Zeitschriften- und Kongressbeiträge

  1. Tsotsas, E., Gogousis, A.: The field of heliostats of a 5 MWe central-tower solar power-plant, (in griechischer Sprache), Proceedings of the first national symposium of the Greek Society for Regenerative Energy Forms, Thessaloniki, Oktober 1982
  2. Tsotsas, E., Schlünder, E.-U.: Der Wärmeübergang durch enge Gasspalte - Ein zentrales Problem bei gekühlten Chipträgern in Hochleistungscomputern, Chem. Eng. Process., 18 (1984), 25-29
  3. Tsotsas, E., Schlünder, E.-U.: Die Kontakttrocknung rieselfähigen, polydispersen Granulats im Vakuum, Chem.-Ing.-Tech., 56 (1984), 844-846
  4. Tsotsas, E., Schlünder, E.-U.: Contact drying of mechanically agitated particulate material in the presence of inert gas, in A. S. Mujumdar (ed.), Drying `86, Proceedings of the 5th Intern. Drying Symposium, Cambridge / Massachusetts, Hemisphere, Washington 1986, vol. 1, sect. III, 157-168
  5. Tsotsas, E., Schlünder, E.-U.: Contact drying of mechanically agitated particulate material in the presence of inert gas, Chem. Eng. Process., 20 (1986), 277-285
  6. Tsotsas, E., Schlünder, E.-U.: Vacuum contact drying of free flowing mechanically agitated multigranular packings, Chem. Eng. Process., 20 (1986), 339-349
  7. Tsotsas, E., Schlünder, E.-U.: Contact drying of polydispersed free flowing granular material, in "Current research in heat and mass transfer  -- A Compendium and a Festschrift for Professor A. Ramachadran“, Hemisphere, Washington, 1986, 259-275
  8. Tsotsas, E., Schlünder, E.-U.: Heat transfer through narrow gas gaps: a crucial problem in cooled-chip supports in high-capacity computers, Int. Chem. Engng, 27 (1987), 34-39, (eingeladene englische Übersetzung)
  9. Tsotsas, E., Schlünder, E.-U.: Heat transfer during evaporation and condensation of binary mixtures, Chem. Eng. Process., 21 (1987), 209-215
  10. Tsotsas, E., Schlünder, E.-U.: Vacuum contact drying of mechanically agitated beds: The influence of hygroscopic behaviour on the drying rate curve, Chem. Eng. Process., 21 (1987), 199-208
  11. Tsotsas, E., Martin, H.: Thermal conductivity of packed beds: A review, Chem. Eng. Process., 22 (1987), 19-37
  12. Tsotsas, E., Schlünder, E.-U.: Some remarks on channeling and on radial dispersion in packed beds, Chem. Engng Sci., 43 (1988), 1200-1203
  13. Tsotsas, E., Schlünder, E.-U.: Contact resistance between rigid walls and particles and its importance on modeling heat transfer to fixed, moving, agitated and fluidized beds, Proceedings of the Eurotherm 4, Thermal transfer in composite materials and at solid-solid interface, 28. Juni - 01. Juli 1988, Nancy / France
  14. Tsotsas, E., Schlünder, E.-U.: On axial dispersion in packed beds with fluid flow, Chem. Eng. Process., 24 (1988), 15-31
  15. Tsotsas, E., Schlünder, E.-U.: Strömungsungleichverteilung und axiale Dispersion in Festbetten, Chem.-Ing.-Tech., 61 (1989), 243-246
  16. Tsotsas, E., Martin, H.: Wärmeübertragung zwischen einer Wand und dispersen Gas/Feststoff-Systemen, Chem.-Ing.-Tech., 61 (1989), 677-686
  17. Tsotsas, E., Schlünder, E.-U.: Heat transfer in packed beds with fluid flow: Remarks on the meaning and the calculation of a heat transfer coefficient at the wall, Chem. Engng Sci., 45 (1990), 819-839
  18. Tsotsas, E., Schlünder, E.-U.: The influence of tube to particle diameter ratio on pressure drop in packed tubes: Remarks on a recent paper by Chu and Ng, AIChE J., 36 (1990), 151-154
  19. Tsotsas, E., Schlünder, E.-U.: Measurements of mass transfer between particles and gas in packed tubes at very low tube to particle diameter ratios, Wärme- und Stoffübertragung, 25 (1990), 245-256
  20. Tsotsas, E., Schlünder, E.-U.: Numerical calculation of the thermal conductivity of two regular bidispersed beds of spherical particles,  Computers Chem. Engng, 14 (1990), 1031-1038
  21. Tsotsas, E.: Eine einfache empirische Gleichung zur Vorausberechung der Porosität polydisperser Kugelschüttungen, Chem.-Ing.-Tech., 63 (1991), 495-496
  22. Tsotsas, E., Schlünder, E.-U.: Impact of particle size dispersity on thermal conductivity of packed beds: Measurement, numerical simulation, prediction, Chem. Eng. Technol., 14 (1991), 421-427
  23. Tsotsas, E., Martin, H.: Heat transfer between a wall and gas-solid dispersed systems, Int. Chem. Engng, 31 (1991), 629-641, (eingeladene englische Übersetzung)
  24. Tsotsas, E.: Physiologische Aspekte der Wärmeübertragung, Fridericiana / Zeitschrift der Universität Karlsruhe, Heft 46 (1992), 35-43
  25. Tsotsas, E.: Transportvorgänge in Festbetten: Geschichte, Standpunkt und Perspektiven der Forschung, Chem.-Ing.-Tech., 64 (1992), 313-322
  26. Tsotsas, E.: On mass transfer, dispersion, and macroscopical flow maldistribution in packed tubes, Chem. Eng. Process., 31 (1992), 181-190
  27. Tsotsas, E.: Measurement and modelling of intraparticle drying kinetics: A review, in A. S. Mujumdar (ed.) Drying ´92, Proceedings of the 8th Intern. Drying Symposium, Montreal/Canada, Elsevier, Amsterdam 1992, 17-41
  28. Tsotsas, E.: Low Péclet number transient heat transfer in packed beds: Reevaluation of the data of Donnadieu, Chem. Engng Sci., 48 (1993), 3434-3437
  29. Tsotsas, E., Schlünder, E.-U.: Comment on studies on axial dispersion in fixed beds, Chem. Eng. Process., 33 (1994), 107-111
  30. Tsotsas, E.: From single particle to fluid bed drying kinetics, Drying Technology, 12 (1994), 1401-1426
  31. Tsotsas, E.: Discrimination of fluid bed models and investigation of particle-to-gas mass transfer by means of drying experiments, Chem. Eng. Process., 33 (1994), 237-245
  32. Tsotsas, E.: Wärmeübertragung in Festbetten, Preprints der Vortrags- und Diskussionstagung „Fortschritte in der Technik der Wärmeübertragung“, GVC-W, Baden-Baden, 29./30. Nov. 1994, Paper 11
  33. Tsotsas, E., Bellgardt, D.: Practical and theoretical aspects of fluid bed drying, Proc. Int. Symp. of Engng Foundation „Fluidization VIII“,  Tours/France, 1995, 1043-1050, als ausgewählter Beitrag auch in: Fluidization VIII, Large, J.-F., Laguérie, C. (eds), Engineering Foundation, New York, 1996, S. 519-526
  34. Groenewold, H., Tsotsas, E.: A new model for fluid bed drying, in C. Strumillo, Z. Pakowski (eds), Drying ´96, Proceedings of the 10th Intern. Drying Symposium, Krakow/Poland, Drukarnia Papaj, Lodz 1996, 315-322,  als ausgewählter Beitrag auch in Drying Technology, 15 (1997), 1687-1698
  35. Hirschmann, C., Tsotsas, E.: Einfluß der Porenstruktur auf den Stofftransport am Beispiel der Trocknung, Freiberger Forschungshefte, A849 (1998), 74-83
  36. Burgschweiger, J., Tsotsas, E.: A population balance model for fluidized bed drying, in C.B. Akritidis, D. Marinos-Kouris, G.D. Saravakos (eds), Drying ´98, Proceedings of the 11th Intern. Drying Symposium, Halkidiki/Greece, Ziti editions, Thessaloniki 1998, 134-141
  37. Hirschmann, C., Tsotsas, E.: Impact of pore structure on particle-side drying kinetics, in C.B. Akritidis, D. Marinos-Kouris, G.D. Saravakos (eds), Drying ´98, Proceedings of the 11th Intern. Drying Symposium, Halkidiki/Greece, Ziti editions, Thessaloniki 1998, 216-223
  38. Hirschmann, C., Fyhr, C., Tsotsas, E., Kemp, I.C.: Comparison of two basic methods for measuring drying curves: Thin layer method and drying channel, in C.B. Akritidis, D. Marinos-Kouris, G.D. Saravakos (eds), Drying ´98, Proceedings of the 11th Intern. Drying Symposium, Halkidiki/Greece, Ziti editions, Thessaloniki 1998, 224-231
  39. Groenewold, H., Tsotsas, E.: Predicting Sherwood numbers in fluidized beds, in C.B. Akritidis, D. Marinos-Kouris, G.D. Saravakos (eds), Drying ´98, Proceedings of the 11th Intern. Drying Symposium, Halkidiki/Greece, Ziti editions, Thessaloniki 1998, 192-199, als ausgewählter Beitrag auch in Drying Technology, 17 (1999), 1557-1570
  40. Groenewold, H., Tsotsas, E.: Heat transfer from a surface to wet fluidized particles during drying, in C.B. Akritidis, D. Marinos-Kouris, G.D. Saravakos (eds), Drying ´98, Proceedings of the 11th Intern. Drying Symposium, Halkidiki/Greece, Ziti editions, Thessaloniki 1998, 184-191
  41. Tsotsas, E.: Achievements, challenges and perspectives in modelling and design of convective dryers, in C.B. Akritidis, D. Marinos-Kouris, G.D. Saravakos (eds), Drying ´98, Proceedings of the 11th Intern. Drying Symposium, Halkidiki/Greece, Ziti editions, Thessaloniki 1998, 11-22
  42. Burgschweiger, J., Groenewold, H., Hirschmann, C., Tsotsas, E.: From hygroscopic single particle to batch fluidized bed drying kinetics, Can. J. Chem. Eng., 77 (1999), 333-341
  43. Winterberg, M., Tsotsas, E.: Das Nußelt-Graetz-Problem für gepackte Rohre, Transactions of the Tambov Technical University, 5 (1999), 68-82
  44. Burgschweiger, J., Wu, Y., Tsotsas, E., Döschner, C.: A process model for fluidized bed drying and its application for design and control, Proceedings of the 2nd European Congress of Chemical Engineering, Montpellier/Frankreich, Récents Progrès en Génie des Procédés, 13 (1999), No. 69, 153-160
  45. Winterberg, M., Krischke, A., Tsotsas, E., Vortmeyer, D.: On the invariability of transport parameters in packed beds upon catalytic reaction, Proceedings of the 2nd European Congress of Chemical Engineering, Montpellier/Frankreich, Récents Progrès en Génie des Procédés, 13 (1999), No. 65, 205-212
  46. Tsotsas, E.: Energetic optimization and product quality enhancement in solids processing: A dilemma?, Proceedings of the 6th Greek Conference of the Solar Technology Institute on the Optimization of Energy Processes, 03.-05. Nov. 1999, Volos/Greece (eingeladener Übersichtsbeitrag)
  47. Burgschweiger, J., Tsotsas, E.: Ein neues, schnelles Meßverfahren für Sorptionsisothermen - Anwendung auf Aktivtonerde, Chem.-Ing.-Tech., 72 (2000) 1 + 2, 88-94
  48. Winterberg, M., Tsotsas, E. , Krischke, A., Vortmeyer, D.: A simple and coherent set of coefficients for modelling of heat and mass transport with and without chemical reaction in tubes packed with spheres, Chem. Engng Sci., 55 (2000), 967-979
  49. Winterberg, M., Tsotsas, E.: Impact of tube-to-particle diameter ratio on pressure drop in packed beds, AIChE J., vol. 46 (2000), 1084-1088
  50. Winterberg, M., Tsotsas, E.: Modelling of heat transport in beds packed with spherical particles for various bed geometries and / or thermal boundary conditions, Int. J. Thermal Sci., 39 (2000), 556-570
  51. Tsotsas, E., Groenewold, H., Groenewold, C., Burgschweiger, J.: Static and dynamic models for drying in bubbling fluidized beds,  Proceedings of the 3rd European Conference on Fluidization, Toulouse/Frankreich, Récents Progrès en Génie des Procédés, 14 (2000), No. 75, 113-120
  52. Groenewold, H., Tsotsas, E.: Wall-to-bed heat transfer during fluidized bed drying, Proceedings of the 3rd European Conference on Fluidization, Toulouse/Frankreich, Récents Progrès en Génie des Procédés, 14 (2000), No. 75, 205-212
  53. Groenewold, H., Hirschmann, C., Burgschweiger, J., Tsotsas, E.: Comparison of convective drying kinetics of active and inactivated Al2O3,  Bulletin of the Polish Academy of Sciences, 48 (2000), No. 2, 369-382
  54. Groenewold, C., Möser, C., Groenewold, H., Tsotsas, E.: Determination of single particle drying kinetics in an acoustic levitator, in P.J.A.M. Kerkhof, W.J. Coumans, G.D. Mooiweer (eds), Proceedings of the 12th Intern. Drying Symposium, Noordwijkerhout/Netherlands, Elsevier 2000, Paper No. 58, als ausgewählter Beitrag auch in Chem. Eng. J., 86 (2002), 217-222
  55. Kaiser, S., Tsotsas, E.: Advoidance of fouling from dryer exhaust gases as a presupposition for efficient energy recovery – An experimental approach, in P.J.A.M. Kerkhof, W.J. Coumans, G.D. Mooiweer (eds), Proceedings of the 12th Intern. Drying Symposium, Noordwijkerhout/Netherlands, Elsevier 2000, Paper No. 55
  56. Groenewold, C., Groenewold, H., Tsotsas, E.: Interrelations between porous structure and convective drying kinetics in theory and experiment, in P.J.A.M. Kerkhof, W.J. Coumans, G.D. Mooiweer (eds), Proceedings of the 12th Intern. Drying Symposium, Noordwijkerhout/Netherlands, Elsevier 2000, Paper No. 59
  57. Groenewold, H., Tsotsas, E.: Experimental investigation and modelling of the influence of indirect heating on fluidized bed drying, in P.J.A.M. Kerkhof, W.J. Coumans, G.D. Mooiweer (eds), Proceedings of the 12th Intern. Drying Symposium, Noordwijkerhout/Netherlands, Elsevier 2000, Paper No. 39, als ausgewählter Beitrag auch in Drying Technology, 19 (2001), 1739-1754
  58. Schneider, M., Tsotsas, E.: Migration of residual moisture during the storage of particulates after drying, in P.J.A.M. Kerkhof, W.J. Coumans, G.D. Mooiweer (eds), Proceedings of the 12th Intern. Drying Symposium, Noordwijkerhout/Netherlands, Elsevier 2000, Paper No. 360
  59. Möser, C., Tsotsas, E.: Thermal effects during the desorption of ammonia from single drops, in E.W.P. Hahne, W. Heidemann, K. Spindler (eds), Proceedings of the 3rd European Thermal Sciences Conference, Heidelberg, Edizioni ETS, Pisa 2000, 1217-1222
  60. Post, S., Tsotsas, E.: Combined heat transfer, mass transfer and interface convection during evaporation of binary mixtures from planar gaps, in E.W.P. Hahne, W. Heidemann, K. Spindler (eds), Proceedings of the 3rd European Thermal Sciences Conference, Heidelberg, Edizioni ETS, Pisa 2000, 911-916
  61. Tsotsas, E.: Entwicklungsstand und Perspektiven der Modellierung von Transportvorgängen in durchströmten Festbetten, Chem.-Ing.-Tech., (72), 4, 2000, 313-321
  62. Winterberg, M., Tsotsas, E.: Correlations for effective transport coefficients in beds packed with cylindrical particles, Chem. Engng Sci., 55 (2000), 5937-5943
  63. Tsotsas, E.: Letter to the editor on „Experimental determination of transverse mixing kinetics in a rolling drum by image analysis“ by D.R. van Puyvelde, B.R. Young, M.A. Wilson and S.J. Smith (Powder Technology, 106 (1999), 183-191), Powder Technology, 114 (2001), 262-263
  64. Kemp, I.C., Fyhr, B.C., Laurent, S., Roques, M., Groenewold, C., Tsotsas, E., Sereno, A., Bonazzi, C., Bimbenet, J., Kind, M.: Methods for processing experimental drying kinetics data, Drying Technology, 19 (2001), 15-34
  65. Möser, C., Tsotsas, E.: Removal of ammonia from single water drops at normal and reduced pressure, Proceedings of the 3rd European Congress of Chemical Engineering, Nürnberg,  2001, Paper No. 459
  66. Beißner, H., Tsotsas, E.: Miscible displacement and diffusion during the removal of undesired liquids from porous bodies by washing,  Proceedings of the 3rd European Congress of Chemical Engineering, Nürnberg, 2001, Paper No. 436
  67. Post, S., Urukova, I., Tsotsas, E.: Microconvection during pervaporation of binary liquid mixture from planar gaps or packed layers,  Proceedings of the 3rd European Congress of Chemical Engineering, Nürnberg, 2001, Paper No. 446
  68. Kaiser, S., Tsotsas, E.: Formation of fouling layers and energy recovery from dryer exhaust gases, in O. Alvares-Filho, T.M. Eikerik, I. Strommen (eds), Proceedings of the 1st Nordic Drying Conference, Trondheim/Norway, 2001, Paper No. 16
  69. Schneider, M. Tsotsas, E.: On the predictability of silo rain: Modeling moisture migration in beds of particulates after drying, in O. Alvares-Filho, T.M. Eikerik, I. Strommen (eds), Proceedings of the 1st Nordic Drying Conference, Trondheim/Norway, 2001, Paper No. 15
  70. Groenewold, H., Tsotsas, E.: Experimental investigation of heat transfer from a cylinder to fluidized particles with a latent heat sink, in G.P. Celata, P. Di Marco, A. Goulas, A. Mariani (eds), Proceedings of the 5th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Thessaloniki/Greece, Edizioni ETS, Pisa 2001, 1717-1722
  71. Kaiser, S., Antonijevic, D., Tsotsas, E.: Formation of fouling layers on a heat exchanger element exposed to warm, humid and solids loaded air streams, in G.P. Celata, P. Di Marco, A. Goulas, A. Mariani (eds), Proceedings of the 5th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Thessaloniki/Greece, Edizioni ETS, Pisa 2001, 777-782, als ausgewählter Beitrag auch in Exper. Thermal and Fluid Sci., 26 (2002), 291-297
  72. Möser, C., Groenewold, C., Groenewold, H., Tsotsas, E.: Untersuchung der Kinetik von Trennprozessen im akustischen Levitator: Vor- und Nachteile, Chem.-Ing.-Tech., 73 (2001), 1012-1017
  73. Post, S., Tsotsas, E.: Analyse und Quantifizierung von während und aufgrund der Stoffübertragung eines binären Gemisches durch senkrechte Spalte induzierter Mikrokonvektion, Chem.-Ing.-Tech., 73 (2001), 1310-1314
  74. Tsotsas, E., Groenewold, H.: Combined convective and contact drying in fluidized beds, in C.W. Cao, X.D. Liu, Y.K. Pan, Y.X. Ou (eds), Proceedings of the 13th Intern. Drying Symposium, Beijing / China, 2002, Vol. A, 524-531
  75. Burgschweiger, J., Tsotsas, E.: Experimental investigation and modelling of continuous fluidized bed drying under steady-state and dynamic conditions, Chem. Engng Sci., 57 (2002), 5021-5038
  76. Tsotsas, E.: Product quality in drying – luck, trial, experience or science?, Proceedings of the 2nd Nordic Drying Conference (NDC’03), Kopenhagen/ Dänemark, 2003, Paper No. 76
  77. Peglow, M., Heinrich, S., Tsotsas, E., Mörl, L.: A generic model for investigating the influence of dispersion on fluidized bed evaporation and drying, Proceedings of the 2nd Nordic Drying Conference (NDC’03), Kopenhagen/ Dänemark, 2003, Paper No. 33
  78. Kache, G., Tsotsas, E., Evripidis, I.: Calculation of product temperature by short-cut tools for convective dryer design, Proceedings of the 2nd Nordic Drying Conference (NDC’03), Kopenhagen/ Dänemark, 2003, Paper No. 78
  79. Tsotsas, E.: Moderne Prozeß- und Produktgestaltung am Beispiel der Trocknung, Magdeburger Wissenschaftsjournal, 1,2 / 2003, 63-70
  80. Tsotsas, E.: Industrial convective drying: A unit operation on the way to process systems and product engineering, Proceedings of the European Drying Symposium (EU Drying 03), 2003, Kreta/ Griechenland, 15-27
  81. Stakic, M., Tsotsas, E.: Optimization of operational regimes for cross-flow grain dryers, Proceedings of the European Drying Symposium (EU Drying 03), 2003, Kreta/ Griechenland, 241-251
  82. Urukova, I., Post, S., Tsotsas, E.: Enhancement of mass transfer by microconvection during the evaporation of binary mixtures from porous layers, Proceedings of the 4th European Congress of Chemical Engineering (ECCE 4), 2003, Granada/Spanien, Paper No. P-7.1-012
  83. Kwapinski, W., Winterberg, M., Tsotsas, E.: Influence of flow maldistribution on packed bed adsorber performance, Proceedings of the 4th European Congress of Chemical Engineering (ECCE 4), 2003, Granada/Spanien, Paper No. P-5.5-007
  84. Silalahi, S.H.D., Hussain, A., Seidel-Morgenstern, A., Tsotsas, E.: Numerical and experimental investigation of heat transfer in the wall of membrane reactors, Proceedings of the 4th European Congress of Chemical Engineering (ECCE 4), 2003, Granada/Spanien, Paper No. O-5.2-004
  85. Hamel, C., Joshi, M., Tsotsas, E., Seidel-Morgenstern, A.: Aspects of describing stagewise dosing of reactants into fixed-bed and membrane reactors using 2D models, Proceedings of the 4th European Congress of Chemical Engineering (ECCE 4), 2003, Granada/Spanien, Paper No. P-7.2-049
  86. Heinrich, S., Peglow , M., Tsotsas, E., Mörl, L.: On the predictability of fluidized bed evaporation and drying: Analysis of mixing behaviour and transport phenomena, Proceedings of the 4th European Congress of Chemical Engineering (ECCE 4), 2003, Granada/Spanien, Paper No. P-8.4-018
  87. Salem, K., Mewes, D., Tsotsas, E.: Near infra-red tomography for concentration measurement of exhausting water vapour of a packed bed adsorber, Proceedings of the 3rd World Congress on Industrial Process Tomography, 2003, Banff/Canada, 199-206
  88. Beißner, H., Tsotsas, E.: Einfluss einer Gas-Flüssig-Grenzfläche auf die Waschkinetik poröser Stoffe bei Mischbarkeit von Beladungs- und Waschflüssigkeit, Transactions of the Tambov Technical University, 10 (2004), 101-113
  89. Kwapinski,W., Tsotsas, E.: Determination of drying or adsorption kinetics and equilibria on single particles by a magnetic suspension balance, Proceedings of the  4th European Thermal Sciences Conference, 2004, Birmingham/Großbritannien
  90. Hussain, A., Silalahi, S.H.D., Tsotsas, E.: Heat transfer in tubular, inorganic membranes, Proceedings of the 4th European Thermal Sciences Conference, 2004, Birmingham/Großbritannien
  91. Heinrich, S., Peglow, M., Tsotsas, E., Mörl, L.: Fluidized bed drying: Influence of dispersion and transport phenomena, in Silva, M.A., Rocha, S.C.S. (eds), Proceedings of the 14th International Drying Symposium, 2004, Sao Paulo/Brasilien, Vol. A, 129-136
  92. Kwapinski, W., Tsotsas, E.: Experimental determination of single-particle kinetics and equilibria for convective drying, desorption or adsorption by a magnetic suspension balance, in Silva, M.A., Rocha, S.C.S. (eds), Proceedings of the 14th International Drying Symposium, 2004, Sao Paulo/Brasilien, Vol. B, 1419-1426
  93. Stakic, M., Tsotsas, E.: Model-based analysis and optimization of convective grain drying process, in Silva, M.A., Rocha, S.C.S. (eds), Proceedings of the 14th International Drying Symposium, 2004, Sao Paulo/Brasilien, Vol. A, 381-388, als ausgewählter Beitrag auch in Drying Technology, 23 (2005), 1895-1908
  94. Metzger, T., Tsotsas, E.: Influence of pore distribution on drying kinetics: A simple capillary model, in Silva, M.A., Rocha, S.C.S. (eds), Proceedings of the 14th International Drying Symposium, 2004, Sao Paulo/Brasilien, Vol. A, 185-192, als ausgewählter Beitrag auch in Drying Technology, 23 (2005), 1797-1809
  95. Stakic, M., Tsotsas, E.: Modeling and numerical analysis of an atypical convective coal drying process, Drying Technology, 22 (2004), 2351-2373
  96. Kwapinski, W., Tsotsas, E.: Determination of kinetics and equilibria for adsorption of water vapour on single particles by a magnetic suspension balance, Chem. Eng. Technol., 27 (2004), 681-686
  97. Kwapinski, W., Winterberg, M., Tsotsas, E, Mewes, D.: Modelling of the wall effect in packed bed adsorption, Chem. Eng. Technol., 27 (2004), 1179-1186
  98. Salem, K., Kwapinski, W., Tsotsas, E., Mewes, D.: Tomographic investigation of the influence of wall effects on the breakthrough in a highly loaded packed bed adsorber, Proceedings of AIChE Annual Meeting, Austin/Texas, 2004
  99. Saage, G., Kapinska, M., Tsotsas, E.: Discrete element simulation of the mixing time of granular solids in rotary drums, in Y. Wang (ed.), Proceedings of the XIVth International Symposium on Trends in Applications of Mathematics to Mechanics (STAMM’2004), Seeheim/Germany, 2004
  100. Salem, K., Kwapinski, W., Tsotsas, E., Mewes, D.: Tomographic measurement of breakthrough in a packed bed adsorber, Chem. Engng Sci., 60 (2005), 517-522
