V., Bück, A., Tsotsas, E., Mörl, L.: Inductive energy input in fluidized beds and its applications, Proceedings of the Nordic Baltic Drying Conference (NBDC2017) 7.-9. Juni 2017, Hamburg
    456. Moghaddam, A.A., Kharaghani, A., Tsotsas, E., Prat, M.: Insights into the velocity field in a slowly drying capillary porous medium, Proceedings of the 6th European Drying Conference (EuroDrying 2017), 19.-21. Juni 2017, Liège/Belgien
    457. Vorhauer, N., Ahmad, F., Tretau, A., Bück, A., Tsotsas, E., Prat, M.: Pore scale investigation of drying under periodic temperature variation, Proceedings of the 6th European Drying Conference (EuroDrying 2017), 19.-21. Juni 2017, Liège/Belgien
    458. Le, K.H., Kharaghani, A., Tsotsas, E.: Impact of heating modes on the behavior of superheated steam drying in capillary porous media, Proceedings of the 6th European Drying Conference (EuroDrying 2017), 19.-21. Juni 2017, Liège/Belgien
    459. Mielke, L., Hoffmann, T., Peglow, M., Henneberg, M., Bück, A., Tsotsas, E.: Energy efficiency and scale-up of fluidized bed coating processes with temporal separation of layering and particle drying, Proceedings of the 8th International Granulation Workshop, 28.-30. Juni 2017, Sheffield/England
    460. Jiang, Z., Rieck, C., Bück, A., Tsotsas, E.: Estimation of coefficient of restitution of irregular shaped particles on horizontal substrates, Proceedings of the 8th International Granulation Workshop, 28.-30. Juni 2017, Sheffield/England
    461. Rieck, C., Bück, A., Tsotsas, E.: Influence of contact liquid dispersion on fluidized bed spray agglomeration,  Proceedings of the 8th International Granulation Workshop, 28.-30. Juni 2017, Sheffield/England
    462. Müller, D., Bück, A., Tsotsas, E.: Modelling of one-stage continuous fluidized bed spray-coating, Proceedings of the 8th International Granulation Workshop, 28.-30. Juni 2017, Sheffield/England
    463. Wu, R., Tsotsas, E., Kharaghani, A.: Convective drying in thin hydrophobic porous media, Int. J. Heat Mass Transfer, 112 (2017), 630-642
    464. Hiep, K.L., Kharaghani, A., Kirsch, C., Tsotsas, E.: Discrete pore network modeling of superheated steam drying, Drying Technol., 35 (2017), 1584-1601
    465. Tran, T.T.H., Jaskulski, Tsotsas, E.: Reduction of a model for single droplet drying and application to CFD of skim milk spray drying, Drying Technol., 35 (2017), 1571-1583
    466. Chen, K., Bachmann, P., Bück, A., Jacob, M., Tsotsas, E.: Experimental  study and modeling of particle drying in a continuously-operated horizontal fluidized bed, Particuology, 34 (2017), 134-146
    467. Schmidt, M., Bück, A., Tsotsas, E.: Shell porosity in spray fluidized bed coating with suspensions, Adv. Powder Technol., 28 (2017), 2921-2928
    468. Schmidt, M., Bück, A., Tsotsas, E.: Experimental investigation of the influence of drying conditions on process stability of continuous spray fluidized bed layering granulation with external product separation, Powder Technol., 320 (2017), 474-482
    469. Fischer, C., Jaskulski, M., Tsotsas, E.: Inline method of droplet and particle size distribution analysis in dilute disperse systems, Adv. Powder Technol., 28 (2017), 2820-2829
    470. Jaskulski, M., Atuonwu, J.C., Tran, T.T.H., Stapley, A.G.F., Tsotsas, E.: Predictive CFD modelling of whey protein denaturation in skim milk spray drying powder productions, Adv. Powder Technol., 28 (2017), 3140-3147
    471. Moghaddam, A., Prat, M., Tsotsas, E., Kharaghani, A.: Evaporation in capillary porous media at the perfect piston-like invasion limit: Evidence of nonlocal equilibrium effects, Water Resources Research, 53 (2017), 10422-10449
    472. Jiang, Z., Hagemeier, T., Bück, A., Tsotsas, E.: Color-PTV measurement and CFD-DEM simulation of poly-disperse particle systems in a pseudo-2D fluidized bed, Chem. Eng. Sci., 179 (2018), 115-132
    473. Jiang, Z., Bück, A., Tsotsas, E.: CFD-DEM study of residence time, droplet deposition, and collision velocity for a binary particle mixture in a Wurster fluidized bed coater, Drying Technol., 36 (2018), 638-650
    474. Vorhauer, N., Tsotsas, E., Prat, M.: Drying of thin porous disks from pore network simulations, Drying Technol., 36 (2018), 651-663
    475. Moghaddam, A., Kharaghani, A., Tsotsas, E., Prat, M.: A pore network study of evaporation from the surface of a drying non-hygroscopic porous medium, AIChE J., 64 (2018), 1435-1447
    476. Pashminehazar, R., Ahmed, S.J., Kharaghani, A., Tsotsas, E.: Spatial morphology of maltodextrin agglomerates from X-ray microtomographic data: Real structure evaluation vs. spherical primary particle model, Powder Technol., 331 (2018), 204-217
    477. Vu, H.T., Tsotsas, E.: Mass and heat transport models for analysis of the drying process in porous media: A review and numerical implementation, Intern. J. Chem. Eng., 2018, Article ID 9456418
    478. Neugebauer, C., Bück, A., Palis, S., Mielke, L., Tsotsas, E., Kienle, A.: Influence of thermal conditions on particle properties in fluidized bed layering granulation, Proceedings of the 6th International Conference on Population Balance Modelling (PBM), 06.-09. Mai 2018, Ghent/Belgien