  101. Tsotsas, E.: Modelling fluidized bed drying, in T.M. Eikevik, O. Alves-Filho, I. Strommen (eds), Proceedings of the 3rd Nordic Drying Conference (NDC ´05), Karlstad/Schweden, 2005
  102. Metzger, T., Irawan, A., Tsotsas, E.: Discrete modelling of drying kinetics of porous media, in T.M. Eikevik, O. Alves-Filho, I. Strommen (eds), Proceedings of the 3rd Nordic Drying Conference (NDC ´05), Karlstad/Schweden, 2005
  103. Drechsler, J., Peglow, M., Mörl, L., Stakic, M., Tsotsas, E.: Simulation of the steady state behaviour of granulation, agglomeration and drying units in a flow sheet simulation program, in T.M. Eikevik, O. Alves-Filho, I. Strommen (eds), Proceedings of the 3rd Nordic Drying Conference (NDC ´05), Karlstad/Schweden, 2005
  104. Irawan, A., Metzger, T., Tsotsas, E.: Pore network modelling of drying: Combination with a boundary layer model to capture the first drying period, Proceedings of the 7th World Congress of Chemical Engineering, Glasgow/Scotland, 2005, P42-033
  105. Metzger, T., Klotchov, A., Vergeldt, F., van As, H., Tsotsas, E.: Magnetic resonance imaging to monitor moisture profiles in a drying nano-porous sphere, Proceedings of the 7th World Congress of Chemical Engineering, Glasgow/Scotland, 2005, C14-004
  106. Saage, G., Kwapinska, M., Tsotsas, E.: An analysis of mixing in rotary drums by means of discrete element method and penetration model, in R. Garcia-Rajo, H.J. Herrmann, S. McNamara (eds), Proceedings of the 5th International Conference on the Micromechanics of Granular Media (“Powders and Grains”), Stuttgart/Germany, A.A. Balkema Publisher, Leiden 2005, Vol. B, 837-840
  107. Metzger, T., Kwapinska, M., Kwapinski, W., Peglow, M., Saage, G., Tsotsas, E.: New modelling and measuring methods in drying science and technology, in S.J. Kowalski (ed.), Proceedings of the XI Polish Drying Symposium, Poznan/Polen, 2005
  108. Kwapinski, W., Tsotsas, E.: Characterization of particulate materials in respect to drying, desorption or adsorption in packed bed, in S.J. Kowalski (ed.), Proceedings of the XI Polish Drying Symposium, Poznan/Polen, 2005
  109. Kwapinska, M., Saage, G., Tsotsas, E.: On the way from penetration models to discrete element simulations of contact dryers, in S.J. Kowalski (ed.), Proceedings of the XI Polish Drying Symposium, Poznan/Polen, 2005
  110. Post, S., Urukova, I., Tsotsas, E.: Interfacial convection during evaporation of binary mixtures from porous obstacles, AIChE J., 51 (2005), 3257-3274
  111. Kwapinska, M., Saage, G., Tsotsas, E.: Mixing of particles in rotary drums: A comparison of discrete element simulations with experimental results and penetration models for thermal processes, Powder Technol., 161 (2006), 69-78
  112. Schlünder, E.-U., Hampel, R., Peglow, M.: Vakuum-Schockgefriertrocknung und Trocknung wasserhaltiger poröser Partikel, Chem.-Ing.-Tech., 77 (2005), 1892-1899
  113. Metzger, T., Irawan, A., Tsotsas, E.: Remarks on the paper “Extension of Hoshen-Kopelman algorithm to non-lattice environments” by A. Al-Futaisi and T.W. Patzek, Physica A 321 (2003) 665-678, Physica A, 363 (2006), 558-560
  114. Peglow, M., Kumar, J., Warnecke, G., Heinrich, S., Tsotsas, E., Mörl, L., Hounslow, M.J.: An improved discretized tracer mass distribution of Hounslow et al., AIChE J., 52 (2006), 1326-1332
  115. Radichkov, R., Müller, T., Kienle A., Heinrich, S., Peglow, M., Mörl, L.: A numerical bifurcation analysis of continuous fluidized bed spray granulation with external product classification, Chem. Eng. Process., 45 (2006), 826-837
  116. Heinrich, S., Peglow, M., Mörl, L., Tsotsas, E.: Wirbelschichtforschung an der Universität Magdeburg, Mitteldeutsche Mitteilungen, 2006, Heft 2, 3-5
  117. Kwapinska, M., Saage, G., Peglow, M., Tsotsas, E.: Discrete modelling of contact heating of particles in rotating drum, Proceedings of the 5th World Congress on Particle Technology, 23.-27. April 2006, Orlando, Paper No. 163d
  118. Kettner, C., Peglow, M., Metzger, T., Tsotsas, E.: Distributed product quality by the example of moisture content of granular materials in a continuous fluidized bed dryer, Proceedings of the 5th World Congress on Particle Technology, 23.-27. April 2006, Orlando, Paper No. 163f
  119. Kumar, J., Peglow, M., Warnecke, G., Heinrich, S., Tsotsas, E., Mörl, L.: Numerical solutions of a two-dimensional population balance equation for aggregation, Proceedings of the 5th World Congress on Particle Technology, 23.-27. April 2006, Orlando, Paper No. 155c
  120. Peglow, M., Kumar, J., Heinrich, S., Tsotsas, E., Warnecke, G., Mörl, L.: A novel multi-dimensional population balance model incorporating particle size enlargement and drying behavior for fluidized bed spray granulation, Proceedings of the 5th World Congress on Particle Technology, 23.-27. April 2006, Orlando, Paper No. 70bx
  121. Link, J.M., Godlieb, W., Tripp, P. Deen, N.G., Heinrich, S., Peglow, M., Kumar, J., Kuipers, J.A.M., Schönherr, M., Mörl, L.: Comparison of fibre optical measurements and discrete element simulations for the study of granulation in a spouted fluidized bed, Proceedings of the 5th World Congress on Particle Technology, 23.-27. April 2006, Orlando, Paper No. 260a
  122. Radichkov, R., Müller, T., Kienle, A., Heinrich, S., Peglow, M., Mörl, L.: Numerical bifurcation analysis of the nonlinear dynamics in continuous fluidized bed spray granulation systems, Proceedings of the 5th World Congress on Particle Technology, 23.-27. April 2006, Orlando, Paper No. 240e
  123. Hampel, R., Heinrich, S., Mörl, L., Peglow, M.: Modelling and experimental analysis of superheated steam granulation, Proceedings of the 5th World Congress on Particle Technology, 23.-27. April 2006, Orlando, Paper No. 70au
  124. Hussain, A., Seidel-Morgenstern, A., Tsotsas, E.: Heat and mass transfer in tubular ceramic membranes for membrane reactors, Int. J. Heat Mass Transfer, 49 (2006), 2239–2253
  125. Peglow, M., Heinrich, S., Tsotsas, E.: Towards a complete population balance model for fluidized bed spray granulation: Simultaneous drying and particle formation, Glatt International Times, 22 (2006), 7-13
  126. Salem, K., Kwapinski, W., Tsotsas, E., Mewes, D.: Experimental and theoretical investigation of concentration and temperature profiles in a narrow packed bed adsorber, Chem. Eng. Technol., 29 (2006), 910-915
  127. Kwapinski, W., Tsotsas, E.: Characterization of particulate materials in respect to drying, Drying Technology, 24 (2006), 1083-1092
  128. Tsotsas, E., Kwapinska, M., Saage, G.: Modelling of contact dryers, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. A, 29-43
  129. Surasani, V.K., Metzger, T., Tsotsas, E.: Towards a complete pore network drying model: First steps to include heat transfer, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. A, 125-132
  130. Irawan, A., Metzger, T., Tsotsas, E.: Isothermal drying of pore networks: Influence of friction for different pore structures, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. A, 169-176
  131. Stakic, M., Tsotsas, E., Gai, S., Bauerschäfer, U.: Modelling of microwave aided desorption process within ceramic foams, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. A, 219-226
  132. Peglow, M., Kumar, J., Tsotsas, E., Heinrich, S., Warnecke, G., Mörl, L.: A population balance model for simultaneous drying and agglomeration, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. A, 265-272
  133. Vu, T.H., Metzger, T., Tsotsas, E.: Influence of pore size distribution via effective parameters in a continuous drying model, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. A, 554-560
  134. Kettner, C., Peglow, M., Metzger, T., Tsotsas, E.: Distributed product quality in fluidized bed drying, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. B, 745-750
  135. Suherman, Peglow, M., Tsotsas, E.: Drying kinetics of granular and powdery polymers, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. C, 1867-1874
  136. Link, J.M., Godlieb, W., Deen, N.G., Heinrich, S., Tripp, P., Peglow, M., Kuipers, J.A.M., Schönherr, M., Mörl, L.: Discrete element modeling and fibre optical measurements for fluidized bed spray granulation, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. A, 315-322
  137. Hampel, R., Heinrich, S., Peglow, M., Mörl, L.: Study of superheated steam granulation and drying in fluidized beds, Proceedings of the 15th International Drying Symposium, 20.-23. August 2006, Budapest, Vol. B, 649-655
  138. Gai, S., Enke, D., Tsotsas, E.: Selective heating of monolithic foam based catalysts and adsorbents by microwave energy, Proceedings of the 19th International Symposium on Chemical Reaction Engineering (ISCRE 19), 3.-6. September 2006, Potsdam, 645-646
  139. Hamel, C., Tota, A., Wang, H., Tablet, C., Caro, J., Tsotsas, E.: Modelling and simulation of a membrane reactor for the oxidation of methane with simultaneous steam reforming using O2-selective perowskite hollow fibres, Proceedings of the 19th International Symposium on Chemical Reaction Engineering (ISCRE 19), 3.-6. September 2006, Potsdam, 724-725
  140. Tota, A., Hamel, C., Klose, F., Tsotsas, E., Seidel-Morgenstern, A.: Enhancement of intermediate product selectivity in multi-stage reactors – potential and pitfalls, Proceedings of the 19th International Symposium on Chemical Reaction Engineering (ISCRE 19), 3.-6. September 2006, Potsdam, 738-739
  141. Groenewold, H., Tsotsas, E.: Drying in fluidized beds with immersed heating elements, Chem. Engng Sci., 62 (2007), 481-502
  142. Peglow, M., Kumar, J., Heinrich, S., Warnecke, G., Tsotsas, E., Mörl, L., Wolf, B.: A generic population balance model for simultaneous agglomeration and drying in fluidized beds, Chem. Engng Sci., 62 (2007), 513-532
  143. Metzger, T., Kwapinska, M., Peglow, M., Saage, G., Tsotsas, E.: Modern modelling methods in drying, Transport in Porous Media, 66 (2007), 103-120
  144. Nagaiah, C., Warnecke, G., Heinrich, S., Peglow, M.: Numerical simulation of temperature and concentration distributions in fluidized beds with liquid injection, Chem. Engng Sci., 62 (2007), 1567-1590
  145. Metzger, T., Irawan, A., Tsotsas, E.: Isothermal drying of pore networks: Influence of friction for different pore structures, Drying Technology, 25 (2007), 49-57
  146. Caro, J.,  Caspary, K.J. , Hamel, C.,  Hoting, B., Kölsch, P. Langanke, B., Nassauer, K., Schiestel, T. Schmidt, A., Schomäcker, R., Seidel-Morgenstern, A., Tsotsas, E., Voigt, I., Wang, H., Warsitz, R., Werth, S., Wolf, A.: Catalytic membrane reactors for partial oxidation using perovskite hollow fiber membranes and for partial hydrogenation using a catalytic membranecontactor, Ind. Eng. Chem. Res., 46 (2007), 2286-2294
  147. Testu, A., Didierjean, S., Maillet, D., Moyne, C., Metzger, T., Niass, T. : Thermal dispersion for water or air flow through a bed of glass beads, Int. J. Heat and Mass Transfer, 50 (2007), 1469-1484
  148. Brzic, D., Ahchieva, D., Peglow, M., Heinrich, S.: An experiemental study of the partial oxidation of ethane to ethylene in a shallow fluidized bed reactor, J. Serb. Chem. Soc.,72 (2007), 183-192
  149. Caro, J., Caspary, K.J., Hamel, C., Hoting, B., Kölsch, P., Langanke, B., Nassauer, K., Noack, M., Schiestel, T., Schroeder, M., Byun, Y.C., Seidel-Morgenstern, A., Tsotsas, E., Wang, H., Werth, S.: Perowskit-Hohlfasermembranen für die katalytische Partialoxidation von Methan zu Synthesegas, Chem.-Ing.-Tech., 79 (2007), 831-842
  150. Peglow, M., Kumar, J., Hampel, R., Tsotsas, E., Heinrich, S.: Towards a complete population balance model for fluidized-bed spray agglomeration,Drying Technology, 25 (2007), 1321-1329
  151. Tsotsas, E., Kwapinska, M., Saage, G.: Modeling of contact dryers, Drying Technology 25 (2007), 1377-1391
  152. Hampel, R., Peglow, M., Kumar, J., Tsotsas, E., Heinrich, S.: Study of agglomeration kinetics in fluidized beds referring to the moisture content of particles, Proceedings of the 3rd International Conference on Population Balance Modelling (PBM), 18.-21. September 2007, Québec/Kanada
  153. Peglow, M., Cunäus, U., Kettner, C., Metzger, T., Tsotsas, E.: A population balance approach for continuous fluidized bed dryers, Proceedings of the 3rd International Conference on Population Balance Modelling (PBM), 18.-21. September 2007, Québec/Kanada
  154. Avila-Acevedo, J.G., Tsotsas, E.: Transient natural convection in stored granular media, Proceedings of 6th European Congress of Chemical Engineering (ECCE-6), 16.-20. September 2007, Copenhagen, No. 848
  155. Metzger, T., Tsotsas, E.: Viscous stabilization of drying front: three-dimensional pore network simulations, Proceedings of 6th European Congress of Chemical Engineering (ECCE-6), 16.-20. September 2007, Copenhagen, No. 1925
  156. Suherman, Peglow, M., Tsotsas, E.: Drying kinetics of granular Nylon-6, Proceedings of 6th European Congress of Chemical Engineering (ECCE-6), 16.-20. September 2007, Copenhagen, No. 1937
  157. Surasani, V.K., Metzger, T., Tsotsas, E.: A non-isothermal pore network drying model: Influence of gravity, Proceedings of 6th European Congress of Chemical Engineering (ECCE-6), 16.-20. September 2007, Copenhagen, No. 2131
  158. Peglow, M., Cunäus, U., Kettner, C., Metzger, T., Tsotsas, E.: A population balance approach for continuous fluidized bed dryers, Proceedings of 6th European Congress of Chemical Engineering (ECCE-6), 16.-20. September 2007, Copenhagen, No. 2215
  159. Hamel, C., Tóta, A., Klose, F., Tsotsas, E., Seidel-Morgenstern, A.: Experimental and model based analysis of single und multi stage membrane reactors for the oxidation of short-chain hydrocarbons in a pilot scale, Proceedings of 6th European Congress of Chemical Engineering (ECCE-6), 16.-20. September 2007, Copenhagen, No. 3386
  160. Hamel, C., Wang, H., Caro, J., Tsotsas, E., Seidel-Morgenstern, A.: Simulation study of membrane supported oxidation of methane with simultaneous steam reforming using O2-selective Perowskite hollow fibres, Proceedings of 6th European Congress of Chemical Engineering (ECCE-6), 16.-20. September 2007, Copenhagen, No. 3412
  161. Peglow, M., Kettner, C., Metzger, T., Tsotsas, E.: Ein analytisches Populationsbilanzmodell für die kontinuierliche Wirbelschichttrocknung, Transactions of the Tambov Technical University, 13 (2007), 474-489
  162. Kumar, J., Peglow, M., Warnecke, G., Heinrich, S.: An efficient numerical technique for solving population balance equation involving aggregation, breakage, growth and nucleation, Powder Technology, 179 (2007), 205-228
  163. Hampel, R., Heinrich, S., Peglow, M., Mörl, L.: Modellierung und experimentelle Untersuchung der Wirbelschicht-Sprühgranulation im überhitzten Wasserdampf, Chem.-Ing.-Techn., 79 (2007), 82-90
  164. Metzger, T., Irawan, A., Tsotsas, E.: Influence of pore structure on drying kinetics: a pore network study, AIChE J., 53 (2007), 3029-3041
  165. Kwapinska M., Saage, G., Tsotsas, E.: Continuous versus discrete modelling of heat transfer to agitated beds, Powder Technology, 181 (2008), 331-342
  166. Suherman, Peglow, M., Tsotsas, E.: On the applicability of normalization for drying kinetics, Drying Technology, 26 (2008), 90-96
  167. Avila-Acevedo, J. G., Tsotsas, E.: Transient natural convection and heat transfer during the storage of granular media, Int. J. Heat Mass Transfer, 51 (2008), 3468-3477
  168. Hamel, C., Tota, A., Klose, F., Tsotsas, E., Seidel-Morgenstern, A.: Analysis of single and multi-stage membrane reactors for the oxidation of short-chain alkanes – Simulation study and pilot scale experiments, Chem. Eng. Res. Des., 86 (2008), 753-764
  169. Metzger, T., Tsotsas, E.: Pore network models for drying, Proceedings of 3rd International Scientific-Technical Conference on Energy-Saving Technologies for Drying and Hygro-Thermal Processing (DHTP), 16.-18. September 2008, Moskau, Vol. 1, 56-62
  170. Surasani, V., Metzger, T., Tsotsas, E.: Influence of heating mode on drying behavior of capillary porous media: pore scale modelling, Chemical Engineering Science, 63 (2008), 5218-5228
  171. Surasani, V., Metzger, T., Tsotsas, E.: Consideration of heat transfer in pore network modelling of convective drying, International Journal of Heat and Mass Transfer, 51 (2008), 2506-2518
  172. Metzger, T., Tsotsas, E.: Viscous stabilization of drying front: three-dimensional pore network simulations, Chemical Engineering Research and Design, 86 (2008), 739-744
  173. Metzger, T., Vorhauer, N., Tsotsas, E.: Use of pore networks for macroscopic modelling of drying, Proceedings of the 16th International Drying Symposium, 9.-12. November 2008, Hyderabad, Vol. A, 242-249
  174. Surasani, V.K., Metzger, T., Tsotsas, E.: Drying simulations of various 3D pore structures by a non-isothermal pore network model, Proceedings of the 16th International Drying Symposium, 9.-12. November 2008, Hyderabad, Vol. A, 356-364
  175. Kharaghani, R., Metzger, T., Tsotsas, E.: Mechanical effects during isothermal drying: A new discrete modelling approach, Proceedings of the 16th International Drying Symposium, 9.-12. November 2008, Hyderabad, Vol. A, 440-448
  176. Cunäus, U., Peglow, M., Tsotsas, E., Metzger, T.: Modelling of continuous fluidized bed drying using a population balance approach, Proceedings of the 16th International Drying Symposium, 9.-12. November 2008, Hyderabad, Vol. A, 456-462
  177. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Monte-Carlo simulation of agglomerate growth in fluidized bed spray drying, Proceedings of the 16th International Drying Symposium, 9.-12. November 2008, Hyderabad, Vol. A, 493-500
  178. Hampel, R., Peglow, M., Tsotsas, E., Heinrich, S.: Study of fluidized bed spray agglomeration focussing the moisture content of the solid, Proceedings of the 16th International Drying Symposium, 9.-12. November 2008, Hyderabad, Vol. B, 1052-1059
  179. Edreva, V., Zhang, F., Mangold, M., Tsotsas, E.: Mass transport in multilayer porous metallic membranes -- diagnosis, identification and validation, Chem. Eng. Technol., 32 (2009), 632-640
  180. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Stochastic simulation of agglomerate formation in fluidized bed spray drying: A micro-scale approach, Chemical Engineering Science, 64 (2009), 2631-2643
  181. Peglow, M., Tsotsas, E.: Discrete and continuous models to describe the kinetics of particle formation in fluidized beds, Proceedings of the 4th Nordic Drying Conference (NDC'09), Reykjavik/Island, 18.--19. Juni 2009
  182. Cunäus, U., Peglow, M., Tsotsas, E., Metzger, T.: Modeling of continuous fluidized bed drying using a population balances approach, Proceedings of the 4th Nordic Drying Conference (NDC'09), Reykjavik/Island, 18.--19. Juni 2009
  183. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Modelling of agglomerate grwoth in fluidized bed spray drying, Proceedings of the 9th International Symposium on Agglomeration and 4th International Granulation Workshop, 24.--06. Juni 2009, Sheffield/UK
  184. Sommer, A., Heinrich, S., Antonyuk, S., Peglow, M., Tsotsas, E.: Influence of process parameters on particle properties during fluidized bed granulation, Proceedings of the 9th International Symposium on Agglomeration and 4th International Granulation Workshop, 24.--06. Juni 2009, Sheffield/UK
  185. Weigler, F., Hoffmann, T., Naumann, M., Peglow, M., Tsotsas, E.: Experimental investigation of temperature distributions in bulk materials, Proceedings of the 7th World Conference on Experimental Heat Transfer, Fluid Mechanics, and Thermodynamics (ExHFT-7), Krakow/Polen, 28. Juni -- 3. Juli 2009, 2034-2046
  186. Iroba, K.L., Weigler, F., Mellmann, J., Metzger, T., Tsotsas, E.: Particle velocity profiles and residence time distribution in mixed-flow grain dryers, Proceedings of 6th International Conference for Conveying and Handling of Particulate Solids (CHoPS) and 10th International Conference on Bulk Materials Storage, Handling & Transportation (ICBMH) 3.--7. August 2009, Brisbane, Queensland/Australia, 79-84
  187. Kharagani, A., Metzger, T., Tsotsas, E.: Pore-scale modeling of drying-induced cracks, Proceedings of the 8th World Congress of Chemical Engineering (WCCE), 23.--27. August 2009, Montreal/Canada
  188. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Modeling of particle growth in fluidized bed spray agglomeration, Proceedings of the 8th World Congress of Chemical Engineering (WCCE), 23.--27. August 2009, Montreal/Canada
  189. Cunäus, U., Peglow, M., Tsotsas, E, Metzger, T.: Modeling of continuous fluidized bed drying using a population balance approach, Proceedings of the 8th World Congress of Chemical Engineering (WCCE), 23.--27. August 2009, Montreal/Canada
  190. Tsotsas, E.: Particle formulation by drying, Proceedings of the 8th World Congress of Chemical Engineering (WCCE), 23.--27. August 2009, Montreal/Canada
  191. Dernedde, M., Hampel, R., Peglow, M., Tsotsas, E.: Determination of agglomeration kinetics in fluidized beds, Proceedings of the 8th World Congress of Chemical Engineering (WCCE), 23.--27. August 2009, Montreal/Canada
  192. Tsotsas, E., Metzger, T., Peglow, M.: Models and tools for product engineering by drying, Proceedings of the 12th Polish Drying Symposium, 14.--16. September 2009, Lodz/Polen, 88-104
  193. Kirsch, C., Metzger, T., Tsotsas, E.: Towards a micro-scale simulation of convective gel drying, Proceedings of the 12th Polish Drying Symposium, 14.--16. September 2009, Lodz/Polen, 223-234
  194. Hussain, A., Seidel-Morgenstern, A., Tsotsas, E.: Influence of volumetric flow rate and temperature on mass transfer in composite ceramic membranes for membrane reactors, Canadian Journal of Pure & Applied Sciences, 3 (2009), 741-749
  195. Hussain, A., Seidel-Morgenstern, A., Tsotsas, E.: Effect of top layer´s material and flow direction on mass transfer through multi-layer ceramic membranes, Canadian Journal of Pure & Applied Sciences, 3 (2009), 993-1000
  196. Hussain, A., Seidel-Morgenstern, A., Tsotsas, E.: Influence of the multilayer nature of a composite membrane on mass transfer,
    Journal of Porous Media, 12 (2009), 749-757
  197. Hussain, A., Seidel-Morgenstern, A., Tsotsas, E.: General analysis of isobaric diffusion in composite ceramic membranes with inclusion of axial dispersion coefficient, Journal of Porous Media, 12 (2009), 955-966
  198. Surasani, V.K., Metzger, T., Tsotsas, E.: A non-isothermal pore network drying model with gravity effect, Transp. Porous Med., 80 (2009), 431-439
  199. Mangold, M., Bück, A., Hanke-Rauschenbach, R.: Passivity based control of a distributed PEM fuel cell model, Journal of Process Control, 20 (2010), 292-313
  200. Martin, P., Hamel, C., Ordóňez, S., Diez, F.V., Tsotsas, E., Seidel-Morgenstern, A.: Analysis of a fluidized bed membrane reactor for butane partial oxidation to maleic anhydride: 2D modeling, Chemical Engineering Science, 65 (2010), 3538-3548
  201. Mellmann, J., Iroba, K.L., Metzger, T., Tsotsas, E.: DEM-modelling of solids transport in mixed-flow dryers, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
  202. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Stochastic modelling of fluidized bed spray drying: Effect of particle porosity and bed temperature on agglomeration kinetics, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
  203. Börner, M., Peglow, M., van Buijtenen, M.S., Deen,m N.G., Tsotsas, E., Kuipers, J.A.M., Heinrich, S.: Residence times in fluidized bed granulation, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
  204. Fischer, C., Bück, A., Peglow, M., Tsotsas, E.: Fiber-optical inline measurement of particle size distributions in fluidized bed processes, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
  205. Dernedde, M., Bück, A., Peglow, M., Tsotsas, E.: Description of particle formation in fluized beds with a stochastic modelling method,
    Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
  206. Peglow, M., Tsotsas, E.: Kinetics of particle formation in fluidized beds: Modeling approaches and experimental methods, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
  207. Cunäus, U., Tsotsas, E., Peglow, M., Metzger, T.: Modelling of fluidized bed drying using population balance equations, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
  208. Hoffmann, T., Peglow, M., Tsotsas, E.: Dynamic behaviour of particle-size distribution in fluidized bed granulation, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
  209. Bück, A., Peglow, M., Tsotsas, E., Kienle, A.: Model-based measurement of PSDs in granulation processes, Proceedings of the 6th World Congress on Particle Technology, 26.-29. April 2010, Nürnberg
  210. Surasani, V., Metzger, T., Tsotsas, E.: Drying simulations of various 3D pore structures by a nonisothermal pore network model, Drying Technology 28 (2010), 615-623
  211. Metzger, T., Tsotsas, E.: Network models for capillary porous media: application to drying technology, Chem.-Ing.-Tech., 82 (2010), 869-879
  212. Avila-Acevedo, J.G., Tsotsas, E.: Moisture migration in stored granular materials, Proceedings of “Porous media and its applications in science, engineering, and industry”, 3rd International Conference, 20.-25. Juni 2010, Montecatini/Italy, 313-318
  213. Vorhauer, N., Metzger, T., Tsotsas, E.: Drying of porous media: A comparison of discrete and continuous models, Proceedings (CD-ROM) of “Porous media and its applications in science, engineering, and industry”, 3rd International Conference, 20.-25. Juni 2010, Montecatini/Italy
  214. Kharaghani, A., Metzger, T., Tsotsas, E.: Pore network modeling of mechanical effects during drying, Proceedings (CD-ROM) of “Porous media and its applications in science, engineering, and industry”, 3rd International Conference, 20.-25. Juni 2010, Montecatini/Italy
  215. Kirsch, C., Metzger, T., Tsotsas, E.: Modeling and simulation of convective drying of gels, Proceedings (CD-ROM) of “Porous media and its applications in science, engineering, and industry”, 3rd International Conference, 20.-25. Juni 2010, Montecatini/Italy
  216. Weigler, F., Peglow, M., Tsotsas, E.: Discrete investigation of thermal relaxation in packed beds, Proceedings (CD-ROM) of 14th International Heat Transfer Conference (IHTC14), 08.-13. August 2010, Washington/USA
  217. Bück, A., Peglow, M., Tsotsas, E., Mangold, M., Kienle, A.: Model-based measurement and control of particulate processes: an application to granulation processes, Proceedings (CD-ROM) of 19th International Congress of Chemical and Process Engineering (CHISA2010) and 7th European Congress of Chemical Engineering (ECCE-7), 28. August - 1. September 2010, Prag/Czech Republic
  218. Vorhauer, N., Metzger, T., Tsotsas, E.: Empirical macroscopic model for drying of porous media based on pore networks and scaling theory, Drying Technology, 28 (2010), 991-1000
  219. Kwapinski, W., Salem, K., Mewes, D., Tsotsas, E.: Thermal and flow effects during adsorption in conventional, diluted and annular packed beds, Chem. Eng. Sci., 68 (2010), 4250-4260
  220. Bück, A., Peglow, M., Naumann, M., Tsotsas, E.: Mathematical modelling and simulation of drying of a droplet with suspended particles, Proceedings of the 4th International Conference on Population Balance Modelling, 15.-17. September 2010, Berlin, 99-110
  221. Dernedde, M., Peglow, M., Tsotsas, E.: Probabilistic modeling of particle formation in fluidized bed spray granulation, Proceedings of the 4th International Conference on Population Balance Modelling, 15.-17. September 2010, Berlin, 99-110
  222. Kharaghani, A., Metzger, T., Tsotsas, E.: An irregular pore network model for convective drying of aggregates capillary and micro-mechanical effects, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 132-140
  223. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Experimental and theoretical investigation of drying effects on fluidized bed wet agglomeration, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 318-324
  224. Weigler, F., Peglow, M., Tsotsas, E.: Advances in discrete modeling of heat transfer in contact drying equipment, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 325-330
  225. Kirsch, C., Metzger, T., Tsotsas, E.: Micro-scale model for drying of highly porous particle aggregates, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 407-414
  226. Vorhauer, N., Metzger, T., Tsotsas, E.: Extraction of effective parameters for continuous drying model from discrete pore network model, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 415-422
  227. Cunäus, U., Peglow, M., Tsotsas, E.: Application of population balance equations for continuous fluidized bed drying, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 499-505
  228. Bück, A., Peglow, M., Tsotsas, E., Mangold, M., Kienle, A.: Model-based measurement and control of granulation processes, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 659-665
  229. Hoffmann, T., Peglow, M., Tsotsas, E.: Investigation of process dynamics in fluidized bed granulation, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 666-671
  230. Fischer, C., Bück, A., Peglow, M., Tsotsas, E.: Fibre-optical inline measurements of particle size distributions in fluidized bed processes, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 672-679
  231. Dernedde, M., Peglow, M., Tsotsas, E: Stochastic modeling of fluidized bed granulation, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 1120-1127
  232. Börner, M., Peglow, M., Tsotsas, E.: Particle residence times in fluidized bed granulation, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 1128-1134
  233. Naumann, M., Tsotsas, E., Peglow, M., Bück, A., Marchisio, D. L.: Modeling of particle formation from a single droplet containing micro or nano particles, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 1172-1177
  234. Mellmann, J., Iroba, K. L., Möller, B., Metzger, T., Tsotsas, E.: Moisture content and residence time distributions in mixed-flow grain dryers, Proceedings of the 17th International Drying Symposium (IDS2010), 3.-6. Oktober 2010, Magdeburg, 1995-2002
  235. Hoffmann, T., Hailu, B. A., Peglow, M., Tsotsas, E., Jacob, M.: Particle-gas mass transfer in a spouted bed with adjustable air inlet,
    Drying Technol., 29 (2011), 257-265
  236. Iroba, K.L., Mellmann, J., Weigler, F., Metzger, T., Tsotsas, E.: Particle velocity profiles and residence time distribution in mixed-flow grain dryers, Granular Matter, 13 (2011), 159-168
  237. Bück, A., Peglow, M., Tsotsas, E., Mangold, M., Kienle, A.: Model-based measurement of particle size distributions in layering granulation processes, AIChE J., 57 (2011), 929-941
  238. Dernedde, M., Peglow, M., Tsotsas, E.: Stochastische Modellierung der Partikelbildung in Wirbelschichten, Chem.-Ing.-Tech., 83 (2011), 665-671
  239. Hoffmann, T., Peglow, M., Tsotsas, E.: Prozessdynamik der Wirbelschichtgranulierung, Chem.-Ing.-Tech., 83 (2011), 658-664
  240. Peglow, M., Cunäus, U., Tsotsas, E.: An analytical solution population balance equations for continuous fluidized bed drying, Chem. Eng. Sci., 66 (2011), 1916-1922
  241. Börner, M., Peglow, M., Tsotsas, E.: Particle residence times in fluidized bed granulation equipments, Chem. Eng. Technol., 34 (2011), 1116-1122
  242. Dernedde, M., Peglow, M., Tsotsas, E.: Stochastic modelling of fluidized bed granulation: Influence of droplet pre-drying, Chem. Eng. Technol.; 34 (2011), 1172-1176
  243. Tsotsas, E.: Food drying as a challenge between process efficiency and product quality, Proceedings of the 11th International Congress on Engineering and Food (ICEF11), 22.-26. Mai 2011, Athens/Greece, Paper No. FPD1204
  244. Chávez-Montes, E., Peglow, M., Hampel, R., Mariano, J., Filliol, C., Gumy, J.-C.: An eye from industry on recent advances in fluid bed agglomeration of beverage powders, Proceedings of the 11th International Congress on Engineering and Food (ICEF11), 22.-26. Mai 2011, Athens/Greece, Paper No. FPE298
  245. Kharaghani, R., Metzger, T., Tsotsas, E.: A proposal for discrete modeling of mechanical effects during drying, combining pore networks with DEM, AIChE J., 57 (2011), 872-885
  246. Bück, A., Peglow, M., Tsotsas, E.: Model-based measurement and control of fluidised bed layering granulation processes, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 28
  247. Ivanova, N., Bück, A., Peglow, M., Tsotsas, E.: Continuous pellet coating for the pharmaceutical industry, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 33
  248. Wassermann, M., Weinholz, S., Ivanova, N., Cordes, C., Peglow, M., Pergande, W.: Granulation of lactic acid bacteria using fluidized bed technology, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 64
  249. Dernedde, M., Peglow, M., Tsotsas, E.: Simulation of fluidized bed spray agglomeration focussing on the pre-drying of droplets, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 79
  250. Hoffmann, T., Bachmann, P., Peglow, M., Tsotsas, E.: Investigation of growth kinetics in fluidised bed spray granulation, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 80
  251. Börner, M., Peglow, M., Tsotsas, E.: Application of experimental parameters in an extended PBM of a Wurster fluidized bed granulation, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 81
  252. Naumann, M., Peglow, M., Bück, A., Marchisio, D., Tsotsas, E.: Modeling of particle formation from a single nano suspension droplet, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 84
  253. Cháves-Montes, E., Peglow, M., Hampel, R., Mariano, J., Filliol, C., Gumy, J.-C.: Recent advances in fluid bed agglomeration of beverage powders, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 114
  254. Fischer, C., Peglow, M., Tsotsas, E.: Simulation of in-line particle sizing techniques during agglomeration processes, Proceedings of the 5th International Granulation Workshop, 20.-22. Juni 2011, Lausanne/Schweiz, Paper No. 116
  255. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Kinetics of fluidized bed spray agglomeration for compact and porous particles, Chem. Eng. Sci., 66 (2011), 1866-1878
  256. Peglow, M., Dernedde, M., Tsotsas, E.: Stochastic simulation of fluidized bed agglomeration, Proceedings of the 5th Nordic Drying Conference, 19.-21. Juni 2011, Helsinki/Finnland
  257. Iroba, K.L., Weigler, F., Mellmann, J., Metzger, T., Tsotsas, E.: Residence time distribution in mixed-flow grain dryers, Drying Technol., 29 (2011), 1252-1266
  258. Fischer, C., Peglow, M., Tsotsas, E.: Restoration of particle size distribution from fiber-optical in-line measurements in fluidized bed processes, Chem. Eng. Sci., 66 (2011), 2842-2852
  259. Wang, Y., Kharaghani, A., Metzger, T., Tsotsas, E.: Pore network drying model for particle aggregates: Assessment by x-ray microtomography, Proceedings of the 7th Asia-Pacific Drying Conference (ADC2011), 18.-20. September, Tianjin/China
  260. Kharaghani, A., Wang, Y., Kirsch, C., Metzger, T., Tsotsas, E.: Drying of highly porous particle aggregates: Pore-scale simulation and x-ray microtomography, Proceedings of the 7th Asia-Pacific Drying Conference (ADC2011), 18.-20. September, Tianjin/China
  261. Terrazas-Velarde, K., Peglow, M., Tsotsas, E.: Investigation of the kinetics of fluidized bed spray agglomeration based on stochastic methods, AIChE J., 57 (2011), 3012-3026
  262. Kharaghani, A., Kirsch, C., Metzger, T., Tsotsas, E.: Three-dimensional micro-scale model for convective gel drying,
    Proceedings of the 11th AIChE Annual Meeting, 16.-21. Oktober 2011, Minneapolis/USA
  263. Vorhauer, N., Metzger, T., Tsotsas, E.: On the influence of temperature gradients on drying of pore networks, Proceedings of the 3rd European Drying Conference (EuroDrying 2011), 26.-28. Oktober 2011, Palma de Mallorca/Spanien
  264. Tsotsas, E.: On the combination of particle formation and drying kinetics, Proceedings of the 3rd European Drying Conference (EuroDrying 2011), 26.-28. Oktober 2011, Palma de Mallorca/Spanien
  265. Wang, Y., Kharaghani, A., Metzger, T., Tsotsas, E.: Visualization of liquid in drying particle aggregates by x-ray microtomography and use of pore-scale modelling, Proceedings of the 3rd European Drying Conference (EuroDrying 2011), 26.-28. Oktober 2011, Palma de Mallorca/Spanien
  266. Surasani, V.K., Kretschmer, F., Heidecke, P., Peglow, M., Tsotsas, E.: Biomass combustion in a fluidized-bed system: An integrated model for dynamic plant simulations, Ind. Eng. Chem. Res., 50 (2011), 9936-9943
  267. Mellmann, J., Iroba, K.L., Metzger, T., Tsotsas, E., Farkas, I.: Moisture content and residence time distributions in mixed-flow grain dryers, Biosystems Engng., 109 (2011), 297-307
  268. Kharaghani, A., Metzger, T., Tsotsas, E.: An irregular pore network model for convective drying and resulting damage of particle aggregates, Chem. Eng. Sci., 75 (2012), 267-278
  269. Vorhauer, N., Metzger, T., Tsotsas, E., Prat, M.: Experimental investigation of drying by pore networks: Influence of pore size distribution and temperature, Proceedings of the 4th International Conference on Porous Media and its Applications in Science and Engineering ICPM4, 17.-22. Juni 2012, Potsdam
  270. Sun, Y., Kharaghani A., Metzger, T., Tsotsas, E., Müller, J..: Investigation of lotion distribution in wet wipes by pore network model and micro computed tomography, Proceedings of the 4th International Conference on Porous Media and its Applications in Science and Engineering ICPM4, 17.-22. Juni 2012, Potsdam
  271. Bück, A.,  Klaunick, G., Kumar, J., Peglow, M., Tsotsas, E.: Numerical simulation of particulate processes for control and estimation by spectral methods, AIChE J., 58 (2012), 2309-2319
  272. Palis, S., Bück, A., Kienle, A.: Low order controller design for continuous fluidized bed spray granulation with internal product classification by robust control methods, Proceedings of the 7th IFAC Symposium on Robust Control Design, 20.-22. Juni 2012, Aalborg/Denmark
  273. Tsotsas, E.: Influence of drying kinetics on particle formation: A personal perspective, Drying Technol., 30 (2012), 1167-1175
  274. Prat, M.,  Veran-Tissoires, S., Vorhauer, N., Metzger, T., Tsotsas, E.: Fractal phase distribution and drying: Impact on two-phase zone scaling and drying time scale dependence, Drying Technol., 30 (2012), 1129-1135
  275. Tsotsas, E., Pakowski, Z., Kudra, T., Devahastin, S.: Guest editorial: Special issue to commemorate 30 years of Drying Technology, Drying Technol., 30 (2012), 1125-1126
  276. Dadkhah, M., Peglow, M., Tsotsas, E.: Characterization of the internal morphology of agglomerates produced in a spray fluidized bed by X-ray tomography, Powder Technol., 228 (2012), 349-358
  277. Narni, N.R., Warnecke, G., Kumar, J., Peglow, M., Heinrich, S.: Some modelling aspects of aggregation kernels and the Aggregation Population Balance Equations, Proceedings of the International Conference on Eco-friendly Computing and Communication Systems (ICECCS), 9.-11. August 2012, Cochin, Kerala/Indien, 319-326
  278. Dadkhah, M., Peglow, M., Tsotsas, E.: Morphological characterization of spray fluidized bed agglomerates by using X-ray m-computed tomography, Proceedings of the International Conference on Mechanics of Nano, Micro and Macro composite structures, 18.-20. Juni 2012, Torino/Italy
  279. Mezhericher, M., Naumann, M., Peglow, M., Levy, A., Tsotsas, E., Borde, I.: Continuous species transport and population balance models for first drying stage of nanosuspension droplets, Chem. Eng. J., 210 (2012), 120-135
  280. Wang, Y., Kharaghani, A., Metzger, T., Tsotsas, E.: Pore network drying model for particle aggregates: Assessment by X-ray microtomography, Drying Technol., 30 (2012), 1800-1809
  281. Hoffmann, T., Peglow, M., Tsotsas, E.: Influence of process parameters on the particle surface structure in fluidized bed spray granulation, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
  282. Hampel, N., Bück, A., Peglow, M., Tsotsas, E.: Continuous pellet coating in a Wurster fluidized bed process, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
  283. Kharaghani, A., Kirsch, C., Tsotsas, E.: Influence of wetting properties on drying behavior of highly porous particle aggregates, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
  284. Sun, Y., Kharaghani, A., Tsotsas, E.: Modeling droplet evolution on a porous particle as micro-scale process in fluidized bed spray drying, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
  285. Wang, Y., Kharaghani, A., Tsotsas, E.: Pore-scale comparison of liquid distributions between pore network drying simulations and X-ray tomography, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
  286. Dadkhah, M., Peglow, M., Tsotsas, E.: Morphological characterization of fluidized bed spray drying agglomerates by X-ray tomography, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
  287. Dernedde, M., Peglow, M., Tsotsas, E.: Stochastic modeling of fluid bed agglomeration: Determination of particle moisture content, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
  288. Hussain, M., Peglow, M., Tsotsas, E.: Modeling the effect of process parameters in aggregation kernel of PBE using Monte-Carlo simulations, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
  289. Kharaghani, A., Anyamene, D., Tsotsas, E.: Direct imaging of convective drying process for single and dual cells of two-dimensional particle packings, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
  290. Bachmann, P., Peglow, M., Tsotsas, E.: Population balance modelling of moisture content distributions in semi-batch fluidized bed drying, Proceedings of the 18th International Drying Symposium (IDS2012), 11.-15. November 2012, Xiamen/China
  291. Dernedde, M., Peglow, E. Tsotsas, E.: A novel, structure-tracking monte carlo algorithm for spray fluidized bed agglomeration, AIChE J., 58 (2012), 3016-3029
  292. Bück, A., Peglow, M., Naumann, M., Tsotsas, E.: Population balance model for drying of droplets containing aggregating nanoparticles, AIChE J., 58 (2012), 3318-3328
  293. Hampel, N., Bück, A., Peglow, M., Tsotsas, E.: Continuous pellet coating in a Wurster fluidized bed process, Chem. Eng. Sci., 86 (2013), 87-98
  294. Kharaghani, A., Kirsch, C., Metzger, T., Tsotsas, E.: Micro-scale fluid model for drying of highly porous particle aggregates, Comp. Chem. Eng., 52 (2013), 46-54
  295. Börner, M., Peglow, M., Tsotsas, E.: Atomization characteristic into a top-spray fluidised bed obtained by an experimental and DEM-CFD approach, Proceedings of the International Congress on Particle Technology, PARTEC, 23.-25. April 2013, Nürnberg
  296. Dernedde, M., Peglow, M., Tsotsas, E.: Stochastic modelling of fluidised bed spray agglomeration focussing on the structure of particles, Proceedings of the International Congress on Particle Technology, PARTEC, 23.- 25. April 2013, Nürnberg
  297. Hoffmann, T., Peglow, M., Tsotsas, E.: Particle formation in fluidized bed spray granulation, Proceedings of the International Congress on Particle Technology, PARTEC, 23.-25. April 2013, Nürnberg
  298. Bück, A., Peglow, M., Tsotsas, E.: Control of particle properties in fluidised bed granulation processes, Proceedings of the International Congress on Particle Technology, PARTEC, 23.-25. April 2013, Nürnberg
  299. Kretschmer, F., Lemin, B., Bück, A., Peglow, M., Tsotsas, E.: Kinetic analysis of biomass combustion in fluidized beds, Proceedings of the International Congress on Particle Technology, PARTEC, 23.-25. April 2013, Nürnberg
  300. Kharaghani, A., Kirsch, C., Tsotsas, E.: Discrete three-dimensional model for drying particle aggregates, Proceedings of the International Congress on Particle Technology, PARTEC, 23.-25. April 2013, Nürnberg
  301. Vorhauer, N., Tran, Q. T., Metzger, T., Tsotsas, E., Prat, M.: Experimental investigation of drying in a model porous medium: Influence of thermal gradients, Drying Technol., 31 (2013), 920-929
  302. Börner, M., Peglow, M., Tsotsas, E.: Derivation of  parameters for a two compartment population balance model of Wurster fluidised bed granulation, Powder Technol., 238 (2013), 122-131
  303. Hussain, M., Kumar, J., Peglow, M., Tsotsas, E.: Simulating the spray fluidized bed granulation by modelling the aggregation efficiency, Proceedings of the 6th International Granulation Conference, 26.-28. Juni 2013, Sheffield/UK
  304. Bück, A., Palis, S., Tsotsas, E.: Based control of particle properties in fluidised bed spray granulation, Proceedings of the 6th International Granulation Conference, 26.-28. Juni 2013, Sheffield/UK
  305. Dadkhah, M., Peglow, M., Tsotsas, E.: Influence of process variables on particle morphology in spray fluidized bed agglomeration, Proceedings of the 6th International Granulation Conference, 26.-28. Juni 2013, Sheffield/UK
  306. Börner, M., Tsotsas, E.: Spray zone demarcation in top-spray fluidised bed granulation by droplet detection methods, Proceedings of the 6th International Granulation Conference, 26.-28. Juni 2013, Sheffield/UK
  307. Hussain, M., Kumar, J., Peglow, M., Tsotsas, E.: Modeling spray fluidized bed aggregation kinetics on the basis of Monte-Carlo simulation results, Chem. Eng. Sci., 101 (2013), 35-45
  308. Nagaiah, C., Kumar, N.S., Bück, A., Warnecke, G.: Parallel and high resolution numerical solution of concentration and temperature distribution in fluidized beds, Comp. Chem. Eng., 52 (2013), 122-133
  309. Hussain, M., Kumar, J., Peglow, M., Tsotsas, E.: Population balance modeling of  influencing parameters in spray fluidized bed granulation, Proceedings of the 5th International Conference on Population Balance Modeling, 11.-13. September 2013, Bangalore/Indien