    479. Golovin, I., Strenzke, G., Wegner, M., Palis, S., Bück, A., Kienle, A., Tsotsas, E.: Parameter identification for continuous fluidized bed spray agglomeration, Proceedings of the 6th International Conference on Population Balance Modelling (PBM), 06.-09. Mai 2018, Ghent/Belgien
    480. Hampel, N., Roydeva, E., Bück, A., Tsotsas, E.: Coating of finely dispersed particles by two-fluid nozzle, Particuology, 38 (2018), 80-93
    481. Le, K.H., Tsotsas, E., Kharaghani, A.: Continuum-scale modeling of superheated steam drying of cellular plant porous media, Int. J. Heat Mass Transfer, 124 (2018), 1033-1044
    482. Idakiev, V.V., Steinke, C., Sondej, F., Bück, A., Tsotsas, E., Mörl, L.: Inductive heating of fluidized beds: Spray coating process, Powder Technol., 328 (2018), 26-37
    483. Sondej, F., Peglow, M., Bück, A., Tsotsas, E.: Experimental investigation of the morphology of salt deposits from drying sessile droplets by white-light interferometry, AIChE J., 64 (2018), 2002-2016
    484. Zhang, L., Weigler, F., Idakiev, V., Jiang, Z., Mörl, L., Mellmann, J., Tsotsas, E.: Experimental study of the particle motion in flighted rotating drums by means of magnetic particle tracking, Powder Technol., 339 (2018), 817-826
    485. Rieck, C., Schmidt, M., Bück, A., Tsotsas, E.: Monte Carlo modeling of binder-less spray agglomeration in fluidized beds, AIChE J., 64 (2018), 3582-3594
    486. Le, K.H., Hampel, N., Kharaghani, A., Bück, A., Tsotsas, E.: Superheated steam drying of single wood particles: A characteristic drying curve model deduced from continuum model simulations and assessed by experiments, Drying Technol., 36 (2018), 1866-1881
    487. Diez, E., Meyer, K., Bück, A., Tsotsas, E., Heinrich, S.: Influence of process conditions on the product properties in a continuous fluidized bed spray granulation process, Chem. Eng. Res. & Design, 139 (2018), 104-115
    488. Strenzke, G., Golovin, I., Wegner, M., Palis, S., Bück, A., Kienle, A., Tsotsas, E.: Influence of drying conditions on process properties and parameter identification for continuous fluidized bed spray agglomeration, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
    489. Mielke, L.; Bück, A., Tsotsas, E.: Multi-zone & multi-compartment model for dynamic simulation of horizontal fluidized bed granulator, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
    490. Müller, D., Bück, A., Tsotsas, E.: Heat and mass transfer modelling of continuous Wurster-spray-granulation with external product classification, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
    491. Först, P., Lechner, M., Vorhauer, N., Schuchmann, H., Tsotsas, E.: Experimental investigation on pore size distribution and drying kinetics during lyophilizarion of sugar solutions, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
    492. Du, J., Bück, A., Tsotsas, E.: Investigation of spray agglomeration process in continuously operated horizontal fluidized bed, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
    493. Jiang, Z., Rieck, C., Bück, A., Tsotsas, E.: Modeling of particle behavior in a Wurster fluidized bed: Coupling CFD-DEM with Monte Carlo, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
    494. Jaskulski, M., Tran, H.T.T., Tsotsas, E.: CFD model-supported design of monodisperse co-current spray dryers, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
    495. Vorhauer, N., Först, P., Schuchmann, H., Tsotsas, E.: Pore network model of primary freeze drying, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
    496. Pham, T.S., Chareyre, B., Tsotsas, E., Kharaghani, A.: A pore-scale study on the drying kinetics and mechanical behavior of particle aggregates, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
    497. Zhang, L., Weigler, F., Jiang, Z., Idakiev, V., Mörl, L., Mellmann, J., Tsotsas, E.: Investigation of 3D particle flow in a flighted rotating drum, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
    498. Rahimi, A., Metzger, T., Kharaghani, A., Tsotsas, E.: Discrete modelling of ion transport and crystallization in layered porous media during drying, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
    499. Lu, X., Kharaghani, A., Tsotsas, E.: Dependency of continuum model parameters on the spatially correlated pore structure studied by pore-network drying simulations, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
    500. Vorhauer, N., Tsotsas, E., Prat, M.: Temperature gradient double stabilization of the evaporation front within a drying porous media, Phys. Rev. Fluids, 3 (2018), 114201
    501. Neugebauer, C., Bück, A., Palis, S., Mielke, L., Tsotsas, E., Kienle, A.: Influence of thermal conditions on particle properties in fluidized bed layering granulation, Processes, (2018), 6, 235
    502. Gouaou, I, Shamaei, S., Koutchoukali, M.B., Tsotsas, E., Kharaghani, A.: Impact of operating conditions on a single droplet and spray drying of hydroxypropylated pea starch: Process performance and final powder properties, Asia-Pac. J. Chem. Eng., e2268, (2018), 1-18
    503. Golovin, I., Strenzke, G., Dürr, R., Palis, S., Bück, A., Tsotsas, E., Kienle, A.: Parameter identification for continuous fluidized bed spray agglomeration, Processes, (2018), 6, 246
       