  310. Bück, A., Hampel, N., Peglow, M., Tsotsas, E.:  Product control in pharmaceutical coating by population balance  modelling, Proceedings of the 5th International Conference on Population Balance Modeling, 11.-13. September 2013, Bangalore/Indien
  311. Wang, Y.J., Kharaghani, A., Tsotsas, E.: Pore-scale visualization and simulation of liquid films for drying particle packing, Proceedings of EuroDrying 2013, 02.-04. Oktober 2013, Paris/Frankreich
  312. Scaar, H., Franke, G., Weigler, F., Delele, M., Tsotsas, E., Mellmann, J.: Experimental study of the airflow distribution during mixed-flow grain drying, Proceedings of EuroDrying 2013, 02.-04. Oktober 2013, Paris/Frankreich
  313. Gadiel, C., Meininghaus, R., Quoll, M., Tsotsas, E.: Emissionen von Automobillackieranlagen – Ökobilanzielle Betrachtung der thermischen Nachverbrennung im Unterbodenschutz, Chem.-Ing.-Techn., 85 (2013), 1632-1637
  314. Dernedde, M., Peglow, M., Tsotsas, E: Stochastic modeling of fluidized bed agglomeration: Determination of particle moisture content,
    Drying Technol., 31 (2013), 1764-1771
  315. Hussain, M., Kumar, J., Peglow, M., Tsotsas, E.: On two-compartment population balance modelling of spray fluidized bed agglomeration, Computers and Chemical Engineering, 61 (2014), 185-202
  316. Bück, A., Tsotsas, E.: Modellbasierte Regelung der Partikelgrößenverteilung in der kontinuierlichen Wirbelschicht-Sprühgranulation,
    Chem.-Ing.-Techn., 86 (2014), 725-733
  317. Hagemeier, T., Glöckner, H., Roloff, C., Thévenin, D., Tomas, J.: Simulation of multi-stage particle classification in a zig-zag apparatus,
    Chem. Eng. Technol., 37 (2014), 879-887
  318. Hussain, M., Peglow, M., Tsotsas, E., Kumar, J.: Modeling of aggregation kernel using Monte Carlo simulations of spray fluidized bed agglomeration, AIChE J., 60 (2014), 855-868
  319. Dadkhah, M., Tsotsas, E.: Influence of process variables on internal particle structure in spray fluidized bed agglomeration,  Powder Technol., 258 (2014), 165-173
  320. Meyer, K., Bück, A., Tsotsas, E.: Dynamic modelling of particle formulation in horizontal fluidized beds, Proceedings of the 24th  European Symposium on Computer Aided Process Engineering, ESCAPE 24, 15.-18. Juni 2014, Budapest/Ungarn
  321. Narni, N.R., Peglow, M., Warnecke, G., Kumar, J., Heinrich, S., Kuipers, J.A.M.: Modeling of aggregation kernels for fluidized beds using discrete particle model simulations, Particuology 13 (2014), 134-144
  322. Tsotsas, E.: Multi-scale approaches to processes that combine drying with particle formation, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
  323. Wang, Y., Mahmood, H.T., Kharaghani, A., Tsotsas, E.: Visualization and modeling of liquid film rings observed during drying of particle packings, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
  324. Scaar, H., Weigler, F., Delele, M., Franke, G., Mellmann, J., Tsotsas, E.: Numerical modeling of mixed flow grain drying with CFD and DEM, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
  325. Rahimi, A., Kharaghani, A., Metzger, T., Tsotsas, E.: Pore network simulations to determine the influence of pore structure on wetting-drying kinetics of porous particles, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
  326. Vorhauer, N., Tsotsas, E., Prat, M.: Isothermal drying in the presence of capillary liquid films: Comparison of experiments with pore network simulations in a model system, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
  327. Tran, T.T.H., Terrazas-Velarde, K., Avila-Acevedo, J., Tsotsas, E.: Particle morphology as a means for investigating single droplet drying of dairy products, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
  328. Schmidt, M., Bück, A., Tsotsas, E.: Experimental investigation of continuous fluidized bed spray granulation with internal classification,
    Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
  329. Hoffmann, T., Schmidt, M., Rieck, C., Bück, A., Peglow, M., Tsotsas, E.: Influence of drying conditions on the product quality during continuous fluidized bed spray granulation, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
  330. Dadkhah, M., Peglow, M., Tsotsas, E.: Analysis of the influence of drying rate on spatial morphology of agglomerates, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
  331. Meyer, K., Bück, A., Tsotsas, E.:  Multi-zone model for layering granulation in horizontal fluidized beds, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
  332. Rieck, C., Bück, A., Tsotsas, E.: Monte Carlo modelling of particle coating in fluidized beds, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
  333. Sondej, F., Bück, A., Tsotsas, E.: Experimental analysis of the micro-structure of single particles and micro-droplets, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
  334. Bachmann, P., Tsotsas, E.: Minimization of particle dispersion in a continuous horizontal fluidized bed, Proceedings of the 19th  International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
  335. Casciatori, F.P., Bück, A., Thomeo, J.C., Tsotsas, E.: Two-phase model describing heat and water transfer during solid-state fermentation within a packed bed bioreactor, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
  336. Calin-Sanchez, A., Kharaghani, A., Lech, K., Figiel, A., Carbonell-Barrachina, A.A., Tsotsas, E.: Physical and sensory properties of chokeberry fruits dried with different methods, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
  337. Hagemeier, T., Bück, A., Tsotsas, E.: Characterization of particle dynamics in fluidized beds by means of particle tracking velocimetry, Proceedings of the 19th International Drying Symposium (IDS2014), 24.-27. August 2014, Lyon/Frankreich
  338. Casciatori, F.P., Bück, A., Tsotsas, E., Thoméo, J.: Coefficientes de interface para transferência de calor e água em bioreatores de fermentacão sólida, Proceedings of the XX Congresso Brasileiro de Engenharia Química, 19.-22. Oktober 2014,  Florianopolis/Brasilien
  339. Börner, M., Hagemeier, T., Ganzer, G., Peglow, M., Tsotsas, E.: Experimental spray zone characterization in top-spray fluidized bed granulation, Chem. Eng. Sci., 116 (2014), 317-330
  340. Dadkhah, M., Tsotsas, E.: Study of the morphology of solidified binder in spray fluidized bed agglomerate by X-ray tomography, Powder Technol., 264 (2014), 256-264
  341. Rieck, C., Hoffmann, T., Bück, A., Peglow, M., Tsotsas, E.: Influence of drying conditions on layer in fluidized bed spray granulation, Powder Technol., 272 (2015), 120-131
  342. Bück, A., Palis, S., Tsotsas, E.: Model-based control of particle properties in fluidized bed spray granulation, Powder Technol., 270 (2015), 575-583
  343. Ashraf, A., Börner, M., Peglow, M., Janiga, G., Seidel-Morgenstern, A., Thévenin, D.: Coupled computational fluid dynamics - discrete element method simulations of a pilot-scale batch crystallizer, Cryt. Growth Des., 15 (2015), 145-155
  344. Calin-Sanchez, A., Kharaghani, A., Lech, K., Figiel, A., Carbonell-Barrachina, A., Tsotsas, E.: Drying kinetics and microstructural and sensory properties of black chokeberry (aronia melanocarpa) as affected by drying method, Food Bioprocess Technol., 8 (2015), 63-74
  345. Schmidt, M., Bück, A., Tsotsas, E.: Experimental investigation of process stability of continuous spray fluidized bed layering with internal separation, Chem. Eng. Sci., 126 (2015), 55-66
  346. Sondej, F., Bück, A., Koslowsky, K., Bachmann, P., Jacob, M., Tsotsas, E.: Investigation of coating layer morphology by micro-computed X-ray tomography, Powder Technol., 273 (2015), 165-175
  347. Hussain, M., Kumar, J., Tsotsas, E.: Modeling aggregation kinetics of fluidized bed spray agglomeration for porous particles, Powder Technol., 270 (2015), 584-591
  348. Rieck, C., Bück, A., Tsotsas, E.:  Modeling of layering growth processes using a Monte Carlo Approach, Proceedings of the 8th International Conference on Mathematical Modelling (MATHMOD 2015), 18. Februar - 20. Februar 2015, Wien
  349. Mehakpreet, S., Kumar, J., Bück, A.: A volume conserving discrete formulation of aggregation population balance equations on non-uniform meshes, Proceedings of the 8th International Conference on Mathematical Modelling (MATHMOD 2015), 18. Februar - 20. Februar 2015, Wien
  350. Sun, Y., Kharaghani, A., Metzger, T., Müller, J., Tsotsas, E.: Lotion distribution in wet wipes investigated by pore network simulation and X-ray micro tomography, Transp. Porous Med., 107 (2015), 449-468
  351. Hagemeier, T., Börner, M., Bück, A., Tsotsas, E.: A comparative study on optical techniques for the estimation of granular flow velocities, Chem. Eng. Sci., 131 (2015), 63-75
  352. Hussain, M., Kumar, J., Tsotsas, E.: A new framework for population balance modeling of spray fluidized bed agglomeration, Particuology, 19 (2015), 141-154
  353. Bück, A., Casciatori, F.P., Thoméo, J.C., Tsotsas, E.:  Model-based control of enzyme yield in solid state fermentation, Proc. Eng. 102 (2015), 362-371
  354. Hoffmann, T., Rieck, C., Bück, A., Peglow, M., Tsotsas, E.: Influence of granule porosity during fluidized bed spray granulation, Proc. Eng. 102 (2015), 458-467
  355. Schmidt, M., Bück, A., Tsotsas, E.: Experimental investigation of the continuous fluidized bed spray granulation with internal classification, Proc. Eng. 102 (2015), 565-574
  356. Bachmann, P., Tsotsas, E.: Analysis of RTD data of a horizontal fluidized bed, Proc. Eng. 102 (2015), 790-798
  357. Hagemeier, T., Bück, A., Tsotsas, E.: Estimation of particle rotation in fluidized beds by means of PTV, Proc. Eng. 102 (2015), 841-849
  358. Rieck, C., Bück, A., Tsotsas, E.: Stochastic modelling of particle coating in fluidized beds, Proc. Eng. 102 (2015), 996-1005
  359. Hussain, M., Kumar, J., Tsotsas, E.: A new approach in population  balance modeling of spray fluidized bed agglomeration, Proc. Eng. 102 (2015), 1399-1407
  360. Meyer, K., Bück, A., Tsotsas, E.: Dynamic multi-zone population balance model of particle formulation in fluidized bed, Proc. Eng. 102 (2015), 1456-1465
  361. Jaskulski, M., Tran, T.T.H., Avila-Acevedo, J.G., Tsotsas, E.: Experimental determination of dring kinetics of skim-milk suspended droplet, Proceedings of the Nordic Baltic Drying Conference (NBDC 2015), 17.-19. Juni 2015, Gdańsk/Polen
  362. Tran, T.T.H., Jaskulski, M., Peglow, M., Avila-Acevedo, J.G., Tsotsas, E.: A new validated model for single droplet drying process,  Proceedings of the Nordic Baltic Drying Conference (NBDC 2015), 17.-19. Juni 2015, Gdańsk/Polen
  363. Rahimi, A., Kharaghani, A., Metzger, T., Tsotsas, E.: Pore network model for drying of salt solutions: Solute migration and crystallization, Proceedings of the Nordic Baltic Drying Conference (NBDC 2015), 17.-19. Juni 2015, Gdańsk/Polen
  364. Hagemeier, H., Jiang, Z., Bück, A., Tsotsas, E.: Discrete analysis of particle collision behavior in fluidized beds, Proceedings of the 7th International Granulation Workshop, 1.-3. Juli 2015, Sheffield/England
  365. Sondej, F., Bück, A., Tsotsas, E.: Experimental analysis of the microstructure of single particles, Proceedings of the 7th International Granulation Workshop, 1.-3. Juli 2015, Sheffield/England
  366. Saha, J., Kumar., J., Bück, A., Tsotsas, E.: Finite volume approximations of population balance equations, Proceedings of the 7th International Granulation Workshop, 1.-3. Juli 2015, Sheffield/England
  367. Pashminehazar, R., Kharaghani, A., Tsotsas, E.: Micro-structure of maltodextrin agglomerates produced by fluidized bed, Proceedings of the 7th International Granulation Workshop, 1.-3. Juli 2015, Sheffield/England
  368. Bück, A., Neugebauer, C., Meyer, K., Palis, S., Diez, E. Kienle, A., Heinrich, S., Tsotsas, E.: Influence of nozzle configuration on process stability of continuous fluidized bed layering with external classification, Proceedings of the 7th International Granulation Workshop, 1.-3. Juli 2015, Sheffield/England
  369. Mielke, L., Hoffmann,T., Peglow, M., Henneberg, M., Bück, A., Tsotsas, E.: Reduction of energy consumption in batch fluidized bed layering granulation processes by temporal separation, Proceedings of the 7th International Granulation Workshop, 1.-3. Juli 2015, Sheffield/England
  370. Rieck, C., Bück, A., Tsotsas, E.: Stochastic modeling of layering growth processes in fluidized beds, Proceedings of the 7th International Granulation Workshop, 1.-3. Juli 2015, Sheffield/England
  371. Schmidt, M., Rieck, C., Bück, A., Tsotsas, E.: Experimental investigation of process stability of continuous spray fluidized bed layering with external product separation, Chem. Eng. Sci., 137 (2015), 466-475
  372. Kumar, J., Saha, J., Tsotsas, E.: Development and convergence analysis of a finite volume scheme for solving breakage equation,
    SIAM J. Numer. Anal., 53-4 (2015), 1672-1689
  373. Hagemeier, T., Roloff, C., Bück, A., Tsotsas, E.: Estimation of particle dynamics in 2-D fluidized beds using particle tracking velocimetry,
    Particuology, 22 (2015), 39-51
  374. Khalloufi, S., Kharaghani, A., Almeida-Rivera, C., Nijsse, J., v. Dalen, G., Tsotsas, E.: Monitoring of initial porosity and new pores formation during drying: A scientific debate and a technical challenge, Trends in Food Sci. Technol., 45 (2015), 179-186
  375. Idakiev, V., Marx, S., Roßau, A., Bück, A., Tsotsas, E., Mörl, L.: Inductive heating of fluidized beds: Influence on fluidization behavior,
    Powder Technol., 286 (2015), 90-97
  376. Hoffmann, T., Rieck, C., Schmidt, M., Bück, A., Peglow, M., Tsotsas, E.: Prediction of shell porosities in continuous fluidized bed spray layering, Drying Technol., 33 (2015), 1662-1670
  377. Vorhauer, N., Wang, Y.J., Kharaghani, A., Tsotsas, E., Prat, M.: Drying with formation of capillary rings in a model porous media, Transp. Porous Med., 110 (2015), 197-223
  378. Rahimi, A., Kharaghani, A., Metzger, T., Tsotsas, E.:  Pore network simulations of salt crystalization in drying porous media, Proceedings of the 5th European Drying Conference (EuroDrying 2015), 21.-23. Oktober 2015, Budapest/Hungary
  379. Le, K.H., Kharaghani, A., Tsotsas, E.: Pore network simulation of heat and mass transfer in superheated steam drying, Proceedings of the 5th European Drying Conference (EuroDrying 2015), 21.-23. Oktober 2015, Budapest/Hungary
  380. Jaskulski, M., Tran, T.T.H., Avila-Acevedo, J.G., Tsotsas; E.: An advanced modeling and experimental validation of single droplets drying process,  Proceedings of the 29th EFFoST Conference, 10.-12. November 2015, Athens, Greece
  381. Tsotsas, E.: Multiscale approaches to processes that combine drying  with particle formation, Drying Technol., 33  (2015), 1859-1871
  382. Dreyschultze, C., Neugebauer, C., Palis, S., Bück, A., Tsotsas, E., Heinrich, S., Kienle, A.: Influence of zone formation on stability of continuous fluidized bed layering granulation with external product classification, Particuology, 23 (2015), 1-7
  383. Mirdrikvand, M., Imani Moqadam, S., Kharaghani, A., Roozbehani, B., Jadidi, N.: Optimization of a pilot-scale amine scrubber to remove SO2: higher selectivity and lower solvent consumption, Chem. Eng. Technol., 39 (2015), 246-254
  384. Imani Moqadam, S., Mirdrikvand, M., Roozbehani, B., Kharaghani, A., Shishehsaz, M.R.: Polystyrene pyrolysis using silica-alumina  catalyst in fluidized bed reactor, Clean Techn. Environ. Policy, 17 (2015), 1847-1860
  385. Wu, R., Kharaghani, A., Tsotsas, E.: Two-phase flow with capillary valve effect in porous media, Chem. Eng. Sci., 139 (2016), 241-248
  386. Zarekar, S., Bück, A., Jacob, M., Tsotsas, E.: Reconsideration of the hydrodynamic behavior of fluidized beds operated under reduced pressure, Powder Technol., 287 (2016), 169-176
  387. Sondej, F., Bück, A., Tsotsas, E.: Comparative analysis of the coating thickness on single particles using X-ray micro-computed  tomography and confocal laser-scanning microscopy, Powder Technol., 287 (2016), 330-340
  388. Casciatori, F.P., Bück, A., Thoméo, J., Tsotsas, E.: Two phase and two-dimensional model describing heat and water transfer during solid-state fermentation within a packed-bed bioreactor, Chem. Eng. J., 287 (2016), 103-116
  389. Scaar, H., Franke, G., Weigler, F., Delele, M., Tsotsas, E., Mellmann, J.: Experimental and numerical study of the airflow distribution in mixed-flow grain dryers, Drying Technol., 34  (2016), 595-607
  390. Pashminehazar, R., Kharaghani, A., Tsotsas, E.: Development of 3D morphological descriptors for agglomerates with complex structures, Proceedings of the 6th Conference on Industrial Computed Tomography, 9.-12. Februar 2016, Wels, Österreich
  391. Sondej, F., Rieck, C., Schmidt, M., Bück, A., Tsotsas, E.: Use of X-ray micro-computed tomography in pharmaceuticals and food industry, Proceedings of the Conference on Industrial Computed Tomography, 9.-12. Februar 2016, Wels, Österreich
  392. Wu, R., Kharaghani, A., Tsotsas, E.: Capillary valve effect during slow drying of porous media, Int. J. Heat Mass Transfer, 94 (2016), 81-86
  393. Le, K.H., Kharaghani, A., Tsotsas, E.: Pore network simulations of superheated steam drying, Proceedings of the International Congress on Particle Technology, PARTEC, 19.-21. April 2016, Nürnberg
  394. Pashminehazar, R., Kharaghani, A., Tsotsas, E.: Influence of process conditions on the morphology of maltodextrin agglomerates investigated by 3D X-ray images, Proceedings of the International Congress on Particle Technology, PARTEC, 19.-21. April 2016, Nürnberg
  395. Bück, A., Schmidt, M., Tsotsas, E.: Process control of continuous fluidised bed layering with internal product classification by MPC, Proceedings of the International Congress on Particle Technology, PARTEC, 19.-21. April 2016, Nürnberg
  396. Zarekar, S., Bück, A., Jacob, M., Tsotsas, E.: CFD simulation of the hydrodynamics of fluidized beds operated under reduced pressure,
    Proceedings of the International Congress on Particle Technology, PARTEC, 19.-21. April 2016, Nürnberg
  397. Palis, S., Neugebauer, C., Bück, A., Heinrich , S., Tsotsas , E., Kienle, A.: Control of multi-chamber continuous fluidized bed spray granulation, Proceedings of the International Congress on Particle Technology, PARTEC, 19.-21. April 2016, Nürnberg
  398. Sondej, F., Bück, A., Tsotsas, E.: Investigation of the microstructure of single particles using μ-computed tomography and confocal microscopy, Proceedings of the International Congress on Particle Technology, PARTEC, 19.-21. April 2016, Nürnberg
  399. Mielke, L., Hoffmann, T., Bück, A., Tsotsas, E., Henneberg, M., Peglow, M.: Process intensification of batch fluidized bed layering granulation processes by temporal separation of sub-processes, Proceedings of the International Congress on Particle Technology, PARTEC, 19.-21. April 2016, Nürnberg
  400. Schmidt, M., Bück, A., Tsotsas, E.: Spray fluidized bed agglomeration of amorphous food powders, Proceedings of the International Congress on Particle Technology, PARTEC, 19.-21. April 2016, Nürnberg
  401. Jiang, Z., Hagemeier, T., Bück, A., Tsotsas, E.: Particle dynamics and mixing behavior in a poly-disperse gas-solid fluidized bed by color-PTV measurements, Proceedings of the International Congress on Particle Technology, PARTEC, 19.-21. April 2016, Nürnberg
  402. Idiakiev, V., Bück, A., Tsotsas, E., Mörl, L.: Modellbasierte Untersuchung des Wärmeübergangs in einer induktiv beheizten Wirbelschicht, Chem.-Ing.-Techn., 88 (2016), 656-665
  403. Sun, Y., Kharaghani, A., Tsotsas, E.: Micro-model experiments and pore network simulations of liquid imbibition in porous media,
    Chem. Eng. Sci., 150 (2016), 41-53
  404. Kumar, J., Kaur, G., Tsotsas, E.: An accurate and efficient discrete formulation of aggregation population balance equation, Kinetic and Related Models, 9 (2016), 373-391
  405. Rahimi, A., Metzger, T., Kharaghani, A., Tsotsas, E.: Interaction of droplets with porous structures: Pore network simulation of wetting and drying, Drying Technol., 34 (2016), 1129-1140
  406. Singh, M., Kumar, J., Bück, A., Tsotsas, E.: A volume-consistent discrete formulation of aggregation population balance equations,
    Math. Meth. Appl. Sci., 39 (2016), 2275-2286
  407. Saha, J., Kumar, J., Bück, A., Tsotsas, E.: Finite volume approximations of breakage population balance equation, Chem. Eng. Res. Des. 110 (2016), 114-122
  408. Rieck, C., Bück, A.: Mathematische Modellierung der Partikelformulierung in Trommelgranulatoren, Chem.-Ing.-Tech. 88 (2016), 841-849
  409. Rieck, C., Bück, A., Tsotsas, E.: Monte Carlo modeling of fluidized bed coating and layering processes, AIChE J., 62 (2016), 2670-2680
  410. Tran, T.T.H., Avila-Acevedo, J.G., Tsotsas, E.: Enhanced methods for experimental investigation of single droplet drying kinetics and application to lactose/water, Drying Technol., 34 (2016), 1185-1195
  411. Mielke, L., Hoffmann, T., Henneberg, M., Peglow, M., Bück, A., Tsotsas, E.: Reduction of energy consumption in batch fluidized bed layering granulation processes by temporal separation, Chem. Eng. Res. Des., 110 (2016), 2-11
  412. Singh, M., Kumar, J., Bück, A., Tsotsas, E.: An improved and efficient finite volume scheme for bivariate aggregation population balance equation, J. Comp. Appl. Math., 308 (2016), 83-97
  413. Bück, A., Dürr, R., Schmidt, M., Tsotsas, E.: Model predictive control of continuous layering granulation in fluidised beds with internal product classification, Journal of Process Control, 45 (2016), 65-75
  414. Idakiev, V., Bück, A., Tsotsas, E., Mörl, L.: Modellbasierte Berechnung des Benetzungsgrades in einer zylindrischen Wirbelschicht mit Flüssigkeitseindüsung, Chem.-Ing.-Tech., 88 (2016), 1109-1118
  415. Neugebauer, C., Palis, S., Bück, A., Diez, E., Heinrich, S., Tsotsas, E., Kienle, A.: Influence of mill characteristics on stability of continuous layering, granulation with external product classification, Proceedings of the 26th European Symposium on Computer Aided Process Engineering, ESCAPE, 12.-15. Juni 2016, Portorož/Slovenia
  416. Bück, A, Wegner, M., Neugebauer, C., Palis, S., Tsotsas, E.: Bifurcation analysis of process stability of continuous fluidized bed agglomeration with external product classification, Proceedings of the 26th European Symposium on Computer Aided Process Engineering, ESCAPE, 12.-15. Juni 2016, Portorož/Slovenia
  417. Bück, A., Neugebauer, C., Meyer, K., Palis, S., Diez, E., Kienle, A., Heinrich, S., Tsotsas, E.: Influence of operation parameters on process stability in continuous fluidised bed layering with external product classification, Powder Technol., 300 (2016), 37-45
  418. Moghaddam, A.A., Kharaghani, A., Tsotsas, E., Prat, M.: Equivalence of the one-dimensional moisture diffusion model and the three-dimensional pore network drying model, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
  419. Zarekar, S., Bück, A., Jacob, M., Tsotsas, E.: Model for drying and inactivation of baker’s yeast particles in fluidized beds operated under reduced pressure, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
  420. Le, K.H., Kharaghani, A., Kirsch, C., Tsotsas, E.: Discrete pore network modeling of superheated steam drying, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
  421. Rahimi, A., Kharaghani, A., Metzger, T., Tsotsas, E.: Pore network modelling of a salt solution droplet on a porous substrate: Imbibition, evaporation and crystallization, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
  422. Jiang, Z., Bück, A., Hagemeier, T., Tsotsas, E.: CFD-DEM study of residence time and collision velocity in a binary Wurster fluidized bed, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
  423. Tran, T.T.H., Jaskulski, M., Kharaghani, A., Tsotsas, E.: Reduction of a model for single droplet drying and application for CFD spray drying simulation, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
  424. Rieck, C., Bück, A., Tsotsas, E.: Monte-Carlo modeling of binder-less agglomeration in fluidized beds, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
  425. Müller, D., Rieck, C., Bück, A., Tsotsas, E.: Modelling of continuous spray-coating in fluidized bed with a vertical tube air classifier, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
  426. Idakiev, V., Mielke, L., Bück, A., Tsotsas, E., Mörl, L.: Applications of inductive energy input in fluidized beds, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
  427. Hoffmann, T., Mielke, L., Henneberg, M., Peglow, M., Bück, A., Tsotsas, E.: Energy saving potential in batch fluidized bed granulation process by temporal separation of sub-processes, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
  428. Bück, A., Dürr, R., Vorhauer, N., Friese, L., Tsotsas, E.: Feedback control of microwave drying of solids, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
  429. Chen, K., Schmidt, M., Bück, A., Jacob, M., Tsotsas, E.: A model-based investigation of particle drying process in multi-stage fluidized bed, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
  430. Shamaei, S., Seiiedlou, S.S., Aghbashlo, M., Tsotsas, E., Kharaghani, A.: Optimization of the walnut oil microencapsulation process using the response surface methodology, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
  431. Schmidt, M., Bück, A., Tsotsas, E.: Influence of drying conditions in spray fluidized bed agglomeration behavior of amorphous food powders, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
  432. Vorhauer, N., Rahimi, A., Tsotsas, E., Prat, M.: Non-isothermal drying of thin porous disks, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
  433. Zarekar, S., Bück, A., Jacob, M., Tsotsas, E.: CFD simulation of spray dynamics in a fluidized bed operated under reduced pressure, Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
  434. Jaskulski, M., Meyer, K., Tsotsas, E.: How do thermal effects influence granule properties in a horizontal fluidized bed? Proceedings of the 20th International Drying Symposium (IDS2016), 7.-10. August 2016, Gifu/Japan
  435. Pashminehazar, R., Kharaghani, A., Tsotsas, E.: Three dimensional characterization of morphology and internal structure of soft material agglomerates produced in spray fluidized bed by X-ray tomography, Powder Technol., 300 (2016), 46-60
  436. Bachmann, P., Bück, A., Tsotsas, E.: Investigation of the residence time behavior of particulate products and correlation for the Bodenstein number in horizontal fluidized beds, Powder Technol., 301 (2016), 1067-1076
  437. Idakiev, V., Bück, A., Tsotsas, E., Mörl, L.: Inductive heating of a cylindrical fluidized bed, J. Chem. Technol.  Metall., 51 (2016), 627-638
  438. Le, K.H., Kharaghani, A., Kirsch, C., Tsotsas, E.: Pore network simulations of heat and mass transfer inside an unsaturated capillary porous wick in the dry-out regime, Transp. Porous Med., 114 (2016), 623-648
  439. Shamaei, S., Kharaghani, A., Seiiedlou, S.S., Aghbashlo, M., Sondej, F., Tsotsas, E.: Drying behavior and locking point of single droplets containing functional oil,  Adv. Powder Techn., 27 (2016), 1750-1760
  440. Börnhorst, M., Walzel, P., Rahimi, A., Kharaghani, A., Tsotsas, E., Nestle, N., Besser, A., Kleine Jäger, F., Metzger, T.: Influence of pore structure and impregnation-drying conditions on the solid distribution in porous support materials, Drying Technol., 34 (2016), 1964-1974
  441. Mirdrikvand, M., Imani, M.S., Kharaghani, A., Roozbehani, B.: Optimization of a pilot-scale amine scrubber to remove SO2: Higher selectivity and lower solvent consumption, Chem. Eng. Techn., 39 (2016), 246-254
  442. Idakiev, V., Lazarova, P., Bück, A., Tsotsas, E., Mörl, L.: Inductive heating of fluidized beds: Drying of particulate solids, Powder Technol., 306 (2017), 26-33
  443. Farid, M.U., Bück, A., Heineken, Gohla, M., Zobel, N.: Study on nozzle design for combustion of solid materials with low melting points,
    Appl. Thermal. Eng., 115 (2017), 832-859
  444. Bachmann, P., Bück, A., Tsotsas, E.: Experimental investigation and correlation of the Bodenstein number in horizontal fluidized beds with internal baffles, Powder Technol., 308 (2017), 378-387
  445. Börner, M., Bück, A., Tsotsas, E.: DEM-CFD investigation of particle residence time distribution in top-spray fluidized bed granulation,
    Chem. Eng. Sci., 161 (2017), 187-197
  446. Tran, T.T.H., Jaskulski, Avila-Acevedo, J., Tsotsas, E.: Model parameters for single-droplet drying of skim milk and its constituents at moderate and elevated temperatures, Drying Technol., 35 (2017), 444-464
  447. Neugebauer, C., Palis, S., Bück, A., Tsotsas, E., Heinrich, S., Kienle, A.: A dynamic two-zone model of continuous fluidized bed layering granulation with internal product classification, Particuology, 31 (2017), 8-14
  448. Tada, E.F.R., Bück, A., Casciatori, F.P., Tsotsas, E., Toméo, J.C.: Investigation of heat transfer in partially filled horizontal drums,
    Chem. Eng. J., 316 (2017), 988-1003
  449. Moghaddam, A., Kharaghani, A., Tsotsas, E., Prat, M.: Kinematics in a slowly drying porous medium: Reconciliation of pore network simulations and continuum modeling, Physics of Fluids, 29 (2017), 022102
  450. Shamaei, S., Seiiedlou, S.S., Aghbashlo, M., Tsotsas, E., Kharaghani, A.: Microencapsulation of walnut oil by spray drying: Effects of wall material and drying conditions on physicochemical properties of microcapsules, Innovative Food Sci. Emerg. Technol., 39 (2017), 101-112
  451. Meyer, K., Bück, A., Tsotsas, E.: Determination of particle exchange rates at over-flow weirs in horizontal fluidized beds by particle tracking velocimetry, Particuology, 32 (2017), 1-9
  452. Jiang, Z., Hagemeier, T., Bück, A., Tsotsas, E.: Experimental measurements of particle collision dynamics in a pseudo-2D gas-solid fluidized bed, Chem. Eng. Sci., 167 (2017), 297-316
  453. Idakiev, V., Graner, S., Bück, A., Tsotsas, E., Mörl, L.: Wärmeübergangsuntersuchungen in einer induktiv beheizten Wirbelschicht mit heterogener Schichtzusammensetzung, Chem.-Ing.-Tech., 89 (2017), 772-784
  454. Vorhauer, N., Mirsadraee, N., Tretau, A., Bück, A., Tsotsas, E., Prat, M.: Combined convective and microwave drying of wet clay, Proceedings of the Nordic Baltic Drying Conference (NBDC2017) 7.-9. Juni 2017, Hamburg
  455. Idakiev, V., Bück, A., Tsotsas, E., Mörl, L.: Inductive energy input in fluidized beds and its applications, Proceedings of the Nordic Baltic Drying Conference (NBDC2017) 7.-9. Juni 2017, Hamburg
  456. Moghaddam, A.A., Kharaghani, A., Tsotsas, E., Prat, M.: Insights into the velocity field in a slowly drying capillary porous medium, Proceedings of the 6th European Drying Conference (EuroDrying 2017), 19.-21. Juni 2017, Liège/Belgien
  457. Vorhauer, N., Ahmad, F., Tretau, A., Bück, A., Tsotsas, E., Prat, M.: Pore scale investigation of drying under periodic temperature variation, Proceedings of the 6th European Drying Conference (EuroDrying 2017), 19.-21. Juni 2017, Liège/Belgien
  458. Le, K.H., Kharaghani, A., Tsotsas, E.: Impact of heating modes on the behavior of superheated steam drying in capillary porous media, Proceedings of the 6th European Drying Conference (EuroDrying 2017), 19.-21. Juni 2017, Liège/Belgien
  459. Mielke, L., Hoffmann, T., Peglow, M., Henneberg, M., Bück, A., Tsotsas, E.: Energy efficiency and scale-up of fluidized bed coating processes with temporal separation of layering and particle drying, Proceedings of the 8th International Granulation Workshop, 28.-30. Juni 2017, Sheffield/England
  460. Jiang, Z., Rieck, C., Bück, A., Tsotsas, E.: Estimation of coefficient of restitution of irregular shaped particles on horizontal substrates, Proceedings of the 8th International Granulation Workshop, 28.-30. Juni 2017, Sheffield/England
  461. Rieck, C., Bück, A., Tsotsas, E.: Influence of contact liquid dispersion on fluidized bed spray agglomeration,  Proceedings of the 8th International Granulation Workshop, 28.-30. Juni 2017, Sheffield/England
  462. Müller, D., Bück, A., Tsotsas, E.: Modelling of one-stage continuous fluidized bed spray-coating, Proceedings of the 8th International Granulation Workshop, 28.-30. Juni 2017, Sheffield/England
  463. Wu, R., Tsotsas, E., Kharaghani, A.: Convective drying in thin hydrophobic porous media, Int. J. Heat Mass Transfer, 112 (2017), 630-642
  464. Hiep, K.L., Kharaghani, A., Kirsch, C., Tsotsas, E.: Discrete pore network modeling of superheated steam drying, Drying Technol., 35 (2017), 1584-1601
  465. Tran, T.T.H., Jaskulski, Tsotsas, E.: Reduction of a model for single droplet drying and application to CFD of skim milk spray drying, Drying Technol., 35 (2017), 1571-1583
  466. Chen, K., Bachmann, P., Bück, A., Jacob, M., Tsotsas, E.: Experimental  study and modeling of particle drying in a continuously-operated horizontal fluidized bed, Particuology, 34 (2017), 134-146
  467. Schmidt, M., Bück, A., Tsotsas, E.: Shell porosity in spray fluidized bed coating with suspensions, Adv. Powder Technol., 28 (2017), 2921-2928
  468. Schmidt, M., Bück, A., Tsotsas, E.: Experimental investigation of the influence of drying conditions on process stability of continuous spray fluidized bed layering granulation with external product separation, Powder Technol., 320 (2017), 474-482
  469. Fischer, C., Jaskulski, M., Tsotsas, E.: Inline method of droplet and particle size distribution analysis in dilute disperse systems, Adv. Powder Technol., 28 (2017), 2820-2829
  470. Jaskulski, M., Atuonwu, J.C., Tran, T.T.H., Stapley, A.G.F., Tsotsas, E.: Predictive CFD modelling of whey protein denaturation in skim milk spray drying powder productions, Adv. Powder Technol., 28 (2017), 3140-3147
  471. Moghaddam, A., Prat, M., Tsotsas, E., Kharaghani, A.: Evaporation in capillary porous media at the perfect piston-like invasion limit: Evidence of nonlocal equilibrium effects, Water Resources Research, 53 (2017), 10422-10449
  472. Jiang, Z., Hagemeier, T., Bück, A., Tsotsas, E.: Color-PTV measurement and CFD-DEM simulation of poly-disperse particle systems in a pseudo-2D fluidized bed, Chem. Eng. Sci., 179 (2018), 115-132
  473. Jiang, Z., Bück, A., Tsotsas, E.: CFD-DEM study of residence time, droplet deposition, and collision velocity for a binary particle mixture in a Wurster fluidized bed coater, Drying Technol., 36 (2018), 638-650
  474. Vorhauer, N., Tsotsas, E., Prat, M.: Drying of thin porous disks from pore network simulations, Drying Technol., 36 (2018), 651-663
  475. Moghaddam, A., Kharaghani, A., Tsotsas, E., Prat, M.: A pore network study of evaporation from the surface of a drying non-hygroscopic porous medium, AIChE J., 64 (2018), 1435-1447
  476. Pashminehazar, R., Ahmed, S.J., Kharaghani, A., Tsotsas, E.: Spatial morphology of maltodextrin agglomerates from X-ray microtomographic data: Real structure evaluation vs. spherical primary particle model, Powder Technol., 331 (2018), 204-217
  477. Vu, H.T., Tsotsas, E.: Mass and heat transport models for analysis of the drying process in porous media: A review and numerical implementation, Intern. J. Chem. Eng., 2018, Article ID 9456418
  478. Neugebauer, C., Bück, A., Palis, S., Mielke, L., Tsotsas, E., Kienle, A.: Influence of thermal conditions on particle properties in fluidized bed layering granulation, Proceedings of the 6th International Conference on Population Balance Modelling (PBM), 06.-09. Mai 2018, Ghent/Belgien
  479. Golovin, I., Strenzke, G., Wegner, M., Palis, S., Bück, A., Kienle, A., Tsotsas, E.: Parameter identification for continuous fluidized bed spray agglomeration, Proceedings of the 6th International Conference on Population Balance Modelling (PBM), 06.-09. Mai 2018, Ghent/Belgien
  480. Hampel, N., Roydeva, E., Bück, A., Tsotsas, E.: Coating of finely dispersed particles by two-fluid nozzle, Particuology, 38 (2018), 80-93
  481. Le, K.H., Tsotsas, E., Kharaghani, A.: Continuum-scale modeling of superheated steam drying of cellular plant porous media, Int. J. Heat Mass Transfer, 124 (2018), 1033-1044
  482. Idakiev, V.V., Steinke, C., Sondej, F., Bück, A., Tsotsas, E., Mörl, L.: Inductive heating of fluidized beds: Spray coating process, Powder Technol., 328 (2018), 26-37
  483. Sondej, F., Peglow, M., Bück, A., Tsotsas, E.: Experimental investigation of the morphology of salt deposits from drying sessile droplets by white-light interferometry, AIChE J., 64 (2018), 2002-2016
  484. Zhang, L., Weigler, F., Idakiev, V., Jiang, Z., Mörl, L., Mellmann, J., Tsotsas, E.: Experimental study of the particle motion in flighted rotating drums by means of magnetic particle tracking, Powder Technol., 339 (2018), 817-826
  485. Rieck, C., Schmidt, M., Bück, A., Tsotsas, E.: Monte Carlo modeling of binder-less spray agglomeration in fluidized beds, AIChE J., 64 (2018), 3582-3594
  486. Le, K.H., Hampel, N., Kharaghani, A., Bück, A., Tsotsas, E.: Superheated steam drying of single wood particles: A characteristic drying curve model deduced from continuum model simulations and assessed by experiments, Drying Technol., 36 (2018), 1866-1881
  487. Diez, E., Meyer, K., Bück, A., Tsotsas, E., Heinrich, S.: Influence of process conditions on the product properties in a continuous fluidized bed spray granulation process, Chem. Eng. Res. & Design, 139 (2018), 104-115
  488. Strenzke, G., Golovin, I., Wegner, M., Palis, S., Bück, A., Kienle, A., Tsotsas, E.: Influence of drying conditions on process properties and parameter identification for continuous fluidized bed spray agglomeration, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
  489. Mielke, L.; Bück, A., Tsotsas, E.: Multi-zone & multi-compartment model for dynamic simulation of horizontal fluidized bed granulator, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
  490. Müller, D., Bück, A., Tsotsas, E.: Heat and mass transfer modelling of continuous Wurster-spray-granulation with external product classification, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
  491. Först, P., Lechner, M., Vorhauer, N., Schuchmann, H., Tsotsas, E.: Experimental investigation on pore size distribution and drying kinetics during lyophilizarion of sugar solutions, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
  492. Du, J., Bück, A., Tsotsas, E.: Investigation of spray agglomeration process in continuously operated horizontal fluidized bed, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
  493. Jiang, Z., Rieck, C., Bück, A., Tsotsas, E.: Modeling of particle behavior in a Wurster fluidized bed: Coupling CFD-DEM with Monte Carlo, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
  494. Jaskulski, M., Tran, H.T.T., Tsotsas, E.: CFD model-supported design of monodisperse co-current spray dryers, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
  495. Vorhauer, N., Först, P., Schuchmann, H., Tsotsas, E.: Pore network model of primary freeze drying, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
  496. Pham, T.S., Chareyre, B., Tsotsas, E., Kharaghani, A.: A pore-scale study on the drying kinetics and mechanical behavior of particle aggregates, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
  497. Zhang, L., Weigler, F., Jiang, Z., Idakiev, V., Mörl, L., Mellmann, J., Tsotsas, E.: Investigation of 3D particle flow in a flighted rotating drum, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
  498. Rahimi, A., Metzger, T., Kharaghani, A., Tsotsas, E.: Discrete modelling of ion transport and crystallization in layered porous media during drying, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
  499. Lu, X., Kharaghani, A., Tsotsas, E.: Dependency of continuum model parameters on the spatially correlated pore structure studied by pore-network drying simulations, Proceedings of the 21th International Drying Symposium (IDS2018), 11.-14. September 2018, Valencia/Spanien
  500. Vorhauer, N., Tsotsas, E., Prat, M.: Temperature gradient double stabilization of the evaporation front within a drying porous media, Phys. Rev. Fluids, 3 (2018), 114201
  501. Neugebauer, C., Bück, A., Palis, S., Mielke, L., Tsotsas, E., Kienle, A.: Influence of thermal conditions on particle properties in fluidized bed layering granulation, Processes, (2018), 6, 235
  502. Gouaou, I, Shamaei, S., Koutchoukali, M.B., Tsotsas, E., Kharaghani, A.: Impact of operating conditions on a single droplet and spray drying of hydroxypropylated pea starch: Process performance and final powder properties, Asia-Pac. J. Chem. Eng., e2268, (2018), 1-18
  503. Golovin, I., Strenzke, G., Dürr, R., Palis, S., Bück, A., Tsotsas, E., Kienle, A.: Parameter identification for continuous fluidized bed spray agglomeration, Processes, (2018), 6, 246
  504. Müller, D., Bück, A., Tsotsas, E.: Influence of separation properties and processing strategies on product characteristics in continuous fluidized bed spray granulation, Powder Technol., 342 (2019), 572-584
  505. Pashminehazar, R., Kharaghani, A., Tsotsas, E.: Determination of fractal dimension and prefactor of agglomerates with irregular structure, Powder Technol., 343 (2019), 765-774
  506. Tsotsas, E.: Particle-particle heat transfer in thermal DEM: Three competing models and a new equation, Int. J. Heat Mass Transfer, 132 (2019), 939-943
  507. Chen, K., Bachmann, P., Bück, A., Jacob, M., Tsotsas, E.: CFD simulation of particle residence time distribution in industrial scale horizontal fluidized bed, Powder Technol., 345 (2019), 129-139
  508. Kharaghani, A., Le, K.H., Tran, T.T.H., Tsotsas, E.: Reaction engineering approach for modeling single wood particle drying at elevated air temperature, Chem. Eng. Sci., 199 (2019), 602-612
  509. Vu, H.T., Tsotsas, E.: A framework and numerical solution of the drying process in porous media by using a continuous model, Intern. J. Chem. Eng., 2019, Article ID 9043670
  510. Strenzke, Bück, A., Tsotsas, E.: Experimental investigation of dynamic process stability of continuous fluidized bed spray agglomeration with internal classification, Proceedings of the International Congress on Particle Technology, PARTEC, 9.-11. April 2019, Nürnberg
  511. Pham, T.S., Chareyre, B., Tsotsas, E., Kharaghani, A.: Mechanical behaviour of particle aggregates during drying, Proceedings of the International Congress on Particle Technology, PARTEC, 9.-11. April 2019, Nürnberg
  512. Idakiev, V., Bück, A., Mörl, L., Tsotsas, E.: Inductive heating of fluidized beds: Mobile versus stationary heat exchange elements, Drying Technol., 37 (2019), 652-663
  513. Szadzinska, J., Lechtanska, J., Pashminehazar, R., Kharaghani, A., Tsotsas, E.: Microwave- and ultrasound-assisted convective drying of raspberries: Drying kinetics and microstructural changes, Drying Technol., 37 (2019), 1-12
  514. Zarekar, S., Bück, A., Jacob, M., Tsotsas, E.: Numerical study of the hydrodynamics of fluidized beds operated under sub-atmospheric pressure, Chem., Eng. J., 372 (2019), 1134-1153
  515. Jabbari, Y., Tsotsas, E., Kirsch, C., Kharaghani, A.: Determination of the moisture transport coefficient from pore network simulations of spontaneous imbibition in capillary porous media, Chem. Eng. Sci. 207 (2019), 600-610
  516. Hampel, N., Le, K.H., Kharaghani, A., Tsotsas, E.: Continuous modeling of superheated steam drying of single rice grains, Drying Technol., 37 (2019), 1583-1596
  517. Jiang, Z., Chen, K., Bück, A., Tsotsas, E.: Novel algorithm for particle tracking velocimetry (PTV) of non-spherical particles, Proceedings of the 9th International Granulation Workshop, 26.-27. Juni 2019, Lausanne/Switzerland
  518. Rieck, C., Müller, D., Bück, A., Tsotsas, E.: Modeling of undesired agglomeration in fluidized bed coating, Proceedings of the 9th International Granulation Workshop, 26.-27. Juni 2019, Lausanne/Switzerland
  519. Strenzke, G., Du, J., Bück, A., Tsotsas, E.: Experimental investigation of process behavior of continuous fluidized bed spray agglomeration with internal classification, Proceedings of the 9th International Granulation Workshop, 26.-27. Juni 2019, Lausanne/Switzerland
  520. Rahimi, A., Kharaghani, A., Metzger, T., Tsotsas, E.: Pore network modelling of a shrinking porous medium saturated with a solution, Proceedings of the 7th European Drying Conference (EuroDrying 2019), 10.-11. Juli 2019, Torino/Italy
  521. Foerst, P., Gruber, S., Hilmer, M., Vorhauer, N., Schulz, M., Tsotsas, E.: Freeze drying behavior of spray frozen and pelletized materials by neutron radiography and tomography, Proceedings of the 7th European Drying Conference (EuroDrying 2019), 10.-11. Juli 2019, Torino/Italy
  522. Mahmood, H., Lu, X., Tsotsas, E., Kharaghani, A.: The role of discrete capillary rings in mass transfer from the surface of capillary porous medium during drying, Proceedings of the 7th European Drying Conference (EuroDrying 2019), 10.-11. Juli 2019, Torino/Italy
  523. Vorhauer, N., Altaf, H., Tsotsas, E., Vidakovic-Koch, T.:Pore network simulation of gas-liquid distribution in porous transport layers,Processes, (2019), 7, 558
  524. Diez, E., Kieckhefen, P., Meyer, K., Bück, A., Tsotsas, E., Heinrich, S.:Particle dynamics in a multistaged fluidized bed: Particle transport behavior on micro-scale by discrete particle modelling, Adv. Powder Technol., 30 (2019), 2014-2031
  525. Singh, A.K., Tsotsas, E.:Stochastic model to simulate spray fluidized bed agglomeration: A morphological approach,Powder Technol., 355 (2019), 449-460
  526. Pramudita, D., Tsotsas, E.:A model of pulse combustion drying and breakup of colloidal suspension droplets,Powder Technol., 355 (2019), 755-769
  527. Vorhauer, N., Tretau, A., Bück, A., Prat, M.: Microwave drying of wet clay with intermittent heating, Drying Technol., 37 (2019), 664-678 