    504. Müller, D., Bück, A., Tsotsas, E.: Influence of separation properties and processing strategies on product characteristics in continuous fluidized bed spray granulation, Powder Technol., 342 (2019), 572-584
    505. Pashminehazar, R., Kharaghani, A., Tsotsas, E.: Determination of fractal dimension and prefactor of agglomerates with irregular structure, Powder Technol., 343 (2019), 765-774
    506. Tsotsas, E.: Particle-particle heat transfer in thermal DEM: Three competing models and a new equation, Int. J. Heat Mass Transfer, 132 (2019), 939-943
    507. Chen, K., Bachmann, P., Bück, A., Jacob, M., Tsotsas, E.: CFD simulation of particle residence time distribution in industrial scale horizontal fluidized bed, Powder Technol., 345 (2019), 129-139
    508. Kharaghani, A., Le, K.H., Tran, T.T.H., Tsotsas, E.: Reaction engineering approach for modeling single wood particle drying at elevated air temperature, Chem. Eng. Sci., 199 (2019), 602-612
    509. Vu, H.T., Tsotsas, E.: A framework and numerical solution of the drying process in porous media by using a continuous model, Intern. J. Chem. Eng., 2019, Article ID 9043670
    510. Strenzke, Bück, A., Tsotsas, E.: Experimental investigation of dynamic process stability of continuous fluidized bed spray agglomeration with internal classification, Proceedings of the International Congress on Particle Technology, PARTEC, 9.-11. April 2019, Nürnberg
    511. Pham, T.S., Chareyre, B., Tsotsas, E., Kharaghani, A.: Mechanical behaviour of particle aggregates during drying, Proceedings of the International Congress on Particle Technology, PARTEC, 9.-11. April 2019, Nürnberg
    512. Idakiev, V., Bück, A., Mörl, L., Tsotsas, E.: Inductive heating of fluidized beds: Mobile versus stationary heat exchange elements, Drying Technol., 37 (2019), 652-663
    513. Szadzinska, J., Lechtanska, J., Pashminehazar, R., Kharaghani, A., Tsotsas, E.: Microwave- and ultrasound-assisted convective drying of raspberries: Drying kinetics and microstructural changes, Drying Technol., 37 (2019), 1-12
    514. Zarekar, S., Bück, A., Jacob, M., Tsotsas, E.: Numerical study of the hydrodynamics of fluidized beds operated under sub-atmospheric pressure, Chem., Eng. J., 372 (2019), 1134-1153
    515. Jabbari, Y., Tsotsas, E., Kirsch, C., Kharaghani, A.: Determination of the moisture transport coefficient from pore network simulations of spontaneous imbibition in capillary porous media, Chem. Eng. Sci. 207 (2019), 600-610
    516. Hampel, N., Le, K.H., Kharaghani, A., Tsotsas, E.: Continuous modeling of superheated steam drying of single rice grains, Drying Technol., 37 (2019), 1583-1596
    517. Jiang, Z., Chen, K., Bück, A., Tsotsas, E.: Novel algorithm for particle tracking velocimetry (PTV) of non-spherical particles, Proceedings of the 9th International Granulation Workshop, 26.-27. Juni 2019, Lausanne/Switzerland
    518. Rieck, C., Müller, D., Bück, A., Tsotsas, E.: Modeling of undesired agglomeration in fluidized bed coating, Proceedings of the 9th International Granulation Workshop, 26.-27. Juni 2019, Lausanne/Switzerland
    519. Strenzke, G., Du, J., Bück, A., Tsotsas, E.: Experimental investigation of process behavior of continuous fluidized bed spray agglomeration with internal classification, Proceedings of the 9th International Granulation Workshop, 26.-27. Juni 2019, Lausanne/Switzerland
    520. Rahimi, A., Kharaghani, A., Metzger, T., Tsotsas, E.: Pore network modelling of a shrinking porous medium saturated with a solution, Proceedings of the 7th European Drying Conference (EuroDrying 2019), 10.-11. Juli 2019, Torino/Italy
    521. Foerst, P., Gruber, S., Hilmer, M., Vorhauer, N., Schulz, M., Tsotsas, E.: Freeze drying behavior of spray frozen and pelletized materials by neutron radiography and tomography, Proceedings of the 7th European Drying Conference (EuroDrying 2019), 10.-11. Juli 2019, Torino/Italy
    522. Mahmood, H., Lu, X., Tsotsas, E., Kharaghani, A.: The role of discrete capillary rings in mass transfer from the surface of capillary porous medium during drying, Proceedings of the 7th European Drying Conference (EuroDrying 2019), 10.-11. Juli 2019, Torino/Italy
    523. Vorhauer, N., Altaf, H., Tsotsas, E., Vidakovic-Koch, T.:Pore network simulation of gas-liquid distribution in porous transport layers,Processes, (2019), 7, 558
    524. Diez, E., Kieckhefen, P., Meyer, K., Bück, A., Tsotsas, E., Heinrich, S.:Particle dynamics in a multistaged fluidized bed: Particle transport behavior on micro-scale by discrete particle modelling, Adv. Powder Technol., 30 (2019), 2014-2031
    525. Singh, A.K., Tsotsas, E.:Stochastic model to simulate spray fluidized bed agglomeration: A morphological approach,Powder Technol., 355 (2019), 449-460
    526. Pramudita, D., Tsotsas, E.:A model of pulse combustion drying and breakup of colloidal suspension droplets,Powder Technol., 355 (2019), 755-769
    527. Vorhauer, N., Tretau, A., Bück, A., Prat, M.:Microwave drying of wet clay with intermittent heating, Drying Technol., 37 (2019), 664-678 

    528. Geistlinger, H., Ding, Yi, Apelt, B., Schlüter, S., Küchler, M., Reuter, D., Vorhauer, N.: Evaporation study based on micromodel Experiments: Comparison of theory and Experiment, Water Resources Research, 55 (2019), 6653-6672  

    529. Jiang, Z., Du, J., Rieck, C., Bück, A., Tsotsas, E.:PTV experiments and DEM simulations of the coefficient of restitution for irregular particles impacting on horizontal substrates,Powder Technol., 360 (2020), 352-365
    530. Jiang, Z., Rieck, C., Bück, A., Tsotsas, E.:Modeling of inter- and intra-particle coating uniformity in a Wurster fluidized bed by a coupled CFD-DEM-Monte Carlo approach,Chem. Eng. Sci., 211 (2020), 115289
    531. Le, K.H., Tran, H.T.T., Kharaghani, A., Tsotsas, E.:Experimental benchmarking of diffusion and reduced models for convective drying of single rice grains,Drying Technol., 38 (2020), 200-210
    532. Jaskulski, M., Tran, H.T.T., Tsotsas, E.:Design study of printer nozzle spray dryer by computational fluid dynamics modeling,Drying Technol., 38 (2020), 211-223
    533. Zhang, L., Jiang, Z., Weigler, F., Herz, F., Mellmann, J., Tsotsas, E.:PTV measurement and DEM simulation of the particle motion in a flighted rotating drum,Powder Technol., 363 (2020), 23-37
    534. Wu, R., Zhang, T., Ye, C., Zhao, C.Y., Tsotsas, E., Kharaghani, A.:Pore network model of evaporation in porous media with continuous and discontinuous corner films, Phys. Rev. Fluids, 5 (2020), 014307
    535. Du, J., Bück, A., Tsotsas, E.:Influence of process variables on spray agglomeration process in a continuously operated horizontal fluidized bed,Powder Technol., 363 (2020), 195-206
    536. Hilmer, M., Peters, J., Schulz, M., Gruber, S., Vorhauer, N., Tsotsas, E., Foerst, P.:Development of an experimental setup for in situ visualization using neutron radiography and computed tomography,Review of Scientific Instruments, 91 (2020), 014102
    537. Gruber, S., Vorhauer, N., Schulz, M., Hilmer, M., Peters, J., Tsotsas, E., Foerst, P.:Estimation of the local sublimation front velocities from neutron radiography and tomography of particulate matter,Chem. Eng. Sci., 211 (2020), 115268
    538. Singh, A. K., Tsotsas, E.:A tunable aggregation of spray fluidized bed agglomeration,Powder Technol., 364 (2020), 417-428
    539. Rezendes Tada, E.F., Bück, A., Tsotsas, E., Thoméo, J. C.:Mass transport in a partially filled horizontal drum: Modelling and experiments,Chem. Eng. Sci., 214 (2020), 115448
    540. Panda, D., Supriya, B., Kharaghani, A., Tsotsas, E., Surasani, V.K.:Lattice Boltzmann simulations for micro-macro interactions during isothermal drying of bundle of capillaries, Chem. Eng. Sci., 220 (2020), 115634
    541. Rieck, C., Bück, A., Tsotsas, E.:Estimation of the dominant size enlargement mechanism in spray fluidized bed processes,AIChE J., 2020, 66:e 16920
    542. Altaf, H., Vorhauer, N., Tsotsas, E., Vidakovic-Koch, T.:Steady-state water drainage by oxygen in anodic porous transport layer of electrolyzers: A 2D pore network study,Processes, 2020, 8(3):362
    543. Foerst, P., Gruber, S., Schulz, M., Vorhauer, N., Tsotsas, E.:Characterization of lyophilization of frozen bulky solids,Chem. Eng. Technol., 43 (2020), 789-796
    544. Bachmann, P., Chen, K., Bück, A., Tsotsas, E.:Prediction of particle size and layer-thickness distributions in a continuous horizontal fluidized-bed coating process,Particuology, 50 (2020), 1-12

    545. Le, K.H., Tran, T.T.H., Kharaghani, A., Tsotsas, E.:Modeling of superheated steam drying of wood particles,Journal of Mechanical Engineering Research and Developments, 43 (2020), 160-170

    546. Lu, X., Kharaghani, A., Tsotsas, E.:Transport parameters of macroscopic continuum model determined from discrete pore network simulations of drying porous media,Chem. Eng. Sci., 223 (2020), 115723

    547. Strenzke, G., Dürr, R., Bück, A., Tsotsas, E.:Influence of operating parameters on process behavior and product quality in continuous spray fluidized bed agglomeration,Powder Technol., 375 (2020), 210-220