  528. Geistlinger, H., Ding, Yi, Apelt, B., Schlüter, S., Küchler, M., Reuter, D., Vorhauer, N.: Evaporation study based on micromodel Experiments: Comparison of theory and Experiment, Water Resources Research, 55 (2019), 6653-6672

  529. Jiang, Z., Du, J., Rieck, C., Bück, A., Tsotsas, E.:PTV experiments and DEM simulations of the coefficient of restitution for irregular particles impacting on horizontal substrates,Powder Technol., 360 (2020), 352-365
  530. Jiang, Z., Rieck, C., Bück, A., Tsotsas, E.:Modeling of inter- and intra-particle coating uniformity in a Wurster fluidized bed by a coupled CFD-DEM-Monte Carlo approach,Chem. Eng. Sci., 211 (2020), 115289
  531. Le, K.H., Tran, H.T.T., Kharaghani, A., Tsotsas, E.:Experimental benchmarking of diffusion and reduced models for convective drying of single rice grains,Drying Technol., 38 (2020), 200-210
  532. Jaskulski, M., Tran, H.T.T., Tsotsas, E.:Design study of printer nozzle spray dryer by computational fluid dynamics modeling,Drying Technol., 38 (2020), 211-223
  533. Zhang, L., Jiang, Z., Weigler, F., Herz, F., Mellmann, J., Tsotsas, E.:PTV measurement and DEM simulation of the particle motion in a flighted rotating drum,Powder Technol., 363 (2020), 23-37
  534. Wu, R., Zhang, T., Ye, C., Zhao, C.Y., Tsotsas, E., Kharaghani, A.:Pore network model of evaporation in porous media with continuous and discontinuous corner films, Phys. Rev. Fluids, 5 (2020), 014307
  535. Du, J., Bück, A., Tsotsas, E.:Influence of process variables on spray agglomeration process in a continuously operated horizontal fluidized bed,Powder Technol., 363 (2020), 195-206
  536. Hilmer, M., Peters, J., Schulz, M., Gruber, S., Vorhauer, N., Tsotsas, E., Foerst, P.:Development of an experimental setup for in situ visualization using neutron radiography and computed tomography,Review of Scientific Instruments, 91 (2020), 014102
  537. Gruber, S., Vorhauer, N., Schulz, M., Hilmer, M., Peters, J., Tsotsas, E., Foerst, P.:Estimation of the local sublimation front velocities from neutron radiography and tomography of particulate matter,Chem. Eng. Sci., 211 (2020), 115268
  538. Singh, A. K., Tsotsas, E.:A tunable aggregation of spray fluidized bed agglomeration,Powder Technol., 364 (2020), 417-428
  539. Rezendes Tada, E.F., Bück, A., Tsotsas, E., Thoméo, J. C.:Mass transport in a partially filled horizontal drum: Modelling and experiments,Chem. Eng. Sci., 214 (2020), 115448
  540. Panda, D., Supriya, B., Kharaghani, A., Tsotsas, E., Surasani, V.K.:Lattice Boltzmann simulations for micro-macro interactions during isothermal drying of bundle of capillaries, Chem. Eng. Sci., 220 (2020), 115634
  541. Rieck, C., Bück, A., Tsotsas, E.:Estimation of the dominant size enlargement mechanism in spray fluidized bed processes,AIChE J., 2020, 66:e 16920
  542. Altaf, H., Vorhauer, N., Tsotsas, E., Vidakovic-Koch, T.: Steady-state water drainage by oxygen in anodic porous transport layer of electrolyzers: A 2D pore network study,Processes, 2020, 8(3):362