    548. Vorhauer-Huget, N., Mannes, D., Hilmer, M., Gruber, S., Strobl, M., Tsotsas, E.,Foerst, P.:Freeze-drying with structured sublimation fronts – visualization with neutron imaging,Processes, 8 (2020), 1091

    549. Ahmad, F., Talbi, M., Prat, M., Tsotsas, E., Kharaghani, A.:Non-local equilibrium continuum modeling of partially saturated drying porous media: Comparison with pore network simulations,Chem. Eng. Sci., 228 (2020), 115957

    550. Vorhauer-Huget, N., Altaf, H., Dürr, R., Tsotsas, E., Vidakovic-Koch, T.:Computational optimization of porous structures for electrochemical processes,Processes, 8 (2020), 1205

    551. Lu, X., Kharaghani, A., Adloo, H., Tsotsas, E.:The Brooks and Corey capillary pressure model revisited from pore network simulations of capillarity-controlled invasion percolation process, Processes, 8 (2020), 131
    552. Zhang, R., Hoffmann, T., Tsotsas, E.: Novel technique for coating of fine particles using fluidized bed and aerosol atomizer, Processes, 8 (2020), 1525

    553. Zhang, T., Wu, R., Zhao, C.Y., Tsotsas, E., Kharaghani, A.: Capillary instability induced gas-liquid displacement in porous media: Experimental observation and pore network model, Phys. Rev. Fluids, 5 (2020), 104305

    554. Panda, D., Paliwal, S., Sourya, D.P., Kharaghani, A., Tsotsas, E., Surasani, V.K.: Influence of thermal gradients on the invasion patterns during drying of porous media: A Lattice Boltzmann Method, Physics of Fluids, 32 (2020), 122116

    555. Mezhericher, M., Rieck, C., Razorenov, N., Tsotsas, E.: Ultrathin coating of particles in fluidized bed using submicron droplet aerosol, Particuology, 53 (2020), 23-29

    556. Ahmad, F., Rahimi, A., Tsotsas, E., Prat, M., Kharaghani, A.: From micro-scale to macro-scale modeling of solute transport in drying capillary porous media, Int. J. Heat Mass Transfer, 154B (2021), 120722
    557. Le, K.H., Tran, T.T.H., Tsotsas, E., Kharaghani, A.: Superheated steam drying of single wood particles: Modeling and comparative study with hot air drying, Chem. Eng. Technol., 44 (2021), 114-123
    558. Lu, X., Tsotsas, E., Kharaghani, A.: Insights into evaporation from the surface of capillary porous media gained by discrete pore network simulations, Int. J. Heat Mass Transfer, 168 (2021), 120877
    559. Mielke, L., Bück, A., Tsotsas, E.: Multi-stage and multi-compartment model for dynamic simulation of horizontal fluidized bed granulator,Drying Technol., 39 (2021), 203-218
    560. Silva Canedo, M., Santos Figueiredo, M.F., Thomik, M., Vorhauer-Huget, N., Tsotsas, E., Thomeo, J.C.: Porosity and pore size distribution of beds composed by sugarcane bagasse and wheat bran for solid-state cultivation, Powder Technol., 386 (2021), 166-175
    561. Lu, X. Tsotsas, E., Kharaghani, A.: Drying of capillary porous media simulated by coupling of continuum-scale and micro-scale models, Int. J. Multiphase Flow, 140 (2021), 103654
    562. Briest, L., Tsotsas, E., Vorhauer-Huget, N.: Experimentelle Untersuchung der Mikrowellentrocknung von Sanitärkeramiken, Keramische Zeitschrift, 2 (2021), 36-42
    563. Janocha, M., Tsotsas, E.: In silico investigation of the evaporation flux distribution along sessile,droplet surfaces during convective drying, Chem. Eng. Sci., 238 (2021), 116590
    564. Du, J., Chen, K., Bück, A., Tsotsas, E.:Stochastic simulation of spray agglomeration process in a continuously operated horizontal fluidized bed by Monte Carlo method, Proceedings of the 13th International Conference on Fluidized bed Technology, CFB-13, Online, 10.-14. Mai 2021
    565. Janocha, M., Tsotsas, E.:Analysis of drying parameter effects on porosity evolution during successive layer build-up from dried deposited droplets, Proceedings of the 13th International Conference on Fluidized bed Technology, CFB-13, Online, 10.-14. Mai 2021
    566. Strenzke, G., Dürr, R., Bück, A., Kienle, A., Tsotsas, E.:Experimental investigation of process behaviour of continuous fluidized bed spray agglomeration with internal classification, Proceedings of the 13th International Conference on Fluidized bed Technology, CFB-13, Online, 10.-14. Mai 2021
    567. Singh, A.K., Tsotsas, E.:Stochastic simulation of spray fluidized bed agglomeration by modeling the morphology, Proceedings of the 13th International Conference on Fluidized bed Technology, CFB-13, Online, 10.-14. Mai 2021
    568. Zhang, R., Hoffmann, T., Tsotsas, E.: Novel technique for coating of fine particles using fluidized bed and aerosol atomizer, Proceedings of the 13th International Conference on Fluidized bed Technology, CFB-13, Online, 10.-14. Mai 2021
    569. Kharaghani, A., Mahmood, H.T., Wang, Y., Tsotsas, E.: Three-dimensional visualization and modeling of capillary liquid rings observed during drying of dense particle packings, Intern. J. Heat Mass Transfer, 177 (2021), 121505 
    570. Paliwal, S., Panda, D., Bhaskaran, S., Vorhauer-Huget, N., Tsotsas, E., Surasani, V.K.:Lattice Boltzmann method to study the wateroxygen distributions in porous transport layer (PTL) of polymer electrolyte membrane (PEM) electrolyser.Intern. J. Hydrogen Energy, 46 (2021), 22747-22762
    571. Gruber, S., Vorhauer-Huget, N., Schulz, M., Peters, J., Tsotsas, E., Foerst, P.: Beschreibung der Sublimationsfront in Schüttgütern mittels Neutronenradiografie und -tomografie, Pharm. Ind., 83 (2021), 694-704
    572. Zhang, L., Jiang, Z., Mellmann, J., Weigler, F., Herz, F., Bück, A., Tsotsas, E.: Influence of the number of flights on the dilute phase ratio in flighted rotating drums by PTV measurements and DEM simulations, Particuolgy, 56 (2021), 171-182
    573. Pramudita, D., Teiwes, A., Jacob, M., Tsotsas, E.: Crust breakage in production of fine particles using pulse combustion drying: Experimental and numerical investigations, Powder Technol., 393 (2021), 77-98
    574. Janocha, M., Tsotsas, E.: In-depth investigation of incremental layer build-up from dried deposited droplets, AIChE J., 66 (2021), e17436
    575. Otto, E., Dürr, R., Palis, Bück, A., Tsotsas, E., Kienle, A.: Kernel identification in continuous fluidized bed spray agglomeration from steady state data, Adv. Powder Technol., 32 (2021), 2517-2529
    576. Singh, A.K., Tsotsas, E.: A fast and improved tunable aggregation model for stochastic simulation of spray fluidized bed agglomeration, Energies, 14 (2021), 72221
    577. Mahmood, H.F., Tsotsas, E., Kharaghani, A.: The role of discrete capillary rings in mass transfer from the surface of a drying capillary porous medium, Transport Porous Media, 140 (2021), 351-369
    578. Singh, A.K., Tsotsas, E.: Influence of polydispersity and breakage on stochastic simulations of spray fluidized bed agglomeration, Chem. Eng. Sci., 247 (2022), 117022
    579. Hussain, F., Jaskulski, M., Piatkowski, M., Tsotsas, E.: CFD simulation of agglomeration and coalescence in spray dryer, Chem. Eng. Sci., 247 (2022), 117064

    580. Du, J., Strenzke, G., Bück, A., Tsotsas, E.: Monte Carlo modeling of spray agglomeration in a cylindrical fluidized bed: From batch-wise to continuous processes, Powder Technol., 396 (2022), 113-126

    581. Zhan, N., Wu, R., Tsotsas, E., Kharaghani, A.: Proposal for extraction of pore networks with pores of high aspect ratios, Phys. Rev. Fluids, 7 (2022), 014304
    582. Strenzke, G., Janocha, M., Bück, A., Tsotsas, E.: Morphological descriptors of agglomerates produced in continuously operated spray fluidized beds, Powder Technol., 397 (2022), 117111
    583. Pramudita, D., Humjaa, S., Tsotsas, E.: Droplet drying and whey protein denaturation in pulsed gas flow - modeling study, J. Food Eng., 321 (2022), 110959
    584. Bhaskaran, S., Pandey, D., Panda, D., Paliwal, S., Vorhauer, N., Tsotsas, E., Surasani, V.K.: Study on film effects during isothermal drying of square capillary tube using Lattice Boltzmann method, Drying Technol., 40 (2022), 735-747
    585. Thomik, M., Gruber, S., Foerst, P., Tsotsas, E., Vorhauer-Huget, N.: Structure of freeze dried maltodextrin, Drying Technol., 40 (2022), 748-766
    586. Wu, W., Chen, K., Tsotsas, E.: Prediction of particle mixing time in a rotary drum by 2D DEM simulations and cross-correlation, Adv. Powder Technol., 33 (2022), 103
    587. Panda, D., Bhaskaran, S., Paliwal, S., Kharaghani, A., Tsotsas, E., Surasani, V.K.: Pore-scale physics of drying porous media revealed by Lattice Boltzmann simulations, Drying Technol., 40 (2022), 1114-1129
    588. Janocha, M., Tsotsas, E.: Coating layer formation from deposited droplets: A comparison of nanofluid, microfluid and solution, Powder Technol., 399 (2022), 117202
    589. Pham, S.T., Chareyre, B., Tsotsas, E., Kharaghani, A.: Pore network modeling of phase distribution and capillary force evolution during slow drying of particle aggregates, Powder Technol., 407 (2022), 117627
    590. Vorhauer-Huget, N., Briest, L., Wagner, Tretau, A., Rahimi, A., Tsotsas, E.: Einsatz von Mikrowellenerwärmung zur Elektrifizierung der Ziegelrohlingstrocknung, ZI, 3 (2022), 8-24
    591. Briest, L., Wagner, R., Tretau, A., Tsotsas, E., Vorhauer-Huget, N.: Microwave-assisted drying of clay roof tiles, Drying Technol., 40 (2022), 1804-1818
    592. Thomik, M., Gruber, S., Kaestner, A., Foerst, P., Tsotsas, E., Vorhauer-Huget, N.: Experimental study of the impact of pore structure on drying kinetics and sublimation front  patterns, Pharmaceutics, 14 (2022), 1538
    593. Hussain, F, Sondej, F., Jaskulski, M., Peglow, M. Tsotsas, E.:Experimental determination of binary droplet-droplet collisions in spray drying atomization zone, Proceedings on 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA
    594. Du, J., Singh, A. Bück, A., Tsotsas, E.: Monte Carlo simulation of the influence of drying conditions on the spray agglomeration process in a continuously operated horizontal fluidized bed, Proceedings on 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA
    595. Singh, A., Tsotsas, E.: Modeling the agglomeration of spray-dried milk powder in a spray fluidized bed, Proceedings on 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA
    596. Janocha, M. Hussain, F., Tsotsas, E.: Direct numerical simulation of sessile droplet drying under varying convective conditions, Proceedings on 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA
    597. Müller, D., Briest, L., Bück, A., Tsotsas, E.: A two-zone continuum model of heat and mass transfer in Wurster fluidization, Proceedings on 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA
    598. Rieck, C., Bück, A., Tsotsas, E.: Estimation of the dominant size enlargement mechanism in spray fluidized beds, Proceedings on 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA
    599. Gruber, S., Vorhauer, N., Schulz, M., Xu, X., Hilmer, M., Thomik, M. Tsotsas, E., Schuchmann, H., Foerst, P.: Experimental investigations on freeze-drying of particulate matter by using neutron imaging, Proceedings on 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA
    600. Kolan, S., Wang, R., Hoffmann, T., Tsotsas, E.: Homo and Hetero agglomerate formation of nanoparticles in a spouted bed, Proceedings on 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA
    601. Lu, X., Tsotsas, E., Kharaghani, A.: Drying of capillary porous media simulated by coupling of continuum-scale and meso-scale models, Proceedings on 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA
    602. Mezhericher, M., Rieck, C., Razorenov, N., Tsotsas, E.: Ultrathin coating of particles in fluidized bed using aerosol of submicron droplets, Proceedings on 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA
    603. Briest, L., Vorhauer, N., Tretau, A., Wagner, R., Tsotsas, E.: Microwave drying of wet clay in pilot-scale plant, Proceedings on 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA
    604. Thomik, M., Briest, L., Vorhauer, N., Gruber, S., Först, P., Schuchmann, H., Tsotsas, E.: Evaluation of methods to represent the structure in tomographic images of freeze-dried porous media, Proceedings on 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA
    605. Hussain, F., Chen, K., Jaskulski, M., Piatkowski, M., Tsotsas, E.: Experimental study of the parametric impact on size growth of maltodextrin particles in counter-current spray dryer, Powder Technol., 409 (2022), 117792
    606. Bhaskaran, S., Pandey, D., Surasani, V.K., Tsotsas, E., Vidakovic-Koch, T., Vorhauer-Huget, N.: LBM studies at pore scale for graded anodic porous transport layer (PTL) of PEM water electrolyzer, Int. J. Hydrogen Energy, 74 (2022), 31551-31565
    607. Gruber, S., Thomik, M., Vorhauer-Huget, N., Hans, L., Tsotsas, E., Foerst, P.: The influence of local microstructure inhomogeneities on local drying kinetics during freeze-drying, Pharmaceutics, 14 (2022), 2132
    608. Milicic, T., Altaf, H., Vorhauer-Huget, N., Zivkoiv, L.A., Tsotsas, E., Vidakovic-Koch, T.: Modeling and analysis of mass transport losses of proton exchange membrane water electrolyzer, Processes, 10 (2022), 2417
    609. Singh, A., Tsotsas, E.: Agglomeration of spray-dried milk powder in a spray fluidized bed: A morphological modeling, Processes, 10 (2022), 2718
    610. Faridi, I.K., Tsotsas, E., Heineken, W., Koegler, M., Kharaghani, A.: Spatio-temporal prediction of temperature in fluidized bed biomass gasifier using dynamic recurrent neural network method, Appl. Thermal Eng. 219 (2023), 119334
    611. Rodrigues, S.J., Vorhauer-Huget, N., Richter, T., Tsotsas, E.: Influence of particle shape on tortuosity of non-spherical particle packed beds, Processes, 11 (2023), 3
    612. Akbas, S., Chen, K., Hoffmann, H., Scheffler, F., Tsotsas, E.: Investigation of island growth on fluidized particles coated by means in aerosol, Processes, 11 (2023), 165
    613. Men, J., Kolan, S.R., Massomi, A., Hoffmann, T., Schmidt, J., Tsotsas, E., Bück, A.: Formulation of nanostructured heteroaggregates by fluidization technologies, Chem.-Ing.-Techn., 95 (2023), 107-113
    614. Li, X., Chen, K., Wie, X., Jin, H., Wang, G., Guo, L., Tsotsas, E.: Distribution characteristics of salt crystals in a supercritical water fluidized bed reactor with CFD-PBM coupled model, Powder Technol., 420 (2023), 118357
    615. Pour, Y.D., Krasovitov, B., Fominykh, A., Hashemloo, Z., Kharaghani, A., Tsotsas, E., Levy, A.: Combined effect of acoustic field and gas absorption on evaporation of slurry droplet,Drying Technol., 41 (2023), 767-782
    616. Lu, Xiang, Tsotsas, E., Kharaghani, A.: Scale transition: Pore network study of how pore structure affects the macroscopic parameters of the continuum model for drying, Drying Technol., 41 (2023), 948-967
    617. Vorhauer-Huget, N., Thomik, M., Gruber, S., Först, P., Tsotsas, E.: Pore network simulation of heat and mass transfer during freeze-drying of porous media, Proceedings of the 8th European Drying Conference (EuroDrying 2023), 4 - 7 July 2023, Lodz/Poland
    618. Briest, L., Dharmananda, P., Tretau, A., Wagner, R., Tsotsas, E., Vorhauer-Huget, N.: Proceed, Proceedings of the 8th European Drying Conference (EuroDrying 2023), 4 - 7 July 2023, Lodz/Poland
    619. Chen, J., Lu, X., Kharaghani, A.: Evolution of pore structure during the drying of porous media, Proceedings of the 8th European Drying Conference (EuroDrying 2023), 4 - 7 July 2023, Lodz/Poland
    620. Gruber, S., Thomik, M., Vorhauer-Huget, N., Coppens, F., Tsotsas, E., Först, P.: In-situ analysis of the 3-D microstructure and its impact on the freeze-drying kinetics, Proceedings of the 8th European Drying Conference (EuroDrying 2023), 4 - 7 July 2023, Lodz/Poland
    621. Pour, Y.D., Krasovitov, B., Fominykh, A., Hashemloo, Z., Kharaghani, A., Tsotsas, E., Levy, A.: Spray drying of slurry droplets: effect of acoustic field and gas absorption, Proceedings of the 8th European Drying Conference (EuroDrying 2023), 4 - 7 July 2023, Lodz/Poland
    622. Hashemloo, Z., Pour, Y. D., Krasovitov, B., Fominykh, A., Levy, A., Tsotsas, E., Kharaghani, A.: Intensification of spray drying by absorption and desorption of soluble gases investigated experimentally at the level of single liquid droplets, Proceedings of the European Drying Conference (EuroDrying 2023), 4 - 7 July 2023, Lodz/Poland
    623. Hussain, F., Ali, F., Jaskulski, M., Piatkowski, M., Tsotsas, E.: Prediction of spray dried product properties using machine learning algorithms, Proceedings of the 8th European Drying Conference (EuroDrying 2023), 4 - 7 July 2023, Lodz/Poland
    624. Bürger, L.V., Jaskulski, M., Kharaghani, A.: CFD simulations of agglomeration in counter-current spray drying with fines return, Proceedings of the European Drying Conference (EuroDrying 2023), 4 - 7 July 2023, Lodz/Poland
    625. Kolan, S.R., Wang, R., Hoffmann, T., Tsotsas, E.: Mixing sub-micron particles in a ProCell type spouted bed,Powder Technol., 428 (2023), 118828
    626. Thomik, M., Faber, F., Gruber, S., Foerst, P., Tsotsas, E., Vorhauer-Huget, N.: A non-isothermal pore network model of primary freeze drying, Pharmaceutics, 15 (2023), 2131