  543. Foerst, P., Gruber, S., Schulz, M., Vorhauer, N., Tsotsas, E.:Characterization of lyophilization of frozen bulky solids,Chem. Eng. Technol., 43 (2020), 789-796

  544. Bachmann, P., Chen, K., Bück, A., Tsotsas, E.:Prediction of particle size and layer-thickness distributions in a continuous horizontal fluidized-bed coating process,Particuology, 50 (2020), 1-12

  545. Le, K.H., Tran, T.T.H., Kharaghani, A., Tsotsas, E.:Modeling of superheated steam drying of wood particles,Journal of Mechanical Engineering Research and Developments, 43 (2020), 160-170

  546. Lu, X., Kharaghani, A., Tsotsas, E.:Transport parameters of macroscopic continuum model determined from discrete pore network simulations of drying porous media: Throat-node vs. throat-pore configuations, Chem. Eng. Sci., 223 (2020), 115723

  547. Strenzke, G., Dürr, R., Bück, A., Tsotsas, E.:Influence of operating parameters on process behavior and product quality in continuous spray fluidized bed agglomeration,Powder Technol., 375 (2020), 210-220

  548. Vorhauer-Huget, N., Mannes, D., Hilmer, M., Gruber, S., Strobl, M., Tsotsas, E., Foerst, P.: Freeze-drying with structured sublimation fronts – visualization with neutron imaging,Processes, 8 (2020), 1091

  549. Ahmad, F., Talbi, M., Prat, M., Tsotsas, E., Kharaghani, A.:Non-local equilibrium continuum modeling of partially saturated drying porous media: Comparison with pore network simulations,Chem. Eng. Sci., 228 (2020), 115957

  550. Vorhauer-Huget, N., Altaf, H., Dürr, R., Tsotsas, E., Vidakovic-Koch, T.:Computational optimization of porous structures for electrochemical processes,Processes, 8 (2020), 1205

  551. Lu, X., Kharaghani, A., Adloo, H., Tsotsas, E.:The Brooks and Corey capillary pressure model revisited from pore network simulations of capillarity-controlled invasion percolation process, Processes, 8 (2020), 131

  552. Zhang, R., Hoffmann, T., Tsotsas, E.: Novel technique for coating of fine particles using fluidized bed and aerosol atomizer, Processes, 8 (2020), 1525

  553. Zhang, T., Wu, R., Zhao, C.Y., Tsotsas, E., Kharaghani, A.: Capillary instability induced gas-liquid displacement in porous media: Experimental observation and pore network model, Phys. Rev. Fluids, 5 (2020), 104305

  554. Panda, D., Paliwal, S., Sourya, D.P., Kharaghani, A., Tsotsas, E., Surasani, V.K.: Influence of thermal gradients on the invasion patterns during drying of porous media: A Lattice Boltzmann Method, Physics of Fluids, 32 (2020), 122116

  555. Mezhericher, M., Rieck, C., Razorenov, N., Tsotsas, E.: Ultrathin coating of particles in fluidized bed using submicron droplet aerosol, Particuology, 53 (2020), 23-29 

  556. Ahmad, F., Rahimi, A., Tsotsas, E., Prat, M., Kharaghani, A.: From micro-scale to macro-scale modeling of solute transport in drying capillary porous media, Int. J. Heat Mass Transfer, 154B (2021), 120722 

  557. Le, K.H., Tran, T.T.H., Tsotsas, E., Kharaghani, A.: Superheated steam drying of single wood particles: Modeling and comparative study with hot air drying, Chem. Eng. Technol., 44 (2021), 114-123 

  558. Lu, X., Tsotsas, E., Kharaghani, A.: Insights into evaporation from the surface of capillary porous media gained by discrete pore network simulations, Int. J. Heat Mass Transfer, 168 (2021), 120877

  559. Mielke, L., Bück, A., Tsotsas, E.: Multi-stage and multi-compartment model for dynamic simulation of horizontal fluidized bed granulator, Drying Technol., 39 (2021), 203-218

  560. Silva Canedo, M., Santos Figueiredo, M.F., Thomik, M., Vorhauer-Huget, N., Tsotsas, E., Thomeo, J.C.: Porosity and pore size distribution of beds composed by sugarcane bagasse and wheat bran for solid-state cultivation, Powder Technol., 386 (2021), 166-175

  561. Lu, X., Tsotsas, E., Kharaghani, A.: Drying of capillary porous media simulated by coupling of continuum-scale and micro-scale models, Int. J. Multiphase Flow, 140 (2021), 103654

  562. Briest, L., Tsotsas, E., Vorhauer-Huget, N.: Experimentelle Untersuchung der Mikrowellentrocknung von Sanitärkeramiken, Keramische Zeitschrift, 2 (2021), 36-42

  563. Janocha, M., Tsotsas, E.: In silico investigation of the evaporation flux distribution along sessile,droplet surfaces during convective drying, Chem. Eng. Sci., 238 (2021), 116590

  564. Du, J., Chen, K., Bück, A., Tsotsas, E.:Stochastic simulation of spray agglomeration process in a continuously operated horizontal fluidized bed by Monte Carlo method, Proceedings of the 13th International Conference on Fluidized bed Technology, CFB-13, Online, 10.-14. Mai 2021

  565. Janocha, M., Tsotsas, E.:Analysis of drying parameter effects on porosity evolution during successive layer build-up from dried deposited droplets, Proceedings of the 13th International Conference on Fluidized bed Technology, CFB-13, Online, 10.-14. Mai 2021