       

    627. Fischer, J., Rodrigues, S.J., Kriegeskorte, M., Hilse, N., Illana, E., Scherer, V., Tsotsas, E.: Particle-particle contact heat transfer models in thermal DEM: A model comparison and experimental validation, Powder Technol., 429 (2023), 118909

    628. Guo, S., Chen, K., Tsotsas, E., Shang, F., Jin, H., Chen, Y., Guo, L.: A large-eddy simulation study of the transcritical mixing process in coaxial jet flow under supercritical condition, J. Supercritical Fluids, 203 (2023), 106080

    629. Rodrigues, S.J., Vorhauer-Huget, N., Tsotsas, E.: Prediction of effective thermal conductivity of packed beds of polyhedral particles, Powder Technol., 430 (2023), 118997

    630. Sourya, D.P., Panda, D., Kharaghani, A., Tsotsas, E., Gurugubelli, P.S., Surasani, V.K.: Lattice Boltzmann simulations for the drying of porous media with gas-side convection-diffusion boundary, Phys. Fluids, 35 (2023), 113324

    631. Kolan, S.R., Wang, R., Hoffmann, T., Tsotsas, E.: Mixing nanoparticles in a ProCell type spouted bed,  Powder Technol., 431 (2024), 119129

    632. S. Bhoi, Kolan, S.R., Bück, A., Tsotsas, E.: Population balance modeling of formation and breakage of nanoparticle agglomerates in a spouted bed, Powder Technol., 433 (2024), 119271 

    633. Wu, W., Chen, K., Tsotsas, E.: Prediction of particle mixing in rotary drums by a DEM data-driven PSO-SVR model, Powder Technol., 434 (2024), 119365

    634. Faridi, I.K., Tsotsas, E., Kharaghani, A.: Advancing process control in fluidized bed biomass gasification using model-based deep reinforcement learning, Processes, 12 (2024), 254

    635. Alkadhem, A.M., Mohamed, H.O., Kulkarni, S.R., Hoffmann, T., Zapater, D., Musteata, V.E., Tsotsas, E., Castano, P.: Shaping technical catalyst particles in a bottom-spray fluidized bed, Powder Technol., 438 (2024), 119602

    636. Chen, K., Li, Z., Akbas, S., Tsotsas, E.: Monte Carlo modeling of particle agglomeration during polymer pyrolysis in bubbling fluidized bed, Fuel, 367 (2024), 131487

Last Modification: 28.03.2024 - Contact Person: Webmaster