  566. Strenzke, G., Dürr, R., Bück, A., Kienle, A., Tsotsas, E.:Experimental investigation of process behaviour of continuous fluidized bed spray agglomeration with internal classification, Proceedings of the 13th International Conference on Fluidized bed Technology, CFB-13, Online, 10.-14. Mai 2021

  567. Singh, A.K., Tsotsas, E.:Stochastic simulation of spray fluidized bed agglomeration by modeling the morphology, Proceedings of the 13th International Conference on Fluidized bed Technology, CFB-13, Online, 10.-14. Mai 2021

  568. Zhang, R., Hoffmann, T., Tsotsas, E.: Novel technique for coating of fine particles using fluidized bed and aerosol atomizer, Proceedings of the 13th International Conference on Fluidized bed Technology, CFB-13, Online, 10.-14. Mai 2021

  569. Kharaghani, A., Mahmood, H.T., Wang, Y., Tsotsas, E.: Three-dimensional visualization and modeling of capillary liquid rings observed during drying of dense particle packings, Int. J. Heat Mass Transfer, 177 (2021), 121505

  570. Paliwal, S., Panda, D., Bhaskaran, S., Vorhauer-Huget, N., Tsotsas, E., Surasani, V.K.:Lattice Boltzmann method to study the water-oxygen distributions in porous transport layer (PTL) of polymer electrolyte membrane (PEM) electrolyser.Intern. J. Hydrogen Energy, 46 (2021), 22747-22762

  571. Gruber, S., Vorhauer-Huget, N., Schulz, M., Peters, J., Tsotsas, E., Foerst, P.: Beschreibung der Sublimationsfront in Schüttgütern mittels Neutronenradiografie und -tomografie, Pharm. Ind., 83 (2021), 694-704
  572. Zhang, L., Jiang, Z., Mellmann, J., Weigler, F., Herz, F., Bück, A., Tsotsas, E.: Influence of the number of flights on the dilute phase ratio in flighted rotating drums by PTV measurements and DEM simulations, Particuolgy, 56 (2021), 171-182
  573. Pramudita, D., Teiwes, A., Jacob, M., Tsotsas, E.: Crust breakage in production of fine particles using pulse combustion drying: Experimental and numerical investigations, Powder Technol., 393 (2021), 77-98
  574. Janocha, M., Tsotsas, E.: In-depth investigation of incremental layer build-up from dried deposited droplets, AIChE J., 66 (2021), e17436

  575. Otto, E., Dürr, R., Palis, Bück, A., Tsotsas, E., Kienle, A.: Kernel identification in continuous fluidized bed spray agglomeration from steady state data, Adv. Powder Technol., 32 (2021), 2517-2529

  576. Singh, A.K., Tsotsas, E.: A fast and improved tunable aggregation model for stochastic simulation of spray fluidized bed agglomeration, Energies, 14 (2021), 72221

  577. Mahmood, H.F., Tsotsas, E., Kharaghani, A.: The role of discrete capillary rings in mass transfer from the surface of a drying capillary porous medium, Transport Porous Media, 140 (2021), 351-369

  578. Singh, A.K., Tsotsas, E.: Influence of polydispersity and breakage on stochastic simulations of spray fluidized bed agglomeration, Chem. Eng. Sci., 247 (2022), 117022

  579. Hussain, F., Jaskulski, M., Piatkowski, M., Tsotsas, E.: CFD simulation of agglomeration and coalescence in spray dryer, Chem. Eng. Sci., 247 (2022), 117064

  580. Du, J., Strenzke, G., Bück, A., Tsotsas, E.: Monte Carlo modeling of spray agglomeration in a cylindrical fluidized bed: From batch-wise to continuous processes, Powder Technol., 396 (2022), 113-126

  581. Zhan, N., Wu, R., Tsotsas, E., Kharaghani, A.: Proposal for extraction of pore networks with pores of high aspect ratios, Phys. Rev. Fluids, 7 (2022), 014304

  582. Strenzke, G., Janocha, M., Bück, A., Tsotsas, E.: Morphological descriptors of agglomerates produced in continuously operated spray fluidized beds, Powder Technol., 397 (2022), 117111

  583. Pramudita, D., Humjaa, S., Tsotsas, E.: Droplet drying and whey protein denaturation in pulsed gas flow - modeling study, J. Food Eng., 321 (2022), 110959

  584. Bhaskaran, S., Pandey, D., Panda, D., Paliwal, S., Vorhauer, N., Tsotsas, E., Surasani, V.K.: Study on film effects during isothermal drying of square capillary tube using Lattice Boltzmann method, Drying Technol., 40 (2022), 735-747

  585. Thomik, M., Gruber, S., Foerst, P., Tsotsas, E., Vorhauer-Huget, N.: Determination of 3D pore network structure of freeze dried maltodextrin, Drying Technol., 40 (2022), 748-766

  586. Wu, W., Chen, K., Tsotsas, E.: Prediction of particle mixing time in a rotary drum by 2D DEM simulations and cross-correlation, Adv. Powder Technol., 33 (2022), 103512

  587. Panda, D., Bhaskaran, S., Paliwal, S., Kharaghani, A., Tsotsas, E., Surasani, V.K.: Pore-scale physics of drying porous media revealed by Lattice Boltzmann simulations, Drying Technol., 40 (2022), 1114-1129

  588. Wang, R., Singh, A.K., Kolan, S.R., Tsotsas, E.: Fractal analysis of aggregates: Correlation between the 2D and 3D box-counting fractal dimension and power law fractal dimension, Chaos, Solitons and Fractals, 160 (2022), 112246

  589. Rodrigues, S.J., Vorhauer-Huget, N., Tsotsas, E.: Effective thermal conductivity of packed beds made of cubical particles, Intern. J. Heat Mass Transfer, 194 (2022), 122994

  590. Ahmad, F., Prat, M., Tsotsas, E., Kharaghani, A.: Two-equation continuum model of drying appraised by comparison with pore network simulations, Intern. J. Heat and Mass Transfer, 194 (2022), 123073

  591. Pour, Y.D., Krasovitov, B., Fominykh, A., Hashemloo, Z., Kharaghani, A., Tsotsas, E., Levy, A.:Intensification of spray drying granulation process by gas absorption accompanied by chemical dissociation reactions, Chem. Eng. J., 433 (2022), 133566

  592. Janocha, M., Tsotsas, E.: Coating layer formation from deposited droplets: A comparison of nanofluid, microfluid and solution, Powder Technol., 399 (2022), 117202

  593. Pham, S.T., Chareyre, B., Tsotsas, E., Kharaghani, A.: Pore network modeling of phase distribution and capillary force evolution during slow drying of particle aggregates, Powder Technol., 407 (2022), 117627

  594. Vorhauer-Huget, N., Briest, L., Wagner, Tretau, A., Rahimi, A., Tsotsas, E.: Einsatz von Mikrowellenerwärmung zur Elektrifizierung der Ziegelrohlingstrocknung, ZI, 3 (2022), 8-24

  595. Briest, L., Wagner, R., Tretau, A., Tsotsas, E., Vorhauer-Huget, N.: Microwave-assisted drying of clay roof tiles, Drying Technol., 40 (2022), 1804-1818

  596. Thomik, M., Gruber, S., Kaestner, A., Foerst, P., Tsotsas, E., Vorhauer-Huget, N.: Experimental study of the impact of pore structure on drying kinetics and sublimation front  patterns, Pharmaceutics, 14 (2022), 1538

  597. Desai, K.S., Seenuvasan, K., Bhaskaran, S., Pandey, D., Bandaru, N., Vorhauer-Huget, N., Tsotsas, E., Surasani, V.K.: Comparison of CM and LBM to study multiphase flow in the anodic porous transport layer of PEM water electrolyzer, Proceedings of International Conference on Novel Materials and Technologies for Energy and Environment Applications, 18-19 February, 2022, online

  598. Ehrhardt, A.L., Vorhauer-Huget, N., Rzepus, H.J., Broneske, D.: Animation of a forgotten invention: The soda locomotive, Proceedings of Edulearn, 4-6 July 2022, Palma, Spain

  599. Hussain, F, Sondej, F., Jaskulski, M., Peglow, M. Tsotsas, E.:Experimental determination of binary droplet-droplet collisions in spray drying atomization zone, Proceedings of 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA

  600. Du, J., Singh, A. Bück, A., Tsotsas, E.: Monte Carlo simulation of the influence of drying conditions on the spray agglomeration process in a continuously operated horizontal fluidized bed, Proceedings of 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA

  601. Singh, A., Tsotsas, E.: Modeling the agglomeration of spray-dried milk powder in a spray fluidized bed, Proceedings of 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA

  602. Janocha, M. Hussain, F., Tsotsas, E.: Direct numerical simulation of sessile droplet drying under varying convective conditions, Proceedings of 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA

  603. Müller, D., Briest, L., Bück, A., Tsotsas, E.: A two-zone continuum model of heat and mass transfer in Wurster fluidization, Proceedings of 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA

  604. Rieck, C., Bück, A., Tsotsas, E.: Estimation of the dominant size enlargement mechanism in spray fluidized beds, Proceedings of 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA

  605. Gruber, S., Vorhauer, N., Schulz, M., Xu, X., Hilmer, M., Thomik, M. Tsotsas, E., Schuchmann, H., Foerst, P.: Experimental investigations on freeze-drying of particulate matter by using neutron imaging, Proceedings of 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA

  606. Kolan, S., Wang, R., Hoffmann, T., Tsotsas, E.: Homo and Hetero agglomerate formation of nanoparticles in a spouted bed, Proceedings of 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA

  607. Lu, X., Tsotsas, E., Kharaghani, A.: Drying of capillary porous media simulated by coupling of continuum-scale and meso-scale models, Proceedings of 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA

  608. Mezhericher, M., Rieck, C., Razorenov, N., Tsotsas, E.: Ultrathin coating of particles in fluidized bed using aerosol of submicron droplets, Proceedings of 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA

  609. Briest, L., Vorhauer, N., Tretau, A., Wagner, R., Tsotsas, E.: Microwave drying of wet clay in pilot-scale plant, Proceedings of 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA

  610. Thomik, M., Briest, L., Vorhauer, N., Gruber, S., Först, P., Schuchmann, H., Tsotsas, E.: Evaluation of methods to represent the structure in tomographic images of freeze-dried porous media, Proceedings of 22th International Drying Symposium (IDS2022), 26-29 June 2022, Worcester/USA

  611. Hussain, F., Chen, K., Jaskulski, M., Piatkowski, M., Tsotsas, E.: Experimental study of the parametric impact on size growth of maltodextrin particles in counter-current spray dryer, Powder Technol., 409 (2022), 117792

  612. Bhaskaran, S., Pandey, D., Surasani, V.K., Tsotsas, E., Vidakovic-Koch, T., Vorhauer-Huget, N.: LBM studies at pore scale for graded anodic porous transport layer (PTL) of PEM water electrolyzer, Int. J. Hydrogen Energy, 74 (2022), 31551-31565

  613. Gruber, S., Thomik, M., Vorhauer-Huget, N., Hans, L., Tsotsas, E., Foerst, P.: The influence of local microstructure inhomogeneities on local drying kinetics during freeze-drying, Pharmaceutics, 14 (2022), 2132

  614. Milicic, T., Altaf, H., Vorhauer-Huget, N., Zivkovic, L.A., Tsotsas, E., Vidakovic-Koch, T.: Modeling and analysis of mass transport losses of proton exchange membrane water electrolyzer, Processes, 10 (2022), 2417

  615. Wang, R., Singh, A.K., Kolan, S.R., Tsotsas, E.: Investigation of the relationship between the 2D and 3D box-counting fractal properties and power law fractal properties of aggregates, Fractal Fract. 6 (2022), 728

  616. Singh, A., Tsotsas, E.: Agglomeration of spray-dried milk powder in a spray fluidized bed: A morphological modeling, Processes, 10 (2022), 2718

  617. Faridi, I.K., Tsotsas, E., Heineken, W., Koegler, M., Kharaghani, A.: Spatio-temporal prediction of temperature in fluidized bed biomass gasifier using dynamic recurrent neural network method, Appl. Thermal Eng. 219 (2023), 119334

  618. Rodrigues, S.J., Vorhauer-Huget, N., Richter, T., Tsotsas, E.: Influence of particle shape on tortuosity of non-spherical particle packed beds, Processes, 11 (2023), 3

  619. Akbas, S., Chen, K., Hoffmann, H., Scheffler, F., Tsotsas, E.: Investigation of island growth on fluidized particles coated by means in aerosol, Processes, 11 (2023), 165

  620. Men, J., Kolan, S.R., Massomi, A., Hoffmann, T., Schmidt, J., Tsotsas, E., Bück, A.: Formulation of nanostructured heteroaggregates by fluidization technologies, Chem.-Ing.-Techn., 95 (2023), 107-113

  621. Li, X., Chen, K., Wie, X., Jin, H., Wang, G., Guo, L., Tsotsas, E.: Distribution characteristics of salt crystals in a supercritical water fluidized bed reactor with CFD-PBM coupled model, PowderTechnol., 420 (2023), 118357

  622. Pour, Y.D., Krasovitov, B., Fominykh, A., Hashemloo, Z., Kharaghani, A., Tsotsas, E., Levy, A.: Combined effect of acoustic field and gas absorption on evaporation of slurry droplet, Drying Technol., 41 (2023), 767-782

  623. Lu, Xiang, Tsotsas, E., Kharaghani, A.: Scale transition: Pore network study of how pore structure affects the macroscopic parameters of the continuum model for drying,Drying Technol., 41 (2023), 948-967

  624. Vorhauer-Huget, N., Thomik, M., Gruber, S., Först, P., Tsotsas, E.: Pore network simulation of heat and mass transfer during freeze-drying of porous media, Proceedings of the 8th European Drying Conference (EuroDrying 2023), 4 - 7 July 2023, Lodz/Poland

  625. Briest, L., Dharmananda, P., Tretau, A., Wagner, R., Tsotsas, E., Vorhauer-Huget, N.: Proceed, Proceedings of the 8th European Drying Conference (EuroDrying 2023), 4 - 7 July 2023, Lodz/Poland

  626. Chen, J., Lu, X., Kharaghani, A.: Evolution of pore structure during the drying of porous media, Proceedings of the 8th European Drying Conference (EuroDrying 2023), 4 - 7 July 2023, Lodz/Poland

  627. Gruber, S., Thomik, M., Vorhauer-Huget, N., Coppens, F., Tsotsas, E., Först, P.: In-situ analysis of the 3-D microstructure and its impact on the freeze-drying kinetics, Proceedings of the 8th European Drying Conference (EuroDrying 2023), 4 - 7 July 2023, Lodz/Poland

  628. Pour, Y.D., Krasovitov, B., Fominykh, A., Hashemloo, Z., Kharaghani, A., Tsotsas, E., Levy, A.: Spray drying of slurry droplets: effect of acoustic field and gas absorption, Proceedings of the 8th European Drying Conference (EuroDrying 2023), 4 - 7 July 2023, Lodz/Poland

  629. Hashemloo, Z., Pour, Y. D., Krasovitov, B., Fominykh, A., Levy, A., Tsotsas, E., Kharaghani, A.: Intensification of spray drying by absorption and desorption of soluble gases investigated experimentally at the level of single liquid droplets, Proceedings of the European Drying Conference (EuroDrying 2023), 4 - 7 July 2023, Lodz/Poland

  630. Hussain, F., Ali, F., Jaskulski, M., Piatkowski, M., Tsotsas, E.: Prediction of spray dried product properties using machine learning algorithms, Proceedings of the 8th European Drying Conference (EuroDrying 2023), 4 - 7 July 2023, Lodz/Poland

  631. Bürger, L.V., Jaskulski, M., Kharaghani, A.: CFD simulations of agglomeration in counter-current spray drying with fines return, Proceedings of the European Drying Conference (EuroDrying 2023), 4 - 7 July 2023, Lodz/Poland 

  632. Kolan, S.R., Wang, R., Hoffmann, T., Tsotsas, E.: Mixing sub-micron particles in a ProCell type spouted bed,Powder Technol., 428 (2023), 118828

  633. Thomik, M., Faber, F., Gruber, S., Foerst, P., Tsotsas, E., Vorhauer-Huget, N.: A non-isothermal pore network model of primary freeze drying, Pharmaceutics, 15 (2023), 2131

  634. Fischer, J., Rodrigues, S.J., Kriegeskorte, M., Hilse, N., Illana, E., Scherer, V., Tsotsas, E.: Particle-particle contact heat transfer models in thermal DEM: A model comparison and experimental validation, Powder Technol., 429 (2023), 118909

  635. Guo, S., Chen, K., Tsotsas, E., Shang, F., Jin, H., Chen, Y., Guo, L.: A large-eddy simulation study of the transcritical mixing process in coaxial jet flow under supercritical condition, J. Supercritical Fluids, 203 (2023), 106080

  636. Rodrigues, S.J., Vorhauer-Huget, N., Tsotsas, E.: Prediction of effective thermal conductivity of packed beds of polyhedral particles, Powder Technol., 430 (2023), 118997

  637. Sourya, D.P., Panda, D., Kharaghani, A., Tsotsas, E., Gurugubelli, P.S., Surasani, V.K.: Lattice Boltzmann simulations for the drying of porous media with gas-side convection-diffusion boundary, Phys. Fluids, 35 (2023), 113324

  638. Kolan, S.R., Wang, R., Hoffmann, T., Tsotsas, E.: Mixing nanoparticles in a ProCell type spouted bed,  Powder Technol., 431 (2024), 119129

  639. S. Bhoi, Kolan, S.R., Bück, A., Tsotsas, E.: Population balance modeling of formation and breakage of nanoparticle agglomerates in a spouted bed, Powder Technol., 433 (2024), 119271

  640. Wu, W., Chen, K., Tsotsas, E.: Prediction of particle mixing in rotary drums by a DEM data-driven PSO-SVR model, Powder Technol., 434 (2024), 119365

  641. Faridi, I.K., Tsotsas, E., Kharaghani, A.: Advancing process control in fluidized bed biomass gasification using model-based deep reinforcement learning, Processes, 12 (2024), 254

  642. Alkadhem, A.M., Mohamed, H.O., Kulkarni, S.R., Hoffmann, T., Zapater, D., Musteata, V.E., Tsotsas, E., Castano, P.: Shaping technical catalyst particles in a bottom-spray fluidized bed, Powder Technol., 438 (2024), 119602

  643. Chen, K., Li, Z., Akbas, S., Tsotsas, E.: Monte Carlo modeling of particle agglomeration during polymer pyrolysis in bubbling fluidized bed, Fuel, 367 (2024), 131487

Letzte Änderung: 28.03.2024 - Ansprechpartner: Webmaster